Liczymy pasujące modele…
This is a remix from ThatMasonKid . https://www.thingiverse.com/thing:4633978 Made the bag opening larger to make it easier to pull bags out. Reinforced inside of threaded area on barrel. Filament: PETG Layer :0.15 Nozzle: 0.25
This is a intermediate print in terms of difficulty. 3D print has tight tolerances. Well tuned printer highly suggested. Filament: PETG Print pins, press plate, soap drawer, press bolt & bar horizontal position. Print press housing top…
Filament: PETG Sneaker, shoe hanger for those of us who have pets that destroy footwear. This approach should keep your footwear out of reach. Print hook horizontal to bed.
Spinning carousel for holding remotes up to 28mm thick. Filament: PETG Layer 0.28 Carousel can take up to 2 inserts max.
Filament : PETG 6 Walls 12% Infill Hook hanger to top flange first slide around rail and snap into place. May have to help hanger nose around bottom of rail before it will snap up into place.
Old feeder broke up used existing bottle and designed a new feeder for it. Filament: PETG Red/Yellow Layer Height: 0.2 with tower support for perch area only. Sliced with Cura 5.0 using “exclusive” slicing tolerance due to threads.…
Filament: PETG Print orientation: Horizontal with support. Min 12walls 100% infill
Silk PLA Layer: 0.16 High Resolution Mesh File
Replacement lid for Pyrex glass oval bowl with optional vent lid. Material: TPU Layer: 0.2 Sliced with Cura 5.5 exclusive slicing tolerance @ 101%Scale
Print horizontal with support Filament: PETG 245/90 Fan 20% Walls: 20@ .4 Top/Bottom: 20 @ .2 Infill: 40% Gyroid 25% overlap with alternating walls
Filament: PETG Layer Height: First Layer 0.20 balance 0.10mm Color change: Layer 22
Printed in PETG Layer Height: 0.15 Sliced in Cura 5.0 with Exclusive slicing tolerance
Filament:TPU 85A/95A Fits W24mm x H34mm x D4.6mm clamp plate
Simple bracket to join 2 IKEA lack tables together. Filament: PETG Infill: 40% Layer Height : 0.2 5 Walls, 5 Top / Bottom Print in horizontal position.
3.5" / 87mm Square Filament: PETG/ASA Size insert using slicer to accommodate different dishwasher model dimensions as needed.
Filament: PETG - White Layer Height: .15/.2 Line Width: .4 Hotend Temp: 240c Bed Temp: 80c Print Slow 20-25mm/s with 100% part fan Message me for 25% Manufacture discount if you print with PETG
Filament: PETG Layer: 0.2 Sliced in Cura at 101% using “Exclusive” Slicing Tolerance
A vented enclosure that houses dryer sheets. Place in closet to keep clothes smelling fresh.
Filament: PETG/245c Layer 0.2 with .25 nozzle Needs to be glued after glass is in place. Approx 2/12 turn thread onto helping hand post. Step file attached if adjustment is needed.
Filament: TPU 95A Made for Graco Square Tube Designed Strollers Forward/Backward/Left to Right Locking Adjustment Step file attached should small adjustments be needed.
Filament: TPU95A Uniform scale to 29mm in the Z direction for 2" spring clamp
Sole protection for heels of sneakers or walking shoes. Modeled to 78mm wide. Print material TPU95A (7 grams) Print Time: 18 minutes Walls: 10 Top/ Bottom 2 Layers with Concentric Pattern Infill: 100% Concentric Pattern Speed: 25-30mm/s…
Skid shoe TPU95A recap for worn out skid shoes on MTD, Troy Bilt, Cubcadet Snowblower/ Snowthrower. Insert old worn out shoe into TPU95A Recap and bolt back onto machine. May have to to scale up/down .stl file based on how much the shoe…
Problem/Issue: Garage door weather seal on the bottom of the door has shrunk over the years from being in the direct sunlight. This has caused and opening approx 6" / 180mm on the left side of the door allowing rodents mostly snakes, mice…
Filament: ASA Drill 2 10mm holes 35mm apart. Screw or bolt top hole as needed. Emboss house number if desired.
Slip on soft case with stand and lead holder. Use a piece of filament for hinge to attach stand bracket … clear hole with drill if needed. Filament: TPU 85A Layer: 0.20 with support. This model is made for Harbor Freight Cen-Tech…
Filament: PETG Layer: 0.2 Print vertical, needs support, organic works great.
Filament : PETG Message me for 25% PETG Manufacture discount used on this model.
Speaker Floorstand was knocked over snapping mounting plate on top of pole. Replacement bracket made to slip over mounting pole. Align bracket to speaker wire exit. Use existing screw to attach speaker to bracket. Filament: PETG Matte…
Company branded coaster for sweaty cold glass, bottle or mugs. PETG - Glow in the dark for evening use outside. Message me for 25% PETG Manufacture filament discount used on this model.
Rear deck lawnmower skirt printed in two pieces then zip-tied and 3D pen welded together front and back using TPU. Filament TPU 95A
To wszystkie aktualnie dostępne wyniki.
