Liczymy pasujące modele…
Taking inspiration from the iconic Fiskars scissors with orange handles, I did a Fusion360 cad model as I broke the handles by accidentally dropping my scissors on the floor. It is not like the original, but brings the scissors back into…
I bought a cheap extendable paint stick from Lidl and designed a quick lock monopod adapter to support my Tikka Deerhunter rifle. I have now tested in at real hunts with excellent results. The original in PLA was perfect fit. I printed…
Using Fusion360 I created a CAD model of the original and made it 10mm lower. Printed in PLA with 100% infill and 0.20 layer on a Prusa Mini. Use supports and print with the opening upwards. Now the milk froth does not reach the milk…
A conical hose adapter to fit the Kärscher WD 5 P to a Makita cross-cut saw. I used PETG 0.20 with 50% infill and supports.
I broke the handle to my Lee cartridge reloading hand primer tool, so I CAD a new one in Fusion 360. I printed with PC Blend on Prusa Mini+ with 0.6 nozzle and 30% infill. Seems to work just fine. I am sure PETG will also work…
I printed in both PETG and ASA with 80% infill the the spiral part up, with supports on buildplate only 0.15 precision, and both are adequate as new. Carve out the support from the screw hole with 10mm drillbit and the smaller hole with…
A simple tool to clean primer pockets. I printed using PETG and 0.6mm nozzle, 0.3 layer hight and 15% infill. After cleaning 100+ cartridges, it still works nicely. Insert, rotate between fingers and remove. Tap bottom of brass against…
If the original Yaesu channel selector knob starts turning freely, print this simple replacement. I tested with both PLA and PC Blend (picture) on a Prusa Mini using 0.15 layer thickness and 15% infill and both worked fine. I recommend…
A cyclone in three parts, that you can print on a Prusa Mini (you will need to cut the funnel and the top into two parts with the slicer, and glue together with CA after printing. I used PETG with 20% infill both 0.4 and 0.6 nozzle with…
The neck rest chafes against the shoulders even in its highest position if you have a long back. This part provides 55mm additional height to the neck rest. I printed it with 0.6mm nozzle using matte black PETG and 30% infill on Prusa…
The Grohe aqua tunes holder broke so I cadded a new one in Fusion 360 and printed in PLA with 0.30 layer using 0.6 nozzle and 15% infill. I used organic supports. Use two M4x30 screws to fix it and re-use the M10 insert bolt from the…
I lost my lens caps to my Swarovski SLC 8x30WB binoculars, so designed and printed replacements using Fillamentum FlexFill TPU 98A on Prusa Mini with 0.6mm nozzle and 0.2 layer height with 30% infill (not that it uses the infill at all).…
When installing concealed mounting boxes for electrical installations behind drywalls or whatever material, you want to accurately and quickly find the proper place for the 73mm or 3" drill saw centering bit. There are good magnetic tools…
In Finland, grocery stores provide biodegradable bags at the fruit & vegetable counter. They are too small to hang on a standard 205x285mm rectangular waste bucket. This frame allows hanging them from the top. First line the bucket with a…
To wszystkie aktualnie dostępne wyniki.
