Liczymy pasujące modele…
There are two types of mounts. One uses rubber cement/double sided tape to hold it to the back and the other uses M3x25 countersunk screws to be held in place. This is to clear the back which has about 3mm of clearance
You may want to rotate the print 45 degrees on your build plate so that the part cooling is not biased I recommend using 125% bridging flow, and disabling thick bridges disable slow down for overhangs in global settings turn on forced…
if you need any other combination you can go here to the original one. https://mods.vorondesign.com/details/X1OtCg3ZJQBmZ7LEU7LqQ BLtouch offset: x_offset: 26.6 y_offset: 9
print vertically, add brim if adhesion is not good and add fuzzy skin for grip https://cad.onshape.com/documents/d13e39564e0e5b00e78305cb/w/f8b8dd963e65954e513ddbf3/e/a93d04841e1c90d440275294?renderMode=0&uiState=6931d79bbd5a372fec2da91d
Bicycle flashlight holder inspired by Olight Use regular supports 50% infill materials - 2 zip ties - rubber band
Tried to make it print in place, but id just use some supports
use when you want to design an ebox
Simplified reference model for BTT octopus.
simplified model for BTT pi
Simplified reference model for Fly 5160 pro V1.5.
To wszystkie aktualnie dostępne wyniki.
