Liczymy pasujące modele…
https://www.thingiverse.com/thing:3830316 presented a project to adjust Purging Volumes and provide smaller wipe towers with less waste. jltx did a great job on explaining how to use the tool. I also wanted a tool to test my bridging…
This is a case to hold the RFID sensor. The leads protrude from the back and can be plugged into a breadboard easily. I made it to hold my DIY Prototyping projects. It also supports Inventr.io kits. It snaps together and can be plugged…
This is a case I designed for my TFT IIC LCD Displays. It snaps together and can be plugged directly into a breadboard. Added a deep box that I used M-F jumpers to extend the pins out of the box Print Settings Printer Brand: Prusa…
I made this thing so it plugs into a breadboard. Then I added a deep box for it. In the deep box I use the standard M-F jumper cables. It snaps together no glue required. Can be opened up if you want to reuse the part Print Settings…
This is a case I made to house my ST7735 Displays. It snaps together requiring no glue and I used breadboard jumpers to expose the pins since they were so short on the part. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts:…
Wanted to do the 4x4 grids and the box but the original box only did 3x3. I had to shrink the box and lid to fit my Prusa Bed and I break the box into separate parts so that I could do a multi material print but ended up just doing a…
This is a case I drew to hold my SR-04 that I use for Inventr.io lessons and also for DIY prototyping projects. It snaps together requiring no glue. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: Yes Supports: No…
This is a case to hold the SR501 Motion Sensor for prototyping/DIY projects. It snaps together and requires no glue. I made it to support my Inventr.io Projects. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No…
Can be used with customizer. The corners need to be repaired after generating the stl. I wanted to print track for my 5050 LED strips. This worked for all my 12V and 24V strips with various number of LEDs per meter. Corners seem to work…
I designed this to simplify breadboard my use. My goal was to be able to print this on a single printer base. I know there are a lot of designs out there so look around for what best suits you. Having everything in one spot that I can…
Can be used with customizer. The corners need to be repaired after generating the stl. I wanted to print track for my 5050 LED strips. This worked for all my 12V and 24V strips with various number of LEDs per meter. Corners seem to work…
This is a case for a 4x 7- segment and a single 7 segment (5 digit). It is used for DIY and prototyping. I used a header connector inside the case to solder wires from the segments. This exposes them externally from the case. I used a hot…
I modified the GEN2 115 unit to accept a front and rear panel. These can be stacked and/or integrated into the GEN2 modular system. I used from aliexpress: 1 ea. XH-A901 Digital Amplifier Board Matching Tone Board DC Tone Board Treble and…
Integrates this cable management system with the 1324501-gen2-table-top-kit-v2-240.
To wszystkie aktualnie dostępne wyniki.
