Better Elegoo Mars 5 Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a better top handle for the Mars 5 Ultra SLA 3D printer.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 83
- Wydruki
- 1
- Wyświetlenia
- 781
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a better handle for the Elegoo Mars 5 Ultra. This handle is large enough to fit any hand while keeping a low enough profile so as not to appear large and clumsy. The diameter is such that it fits comfortably in the hand. The back piece serves to reinforce the handle as well as the cover and prevents cracking or damage to the cover caused by mounting. The large backing piece disperses the forces of the handle. On my particular printer, installing this handle eliminated the natural bow the cover came with from the factory and made the cover feel less flimsy. This can be printed on either the Elegoo Mars 5 Ultra or FDM printers. Uses simple to obtain hardware so as not me make installation unnecessarily complicated. The debossed letters can easily be filled to provide a great matching appearance with your printer.
HARDWARE:
2) M4 X 30 Button Head Cap screws
2) M4 washers (preferably large fender washers)
2 M4 hex nuts
RECOMMENDED RESIN/FILAMENT:
Siraya Tech Build 3D Printer Resin - Smokey Black
3DXTech PETG+CF
TOOLS:
3mm hex key
5mm drill bit (to drill hole in Elegoo door; allows for a bit of play)
4.5mm drill bit (to chase holes in handle and/or backplate if necessary)
Drill