Liczymy pasujące modele…
Uses two pegs from @KimJanosch https://www.printables.com/model/635620-skadis-skadis-universal-peg/files Print on its side to get the best strength. 0.2 layers in PLA or PETG and 4 perimeters. Automatic paint support and a wide brim. I…
Mlok foregrip for hunting rifle or airsoft gun. This model is made for a tapered screw. Printed in PETG with 0.2 layers, minimum 8 perimeters and fuzzy skin with 0.3 point distance and 0.2 thickness. I included the STEP file so feel free…
M-lok clamp for convoy s2 or any other flashlight with at outer diameter of 24mm. The clamp uses 2 M3x10 screws and 2 M3 nuts. The pressure switch is also from convoy and fits in with a smal bit of dubble sided tape or some glue. Can be…
Clips for keeping the IKEA SCHOTTIS blinds up when you don't need them down, since the clips that comes with the blinds are bad. Print 3 per blind in PLA or PETG, 4 perimeters. I include the STEP if you want to modify it.
you will need Print out : 2 of main.stl 2 of lid.stl 2 of printable nut.stl (print on 45 degree side) 1 of handle (print upright with wide brim) Buy: 400mm M12 threaded rod 12 M3x10 screws 12 M3 nuts 20kg concrete bag Glue the nuts in the…
Prints without support, 0.2 layers and 4 perimeters
Muzzle cover so you don't get dirt in the barrel. Made with thinner parts on the top and bottom so if you fire with it still on it will splitt into two parts and fly away. Made for a Beretta A300 but probably fits different shotgun…
Muzzle cover so you don't get dirt in the barrel. Made with thinner parts on the top and bottom so if you fire with it still on it will splitt into two parts and fly away. Added the STEP if you want to change something.
A common problem with magnet bases is that the plastic switch breaks, here is a replacement switch and a STEP file if you want to change it. Should work with all 50mm wide models of magnet bases, Noga, Mitutoyo, Eclipse, Diesella and all…
Muzzle cover so you don't get dirt in the barrel. Made with thinner parts on the top and bottom so if you fire with it still on it will splitt into two parts and fly away. Added the STEP if you want to change something.
You can fit 2 extra 3.5 inch HDD in the roof fan holes of your Fractal Define C, for this print you will need 4 HDD screws (you get a bunch with your case) and 4 M3x10 screws with 4 nuts. to mount the thing to the fan hole slots in the…
To wszystkie aktualnie dostępne wyniki.
