Galvatronus Cannon for Eris Lunacyte
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bigger, more G1-ish cannon for MMC's Eris Lunacyte figure
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wasn't satisfied with the stock cannon barrel on MMC's Eris Lunacyte.
So I modelled my own! Fatter, longer, more threatening! (hmm… hope I don't need the “for adults only” box checked!)
Printed with a very old spool of translucent orange PETG, using a .6mm nozzle, .1mm layer height, and no supports. Fairly slow, low fan, and boost the flowrate a little will enhance translucency. The ‘tab’ of the base is the top/front, so run the seam up the opposite side.
Also looks good in purple!
The original cannon body is glued at the pins - I used a scalpel blade in the seam, worked it around to loosen things up. Eventually a small ‘crack’ noise happened and it came loose. Holds together fine without glue now. Be careful, YMMV.