Liczymy pasujące modele…
Volume spacer for the Fox 36 to reduce the air chamber. The spacers fit below the topcap and on original Fox spacers. Print: I've printed them in PLA just increased the perimeters a bit to 3-4 so they may handle the pressure better.
Dispenser for Red Bull cans. It is not so long as many others to fit in normal fridges. To assable it you need 8 M3x40mm screws. Everything fits onto a MK3/MK4 bed, also you can swap the filament to get Red Bull on the lower bar in a…
Due the small hole in Groot the water can leek and the saucer catches it. The saucer matches for this Groot: https://www.thingiverse.com/thing:4927120 I've printed the outside with some fuzzy skin, so it looks bit more natural.
These are volumne spacers fiting for the Fox Float X (and other) shocks. It's fitting tight onto the shaft, but it's working ;-) I attached also the Fusion File so you can modify it for your needs. The both models are the copied 0.4in³…
This Christmas star is inspired by the iconic Herrnhuter stars, renowned for their beauty and elegance. The default design measures approximately 520mm but can be easily scaled up or down. To create a larger version, simply scale the…
Beside the existing model for the 4 piston brakes (MT7/MT5), I've created the decoration rings for the 2 piston brakes (MT5 Trail, MT8, ….) It can be printed in PLA and need no support It can be printed in vasemode, but no need for this.
Holder for multiple things, the model is ~16cm high, but easy to scale down for smaller napkins or what you whant to put into. I've added some small supports on the lower edges
Simple twisted plant pot, easy to print in vase mode. its has a diameter of ~150mm at the boddom and ~180mm at the top, while it is 150mm height, so it can handle bit bigger plants Printing: I've used PLA and vase mode and it worked well.
This design provides a safe way to break off utility knife blades. Your stay protected, and the broken blade drops directly into the container. The box is equipped with a screw-on lid, allowing secure storage. Once it becomes full, the…
A spout for clean and controlled refilling of canisters/tanks, the thread is ~45mm Nut and spout can printed in any material, I've printed the seal in TPU but it may be possible without it.
These bumpers are fitting the currend and older SRAM cranks. They are styled not like the original SRAM bumpers, I used the design of my e.13 crank bumpers because these are a bit thicker. My current version is printed in TPU, you may try…
Volume Spacer to reduce the air chamber of the Rock Sox fork. It should fit for most Rock Shox forks: Pike Solo Air since 2014 Lyrik Solo Air since 2016 Yari Solo Air since 2016 BoXXer Solo Air since 2011 Revelation RC since 2018 I would…
A big funnel including a ventilation to fill up bigger tanks. The size of the funnel is 180mm in diameter and 170mm in height If you whant to have the object outside do not use PLA, because this will loose the shape ;-)
Mountings for the SRAM AXS charger to mount it in your workshop Printed in PLA and 10% infill
Variable holder for 2 Raspberry Pis, right now there are holders for Pi 4 and Pi 5. Due the modelarity there could be added other versions and maybe other devices. I power my pies by PoE using the HATs like https://amzn.to/4ioys3n or…
This 3rd hand has a 2x10mm magnet in the feet stick on metal surfaces and is easy to print and assemble I printed in PETG but I think PLA should also works
For the game you need 6 colors and of each stone 3 times every color. Here you can find the instructions on how to play https://www.ultraboardgames.com/qwirkle/game-rules.php There is an multi color version I've printed on the XL. I also…
Crank bumper for the ethirteen LG1 carbon cranks. I printed the part using TPU to have something flexibility
This camera mount can screwed to the wall or feet like the IKEA Lack enclosure The backplate fits for the Raspberry Pi High Quality Camera additional using the wide lense . The backplate uses M2 screws, I used taps for the M2 threads. You…
Spacer for the Anycubic Photon 4k to use magnetic sheet. Due the magnetic sheet the normal “signal plate” is to short and doesn't hit the endstop. I created multiple versions, but use only the 4mm version
Saucer for the Biasam planter for bigger ones you can scale them up, at these pictures there is 100% and 200%
I needed for my pump a new cover so I created a new one It has no thread, only for direct mounted tubes. Also the area for the sealing is a bit wider, I took a slice of an old bike tube als sealing. It is tight but works for 6 month now…
More variants for most of the Wera Kraftform drivers. Fully compatible to gridfinity and stackable.
Mounting for powerstrip to round table legs like of IKEA It's designed for 44mm diameter legs. Need: M4 screw and nut
Cable mount for the Nicolai G1, the original ones dosn't realy hold the cables at the bb Just printed it in PLA
As my bike doesn't have options to mount a bottle holder, I created this to mount a bottle to the downtube of my bike. Currently it fits for a 52mm diameter tube, maybe also a bit smaller. For mounting you need: 4x M3 square nuts 4x M3x10…
I mixed both models to fit the C35 working tools, into the Casals JS102 (or compatible tools) I seems to work, due I get no complains of a friend who use it. This is an Remix/Mixure of these both models: -…
After serveral years of usage the ceramic mill element getting loose, so I replaced the plastic insert thats holds the ceramic part tight. It fits tightly so depending of your printer you may scale it a bit up or use a bit of sandpaper if…
To wszystkie aktualnie dostępne wyniki.
