Liczymy pasujące modele…
This model comes in two different types, if you want just a figure then click on the figure folder, there is a version with supports and one without. If you want a posable action figure then click on the action figure folders, again, one…
I did not make this model, but I would have liked to. The movie is amazing and this print is also awesome.
This is a remix. I would really recommend checking out the original print thought, it is really fun have fun with the print :) 20% infill 0.02 mm layer height P.S. You might want to sand the axles down a little
Both pieces need supports . It should take less than an hour and a half in total. For the settings keep reading, for the story skip down below. The assemble it make sure all supports are cleared and slide the end without the ridges under…
This is a model plate of Giga Chad Giga Chad - Noun The name "GigaChad" indicates that the person is the ultimate Chad The plane should be printed at 100% infill on white filament for the best results, the stand can be printed on anything…
This set of coasters was inspired by a Celtic coaster set by Cordilon: https://www.printables.com/model/544275-celtic-coaster-and-holder I printed my at a spped of 70 20% infill (solid basically) I printed this on a marble pla…
This was a box made because I didn't have a box, enjoy. One of the boxes has holes in the bottom for less filament use and esthetics. 20% infill 0.2-layer height 200 degrees
This outstanding replica allows you to dive deep into the wonderful world of Star Wars. These Imperial Credit replicas will bring that extra kick to your next Star Wars game night, and they look great in a display case. These were printed…
This is #3 of my Star Wars Stencil series featuring the the Jedi order. This was printed at 20% infill on orange Hatchbox PLA It takes about 45 minutes, Happy Printing ;)
I got a new notebook and wanted to decorate it with something so i made this. I recommend taping this to a flat surface and spraying a thin coat of spray paint on whatever you want. I used PLA 20% infill.
This model is the second in a series of Star Wars stencils made for your enjoyment. It is the Star Wars republic. This was printed on and Ender Max Neo at 20% infill and takes roughly 30-45 minutes. Happy Printing ;)
So, I recently came into possession of the Sabacc card game from Star Wars… and I love it. It wasn't long before I realized that I needed something to bet with, so I designed these. I used various photos for inspiration (so if you see…
This stencil was inspired by another file but I didn't like the fit so I made in my opinion a better one. Please enjoy The first file is a bit thicker and more durable, but the second file is a bit thinner and takes half the time to…
This is an easy to print box to hold pencils, this should help with the upcoming school year.
This pick was created because the thicker the better. The thick nature of the pick allows a guitar players to play better riffs with a creamier tone. Thinner guitar picks have a buzzier sound. It is easy to hold because of the size and it…
This is the iconic image of Batman vs. Superman in plastic form. This should be printed at 100% infill Te rest of the settings are a personal choice.
The battles between hero’s and villains of the DC universe are legendary to say the least. This chess set is the perfect end table decor to flex on all of your nerd friends or the perfect way to engage in mental battle with anyone who…
This is the 4th and final stencil in my Star Wars series of Star Wars stencils. This one is of the credit symbol (the monetary unit in Star Wars) and is a bit fragile in some places so make sure to remove it carefully. This was printed on…
This is a card version of Nicol Bolas, God-Pharaoh from MTG Place a light on the base to illuminate the card Print in white filament for the best results 100% infill This is Black and White btw.
The coasters are based off of the TV show Gravity Falls, I highly recommend watching it. I recommend using two different filaments for contrast or just painting the images on the top. Happy printing :)
I was playing Jedi: Fallen order one day when I decided to create this.
This is another outstanding star wars inspired piece that allows you to dive deep into the wonderful world of Star Wars. These tokens work great as betting chips for sabaac or poker, these were printed with Giant Arm silk filament at 100%…
This is a very simple minimalist wall mount designed to hold 99.9% of baseball bats I recommend printing these on 25% infill and a strong infill pattern like gyroid Both files are the same, just remember to print 2 of them These are…
This model is designed to hold a battery pack for Christmas lights that attaches to a clarinet.
A Nintendo Switch game card case inspired by the crates from Star Wars Jedi Challenges . This 3D-printable storage box holds up to 16 game cards and keeps them organized in a fun, Star Wars–themed design. I recommend tree supports and…
This is not my original model, you should check out @Chirimorin for more stuff like this. The instructions for assembly can be found here: Happy Printing
Ok, ngl this was printed on a Bambu A1 mini with an ams, it only uses three colors and it turned out great. Print it at 100% infill and at whatever speed you please. Filaments: Sunlu Red PLA Elegoo White PLA CC3D Black Marble PLA P.S. I…
The concept of this model is that the image changes depending which way you look at it. One way it's batman, and the other way it's the bat symbol I recommend black filament for the best results, I used elegoo black filament happy…
Ok, there are a ton of different circuit gate templates, but this one is different cause it is very simple. I would recommend using a semi-flexible filament, so you don't break it on accident, but it doesn't really matter. There is a…
To wszystkie aktualnie dostępne wyniki.
