Liczymy pasujące modele…
requires support for v1 or flip and print if your bridging is good for v2, two will fit in a cooler. I printed v1 without support and just trimmed and filed the bad overhangs flat to save 50m of filament, thats why I moved the logo and…
modified to fit without tape, shortened the handle both directions about 1cm
made the shelf bigger and the plate stiffer added a 1deg angle to help keep it from tipping forwards
print the lid with supports, i used tree so it was easier to remove
use these when your carrier restricts your train to notch 7, 6, 5 or 4. save yourself a call from the NOC if your have really good bed adhesion you wont need a brim, i use them when i run the full set at once. print them on the side, no…
print vertically at your desired resolution, can be installed flat or on an angle
6 walls and top/bottom 25% honeycomb, 8x3mm bolts required to mount + rack hardware
After printing I drilled the holes out for ease of inserting m3 screws to clamp the model together. photos are before adding the additional screw mounts, it was fine with 3 but more is better? I used m3x6 but can get by with longer as the…
stock bracket interfered with the part cooling duct used two m3x10 bolts, stock may work, i didn't try switch mounts are threaded, re use stock hardware here print with the long flat edge touching buildplate supports touching buildplate…
To wszystkie aktualnie dostępne wyniki.
