1 / 1
Onewheel XR Textured Rear Footpad — zdjęcie 1

Onewheel XR Textured Rear Footpad

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Rear footpad for Onewheel XR with printed grip tape texture

Ocena
0 / 5
Polubienia
3
Pobrania
97
Wydruki
0
Wyświetlenia
726
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Rear footpad for Onewheel XR with printed grip tape texture. Slide M5 nuts into 
the rear slots and secure with M5x20 bolts (same as stock).

The .3MF file should be used with BambuStudio or OrcaSlicer, and the STL is 
pre-rotated to the suggested print orientation. You can customize the footpad
using the .STEP file, but you will have to add your own texturing.

Suggested print settings:
PLA+ or stronger
2 walls
Brim
No support
20% grid infill

Tagi