Makarvex - The Makita jigsaw adaptor for Festool rail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adaptor plate for my Makita jigsaw so that it will run on the back of the Festool rail.I love my Festool,…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 509
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is an adaptor plate for my Makita jigsaw so that it will run on the back of the Festool rail.
I love my Festool, but the Carvex is eye watering expensive here in Australia, even for Festool!
I've made this adaptor plate for my $100 Makita Jigsaw so that I can make straight cuts. I use it primarily for finishing plunge cuts with my TS55 track saw.
I've also included a an adaptor for the standard Festool 27 mm hose to the Makita Jigsaw.
For reference the jigsaw is a Makita 4329 (https://www.makita.com.au/products/power-tools/platform/corded-power-tools/jigsaws/4329-d-handle-jigsaw). This adaptor will probably fit other Makita jigsaws, but you'll need to try as I don't have access to any others. Please leave a comment if it fits your model.
The only hardware you need in addition to the prints is 2 x M4 6mm nuts. Bonus - the M4 nuts fit the Allen key that's carried on the jigsaw.
Note - This is designed and tested for the Festool rail. I believe the Makita rail has an anti-tip lip on the rail that interferes with this guide. I've added a beta version for the Makita rail. Please leave a comment to let me know how well it fits as I'm unable to test.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Yes
Resolution:
0.15
20%
Filament: Hobbyking PLA Blue
Notes:
Printed with two perimeters. Seems plenty strong enough.
Category: Machine Tools