Liczymy pasujące modele…
My first atempt, its not perfect but on right way. Added holes to screw in mini hook holders. And there is 3x8mm holes in middle of body sections if needed to add more weight with steel balls, weight can be added manualy in the middle of…
Printed with PLA+ 0.2 infill 10% no support Better if scaled up
Print in place no supports needed. 30 min. Any material can be used and any settings that suits you.
printed in 0.3 PLA+ Infill 20% Fuzzy skin used to make realistic web. Supports only on bed because of tiny web.
Uppgrade to Ikea “Chosigt” Printed in non high quality and looks great and is practical with the curve at the edge. No supports. Height: 142 mm Outlet: 7.5 mm ID, 12 mm OD Inlet: 95 mm ID, 98 mm OD
Printed in PLA+ Dimension: 20x20x5 cm No support 25% infill Colored in Prusa Slicer Alpha
Printed in PETG, easy to assemble, 20 cm long when folds out.
Printed with PLA+ 0.15mm No supports Diameter 10 cm Print time 3h 19min
This little holder is very funny thing to use with your printer. Printed under 1 hour, 0.30 PLA+ with brim, orientation flat side on bed no support. Infill 15%. Printed mine in black will print few more in different colors. Comments and…
Printed in PLA+ with supports can be printed in any material.
Just print in place no support, the big hole is for point finger so its more ergonomic when you squeez the handles. This clip can be used everywhere from household to workshop. Printed in PETG 20 infill. Pls rate and comment.
Print in place, bed support, and scrap scrap scrap…..time is money.
Custom made for Dualtron e-kick bike from Minimotors.
Aprox 83 mm in diameter and 5 mm thick. Not printed in highest quality. Added holes for securing.
Just a washer with wedge that prints in place, 5 min print on 0.30 , no supports. for better quality change layer height. Dimension diameter 20 mm height 2 mm hole 5 mm.
printed with 0.3 settings and PLA+ 20% infill, no supports.
As i often shoot with airguns with friend i came up with this idea, why not create a single box with place for 5 different ammo types in it so you dont have to take all the single ammo boxes with you. So i custom made this one with name…
printed in 0.15, 20%infill, works both with PLA and PETG. 20 min print. used support on build plate only. Beware printed pieces on pictures are not printed in optimal settings, it can be adjusted further if you want better overall finish.…
Got tired of looking at kid eating ice cream and get all clothes and hand full of melted icecream, well not anymore. Just print this in place and atach it to the stick and voila no more drip explosion. This is reusable just wash it. Pls…
This exclusive 26 min printed iphone stand is small and thin and stable, it sticks to the charging outlet on phone, fits phones with or without covers, looks good on table and usable for video calls where you dont need to hold the phone.…
Must have gadget at home, simple and usable. Added fuzzy skin to handle for better grip. The hole is little tight but you can change that for your needs just scale it upp very little in slicer. Printed in PETG Prusament No support Infill…
This is printed with PLA+, no supports needed, 0.20 quality, 20% infill print time 37 min, print is very stable you can change parameters if you want. Both long and shorter side of allen key fits into hole. Handle fits 2,5mm allen key.…
This button is made as replacement printed in PETG. No supports, Diameter 20mm thicknes 5mm. Takes only 9min to print with 0.30, various material and settings can be used.
Wery simple design Can be printed in any material and quality, no supports. This model is updrade to Ikea Rothult smart lock, no need for electronics or batteries. external parts needed: hook and double sided tape. Instructions: Screw in…
Diameter 33.5 mm Thickness 10.5 mm Printen on 0.1 detail quality Infill 15% Used support for hole Fuzzy skin on outer diameter
Print in place no support if big frame layed down, free to remix, choose quality by needs.
To wszystkie aktualnie dostępne wyniki.
