Flashlight icosphere diffuser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
since the attachment of the original diffuser was way to big for my torch, I made this version of it. I tried to…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
since the attachment of the original diffuser was way to big for my torch, I made this version of it. I tried to deviate the light a bit more with a sphere within the outer "bulb".
My flashlight has an outer diameter of 28.9mm
I designed it from scratch but the Idea/inspiration comes from the_nerdling:
https://www.thingiverse.com/thing:1924375
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Yes
Supports:
Yes
200
Infill:
38
Filament:
PolyMaker PLA Transparent PLA
Notes:
I used Tree supports, and a Brim for better adhesion.
Printed 40 mm/s and 0.2 mm Layer height.
Infill: 10% @ Cross 3d (looks very cool in my opinion:)
Wall line count: 5 (so that the bottom part has 100% infill)
Category: Hand Tools