Liczymy pasujące modele…
Inspired by Albert van Dalen's Spoty dispenser: https://www.avdweb.nl/tech-tips/pcb/solder-paste-dispenser The dispenser is left-handed. If you want to have a right-handed version, mirror the model in your slicer or just hold it upside…
Not locking. Does not fit 3.5-inch drives. Requires 4 M3x5 countersink screws to mount.
Print with the big chamfer on the bed. No support is needed. I recommend printing with PETG. PLA can creep. Tap the screw holes with ¼-20 thread. Don't leave heavy and expensive stuff on this clamp. I have no idea if it will hold for long…
My setup: Schneider Kreuznach Componon 28mm f2.8 reverse mounted on the hood thread (M37x0.75) Tube lens: Carl Zeiss Jena 3.5/135mm (M49x0.75) It covers a full frame with noticeable vignetting at full aperture on the tube lens. Printed…
My setup: Objective: 10X EO M Plan Apo ELWD infinity corrected (M26x36TPI) Tube lens: Carl Zeiss Jena 3.5/135mm (M49x0.75) It covers a full frame with minimal vignetting at full aperture on the tube lens. Printed with PLA, 0.6mm nozzle,…
Designed for 0.6mm nozzle and 0.3mm layer height. You may need a knife to separate the individual hooks.
I printed in PETG and it seems to withstand the heat well. The ID is 6mm. The OD of the tip is 5.5mm. It can be a loose fit depending on your printer tolerance. The tip don't move much once I tightened the tip screw on my Pinecil. Not…
A tool for removing and installing the bezel for Wowtac A2S headlamp.
To wszystkie aktualnie dostępne wyniki.
