Liczymy pasujące modele…
I came to the conclusion from user feedback and even Prusa that my previous duct had some room for improvement. Inspired by the MK4S duct, I went through many iterations of the duct to distribute air evenly around the nozzle but to the…
This design has been superseded by this one . Rebuilt the fan shroud to concentrate and extend airflow to the front of the nozzle. The shroud reaches into the fan to improve ducting to the exit. Here's a contrast between old and new…
Added a 60° tail to the MK4 version of the strain relief. Made some additional cosmetic tweaks to the original files. Model is backwards compatible with MK3/S/S+ heatbed. Print per Prusa recommended settings. Update 10/6/23: The …btm.stl…
Lowered the bottom face of the shroud 0.6mm to accomodate a silicone sock and added some baffling to improve side flow. The fork tips are connected to the print support for better printing with PC to help them adhere to the print sheet.…
I changed my hotends to Phaetus and needed to lock rotation for easy nozzle change. The adapters are confirmed to work with TriangleLab as well. Compatible with both types, ST/HT. Fits between extruder body and hotend and uses the…
This version of the idler was inspired by @MihaiDesigns_9605 work to root cause inconsistent extrusion as outlined in his investigation found here . I've been printing with this idler for a few months on my two MK3S+'s and have noticed an…
Added a 60° tail to the MK4 version of the strain relief. Made some additional cosmetic tweaks to the original files. Model is backwards compatible with MK3/S/S+ heatbed. Print per Prusa recommended settings. Update 10/6/23: The …btm.stl…
Drain adapter snaps onto the chiller drain flange as shown in the picture above. It can be installed with the drain plug already attached. If it's too loose or too tight you can scale the print accordingly but it should fit well as…
Convenient upgrade to x-carriage. I split the x-carriage back housing into two parts for easy extruder harness changes. Housings have been updated with latest R7 changes for bearing support. The decimal revision represents my geometry…
Update 24/1/21: Added a grille option STL. Update 23/10/6: Strengthened the snaps to be more robust and not break off so easily. The duct is designed to be as light as possible and come off easily so as to not damage extruder in the event…
Simple strain relief that is quick to print. The clip slides into the bracket and is trapped when attached to the motor with a zip-tie. The clearances are designed so that the fit keys into the layer ridges so the clip will have a…
The Knob has a better ergonomic feel when scrolling and enables fast rotation. The hub aligns to the split in the rotary switch and the spline engagement diameter was tweaked for a more stable fit. The two piece design looks great in one…
Update 24/5/8: Updated all files based on user feedback. Please redownload if you're having any issues with the files you downloaded previously. It's helpful to assemble both covers onto the frame and cycle the LCD cover on/off a few…
Inspired by xiphmont's implementation, I created my own files for the enclosure and pi3a+ frame for this update. Please follow xiphmont's guide to install the pi3a+ and perform the upgrade. The installation was flawless for me with the…
To wszystkie aktualnie dostępne wyniki.
