Liczymy pasujące modele…
A scan from thingiverse: thing:341835 I changed the shape and size to fit a Build-a-Bear. For the 12" doll or American girl doll shoe, I shrunk down the size of the clog and then erased enough of the inside that it will slip onto a dolls…
Roman Helmet copied from the museum in Olympia Greece.
Use for small lengths of Filament. Large and small sticks that can be used in hot or cool melt glue guns. I prefer a glue gun with temperature control, dedicated to filament.
This piece was created for a theatre production of the Addams Family, one of the ancestors will wear this hat, once it has been fully printed I will try to post a head measurement. I am currently printing on a Crealty belt in order to…
This design is based on a chapstick tube, but in XXL scale, that could be used for deodorant. In order for the screw to hold I inserted a very slender knitting needle for strength.
This STL is too big to print on the printers I have but would be incredible in full scale! I broke it down into 2 smaller wings for my purpose. However, this could be modified to fit around a head, ball, smaller sculpture etc.
I am using this model on a costume, to give the appearance of a spine, therefore does not need to include the whole column of disks. The protrusions will be glued to the garment giving it the desired skelatel effect.
Made for UTRGV production of Metamorphosis. Winds for Hades.
Bernina Hand Wheel Replacement. Modern Bernina clip on hand wheel.
One time print worked excellent. If I were to print it again I would add pins or puzzle pieces for the peels to slide into place, feel free to test it out yourself. The head measures 22" when finished. I had to increase my STL by 2717.18%…
Prints in 2 pieces and then inserts together. Sits flat on a table. Thanks to Felimanue and Zeyko. https://www.printables.com/model/194043-little-whale https://www.thingiverse.com/thing:2187661
Print new collar stays. Hold the shirt collar in place beautifully.
Antique spinning wheel bobbin. Adjust in size in slicer. Use glue to hold snap together.
Tooth Planter Trellis, perfect for your local dentist
Easily print this 2 piece of hoof shoe for costumes. It is made for a 10.5 USA Mens Converse shoe to fit inside and glue down to support the actors foot. Mirror both pieces for right side.
Original face scan mask, smooth on the inside.
2 Styles. Easy to print, no support Spinning wheel bobbin, res-ze in slicer. This fits my Jumbo Louet as it is. Use glue on the outside of the joint, you don't want it coming apart while you are spinning <3 2
Quickly change your Clark Kent figure into SUPERMAN and back again Wear or share your glasses. Henry Cavill and Christopher Reeves styles. I didn't print these, but I could not pass up the opportunity here. The models were borrowed from…
A very ecconomical version of a spinning wheel bobbin, this one is a Jumbo for my Louet s10x.
Seeing Stone Eye Piece Spiderwick Chronicles I used a 2mm knitting needle as the pin, a nail etc would work.
Majacraft jumbo bobbin. This works with the 3D flyer I made, I am not sure how well it works with a Majacraft Jumbo flyer. The picture was a practice model, so it's a bit different.
A larger Flyer for the Majacraft spinning wheel is sometimes called a plying flyer. This is a work in progress, but it is close enough to share. If this is useful to you please post pictures, thank you! I also have a bobbin that fits.
I used a gelatin prosthetic recipe to create flexible skin prosthetics. I also printed the possitive (thing:3087126) and attached it to the breast plate. This made the metalalic cord interact with both print and prosthetic.
Based on the Christus emblem used by the Church of Jesus Christ of Latter-day Saints.
My Q warranty ran out on my Quick Chopper, here is the gear I used to replace the broken part. I used PETG It may have shrunk a bit too much, I am using mine and will update how it works.
Print this file then apply heat to the back and carefully mold it around your face.
Theatre prop for a Grand Guignol production. Placing bolts sideways makes them stronger. I replaced my plastic bolts for metal. Super glue for bolts and caps 1 yard or meter X ¼" or 6.35mm chord, rope, or yarn 11 Washers holes ⅓" inch or…
I printed this and then gutted it from behind. I glued it onto upholstery foam and then added fun fur. Loved how it turned out and wanted to share.
Check the temps on g-code, I raised the temps 10' for my personal prints. The g-code makes a 21" hat form, this fits my 12 year old. The code barely fits on the platform of my mk3. When I converted if from the original stl's I enlarged it…
With mold release, fill with platinum cure silicone. Holes added for stitching to fabric.
I am playing with this design as a possible iron on. But I would love to see what you do with it!
Easy Print, Print 2 then glue together and insert foam-covered fabric for the cushion. The benefit of never getting poked in the arm!
Part of an idea to create a spinning wheel. no glue, spaces left for bearings.
Use this decorative trim instead of trying to replace the veneer on old furniture. very easy to change lengths and widths on the slicer. My corner didn't fit perfectly, I used a heat gun and carefully moulded it into place.
Tight fighting Gear replacement for Rose or Suzie? I bought mine second hand, and the wood had shrunk and cracked, so it wobbled. This one is a very tight fit so I didn't need glue or anything. I did add a hole for a small screw to help…
With mold release, fill with platinum cure silicone.
I haven't printed this yet. However I plan to print it in 2 pieces and then glue it together.
Probably needs too many supports for a great print, I would like to remake these someday in an easy print form.
This size works great for a set of 6 regular-sized dice with various sides. After printing, sand down the female and male pieces to make sliding smooth and easy to pull apart. Tapping with a mallet will help them glide in and out of place…
By printing 5 of these models you can place them in a Louet spinning wheel. I used 3/8" dowels for strong pegs. The length of each wrap on the skein is about 1 yard, 39". I simply detached the foot pedals and hand-wound the bobbin onto…
Lava Dragon made into a mask large head size 24". Scale shaped screen has been removed for eye sight.
Cucumber, pickle slice Glasses. Think Isma from Emporeres New Groove <3!
For my Newcomb Weaver's Delight, semi-automatic weaving loom circ 1900. This shuttle can be packed with rags for throwing a rug. I used a jumbo knitting needle to stuff it, but a dowel would work well.
Replacement handles for a Dorothy table loom.
Probably needs too many supports for a great print, I would like to remake these someday in an easy print form.
Singer Knitting Machine 360 replacement back toggle
Ai created inspired by @AR3DP Mini Animals
Probably needs too many supports for a great print, I would like to remake these someday in an easy print form.
I made this specifically for a Bernina cord to fit through. My hole cuts were 2.5" in diameter, scale accordingly. This is printed with as little support as possible, I only add support to the brim.
Probably needs too many supports for a great print, I would like to remake these someday in an easy print form.
Probably needs too many supports for a great print, I would like to remake these someday in an easy print form.
Pallet is made to hold a variety of skin-toned makeup colours. Labelled by colour and kit each colour comes in. I added clear vinyl and a small amount of makeup to each circle. Then the pallet can be used to determine the best-coloured…
Bobbin plug replacement for Jumbo Bobbins on a Louet S10C spinning Wheel.
4 legged table modified to 2 legs for tiny printability
Karuba Expansion Meeples, not affiliated with Karuba
Karuba is out of print! The one I purchased from eBay had missing pieces. I designed the replacement and then made a whole expansion set! Plus, an easy-to-file shelf system to make gameplay faster. Enjoy. Not affiliated with Karuba.
Louet spinning wheel, replacement part. Slot where the spindle sits, and attaches to the tower. Printed 100% solid. I used PLA but PETG or a higher melting temperature might be prefered. I haven't tested it on fast plying.
Shelf organizer for Karuba, Number slots. Fits printable tiles and original cardboard pieces. 7 shelves fit per box.
To wszystkie aktualnie dostępne wyniki.
