P
PrintablesGörbe Stúdió
Easy to print bird spikes
It is so to print Material: PLA/PETG etc. Size: 25cm long With 2 screw holes, but i fitted it with double sided tape
- Pobrania
- 293
- Polubienia
- 30
- Ocena
- 5
Wszystkie modele
Liczymy pasujące modele…
P
PrintablesGörbe Stúdió
Terrarium Glass spacer handle
This model is made for 4mm thick glass. Printer: Creality ender-3 Neo Material: Polymaker Polyterra PLA (210/60) Nozzle: 0.6 mm Layer Height: 0.2 Infill: 30% Grid Top/bottom layers: 4 No Support No Plate Adhesion Slicer: Ultimaker Cura
- Pobrania
- 193
- Polubienia
- 49
- Ocena
- 4,5
P
PrintablesGörbe Stúdió
Fishing line controller
I used eSUN white PETG and slower print speed. Brim 100% infill Normal supports
- Pobrania
- 147
- Polubienia
- 12
- Ocena
- 0
P
PrintablesGörbe Stúdió
Terrarium glass spacer
This model is made for 4mm thick glass Printer: Creality ender-3 Neo Material: Polymaker Polyterra PLA (210/60) Nozzle: 0.6 mm Layer Height: 0.2 Infill: 20% Cubic Subdivision Top/bottom layers: 4 No Support No Plate Adhesion Slicer:…
- Pobrania
- 73
- Polubienia
- 28
- Ocena
- 5
P
PrintablesGörbe Stúdió
Multi gear hardware
It's my first gear for a personal project.
- Pobrania
- 60
- Polubienia
- 9
- Ocena
- 0
P
PrintablesGörbe Stúdió
Terrarium feeder holder for geckos
I printed with Esun white PETG 0.6 mm nozzle 100% infill 235°C/70°C Support: no Brim: no
- Pobrania
- 60
- Polubienia
- 16
- Ocena
- 0
P
PrintablesGörbe Stúdió
Heart Box – Free 3D Printable Gift Box
📌 Description This heart‑shaped gift box is a clean, charming design perfect for Valentine’s Day, anniversaries, or any small heartfelt surprise. The lid features a raised bow, decorative heart cutouts, and a bold LOVE text. The model is…
- Pobrania
- 50
- Polubienia
- 11
- Ocena
- 0
P
PrintablesGörbe Stúdió
Raspberry Pi 5 Mount Bracket with heat sink holes
Made a holes for heat sink joint, and made a small support for the raspberry at the middle. If you use 2,5m screws and nuts under the mount you can support the raspberry panel from below.
- Pobrania
- 45
- Polubienia
- 6
- Ocena
- 2
P
PrintablesGörbe Stúdió
Tablecloth fastener
I recommend to print with PETG or ABS, or other similar flexible material. Infill: 100% Layer high: 0,2 Material :PETG Wall thickness : 3-4 walls
- Pobrania
- 24
- Polubienia
- 5
- Ocena
- 0
P
PrintablesGörbe Stúdió
Small Sunglass holder stand
Printer: Creality ender-3 Neo Material: R3D colorchange PLA (210/60) Nozzle: 0.6 mm Layer Height: 0.16 Infill: 10% Cubic Subdivision Top/bottom layers: 4 No Support Use small Brim and print upside-down. Slicer: Ultimaker Cura
- Pobrania
- 23
- Polubienia
- 1
- Ocena
- 0
P
PrintablesGörbe Stúdió
Renault modus seatbelt screw cover cap
Easy to print Material: PETG/ABS/ASA etc. Use skirt No support
- Pobrania
- 20
- Polubienia
- 7
- Ocena
- 0
P
PrintablesGörbe Stúdió
Easy to print laptop stand
Material: PETG 3 walls 15%-20% gyroid infill Nozzle: 250 °C Bed: 75 °C Maximum for 30mm thick laptops.
- Pobrania
- 20
- Polubienia
- 4
- Ocena
- 0
P
PrintablesGörbe Stúdió
Tisza party shopping cart keychain
If you want you can print with AMS , but i recommend to paint the back to white. Without ams it's easy to print and u can put the party together with glue.
- Pobrania
- 17
- Polubienia
- 3
- Ocena
- 0
P
PrintablesGörbe Stúdió
Oldschool bullet holder
It's enough to make with PLA. It has bullet hole with claws and use additional fabric to get stuck. It also has a hanging hole in the corner.
- Pobrania
- 13
- Polubienia
- 2
- Ocena
- 0
P
PrintablesGörbe Stúdió
Terraium glass spacer 7-6-5-4mm
Infill: 100% Material: PLA, PETG etc. Support: brim or skirt maybe Easy to print
- Pobrania
- 8
- Polubienia
- 4
- Ocena
- 0
P
PrintablesGörbe Stúdió
MTDGCS Chainsaw part
Material: ASA, ABS or stronger PETG recommended Support: normal Infill: 100% Easy to print
- Pobrania
- 6
- Polubienia
- 2
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.