Liczymy pasujące modele…
These should be drop-in 3D printed replacements for the original metal guides that can become worn/bashed, causing excessive ball hop. The design also features an extended tip which closes the gap to the flipper. This further decreases…
Left and right in-lane frame guides. Designed to replace parts: B-12743 and B-12695 on Black Knight 2000 Pinball. May fit other sys11 / sys7-9 based on part number. Check out a video here:
This is just the post for the lever, the cross pattern should fit nicely into the Danco HYR271T Hydroright dual flush lever mechanism. This was designed to fit with the pinball flipper…
Really simple U-channel mount. Recommend printing in TPU. 1/8" groove should work for most marquees and pinball backglass. 1mm lip on back, and 2mm on front, with two 3mm screw holes to fix to the wall.
Files to print a bracket, light diffuser, lamp baffle and clips to keep it all together. The bracket is designed to be compatible with two of the existing metal baffle screws on the non-prototype mystic backbox door. To fasten this well,…
Dishwasher Dishrack Roller WP99002780 Suitable for when the bracket is still ok, but the wheel has broken. Snug inner fit, consider filing inside slightly depending on your printer settings.
Modeled after / for a WMS Full House pinball machine. Sized to use a 3mm screw with washer, or you may print the attached peg which should fit very snug to secure this with the leaf bracket.
The power switch bracket was completely missing, so this was made to allow a new power switch to be held in place similar to the original. Might be useful for other models / brands, if so, please comment :)
I needed a means to stick some toy basketballs to the top of my arcade machine. These mounts will screw into the air-valve of a ~~10cm toy rubber basketball, to give it a more stable means to be stuck to another surface. USAGE: Print and…
There are currently two versions. I designed it with a lightbox in mind, however, it then occurred to me we are specifically trying to avoid this from being noticed and looking like a button. Regardless, I've included the logo version as…
I designed this part as a replacement for woodrail pinball legs missing the bottom metal bracket that the leg leveler may attach to. This part should friction fit into the existing ½" hole of a wooden pinball leg. The threaded inside is…
About the StrongArm. This is an accessory for holding up a pinball playfield. It can be purchased from: https://www.pinballadventures.com/ This is a two part model, one part is for fastening to a wall. The holes are designed for standard…
To wszystkie aktualnie dostępne wyniki.
