1 / 19

Clampy - A modular desk toolbar extension

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ole

@Ole_194138

This thing is a modular desk extension for keeping books, stationery and private things at its place and away from the…

Ocena: 5 / 5
Polubienia: 19
Pobrania: 47
Wydruki: 1
Wyświetlenia: 703
Oceny: 1

Aktualizacja u źródła: 12 kwi 2022

Informacje o modelu

Źródło: Printables
Kategoria: Office
Licencja: Creative Commons — Attribution

Szczegóły Pliki (14)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (32)

This thing is a modular desk extension for keeping books, stationery and private things at its place and away from the desk working area.

Print Settings

Rafts:

Doesn't Matter

Supports:

Yes

Notes:

I had to invest some time modding and calibrating my printer. Now, i also got better idea of how to get perfect fitting of things like these.

Try calibrating your printer with adjusting filament flow rate to get parts that neither get a trough nor a mound on the top surface. Good test part for adjusting this may be a 1x1x1cm block. After it has a plane surface on the top, try printing parts, that are put together like here e.g. the hook and one mount element. If they don't fit yet, you are probably still feeding more filament per layer as needed. The noozle pushes that to the borders and plugged elements won't fit.