Liczymy pasujące modele…
I got tired of finding a toothpick or Popsicle stick and cardboard scrap to mix and apply epoxy. There are likely others here (I didn't look) but I like making things so I created this one. The OpenSCAD file is included so feel free to…
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
I designed this to print on my Prusa MINI printer, fit my drawer (2.75" tall, 12 7/8" wide, 19" deep), and fit my silverware. The OpenSCAD file is attached so you can modify as you want. If you don't know how ask and I'll create a new set…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
I needed increased height of the PCB holder so I created a taller base. I created two versions, one with slots (similar to the original) and one with only holes that prints without supports. The OpenSCAD file is included so you can revise…
Wydruk około 2,94 €–3,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Straight to right angle conversion for USB C cables. The cable this is designed for is listed below. It should be easy to convert to other cables with the included OpenSCAD file. This fits snug so it works as is. RTV or epoxy could be…
Wydruk około 0,53 €–0,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This a case for TI DP83TC813EVM evaluation board. There is a second top case if you wish to block the power input and instead power via USB. Assembly requires (4) 3mm hex nuts (example…
Wydruk około 1,23 €–1,50 € nettoWstępna wycena jednego wariantu
NOTE: Imported from Thingiverse with minimal updates to description but none to design… I recently purchased a Ryobi 40V weed wacker with expand it capability as my 10 year old gas model was no longer working great. Since I have one more…
I created this box to store little parts. I added supports and 100% infill around the hinge areas so I suggest using the the .3mf file if you don't have the mini. The lid will stop at 90 degrees as shown in picture!
NOTE: Imported from Thingiverse with a new one piece design… I created this Ryobi ONE+ battery holder after seeing one created by MichaelAtOz. I started from scratch with a new OpenSCAD program so this design is not based on MichaelAtOz's…
This wall mount was designed for Lectric XP3.0 54.6Vdc 2.0A charger (https://lectricebikes.com/collections/parts/products/charger). It may work for other chargers. I printed in PLA but PETG would be better for outdoor (garage)…
I made this to hold my solder and clean up my workbench. It's a quick and simple design. There may have already been something similar but I didn't look.
This holds two EZ Runner Grand or Creative Memories Jumbo tape runners. Other scrap-booking tape runners may work
NOTE: Imported from Thingiverse without updates… Only added some Gcode… I found a similar bracket on Thingiverse ( https://www.thingiverse.com/thing:1890399 ) but I decided to make my own because: 1) the customizer wasn't working:…
NOTE: Imported from Thingiverse without updates… The main purpose of the this cover is to allow you to put your keyfob in your pocket (or purse) and not accidentally press the buttons. This is a keyfob cover fits recent…
NOTE: Imported from Thingiverse without updates… This was designed to hold my RSA SecurID on the back side of my badge. The red ABS pictures show version 1 but the uploaded files are version 2 which has a better fit to the SecurID. The…
These are a set of center console trays that fit a Tesla Model 3 Highland front console. These also fit the Model Y Juniper but they don't fill the entire console. Let me know if you want a different divider configuration. I have another…
This is a case that's interchangeable with the case on new Nextruder nozzles. I ordered a hardened high flow 0.4 nozzle so the stock nozzle needed a new home. The OpenSCAD file uses some of my “library modules” so which I update all the…
These are a set of center console trays that fit a Tesla Model 3 Highland rear console. These also fit the Model Y Juniper! I have another model for the front console! If you keep cabin overheat protection on, PLA may work. I recommend…
NOTE: Imported from Thingiverse without updates… Per a request, this a remix of my Badge/SecureID holder to add a 2nd SecureID. Category: Other
Requires two 8-32 x 1" screws and nuts. Flat and lock washers are recommended. This is the cargo basket: https://lectricebikes.com/collections/baskets/products/cargo-pack
This bracket was created to mount the ramshackle birdhouse ( https://www.thingiverse.com/thing:107554 ) but it could be used for other purposes… In addition to printed parts, you'll need: (2) Hex bolts, Zinc plated steel, 1/4"-20 x 1"…
I use these OpenSCAD modules (library) in many of my models. Because they are used in many of my files, I put them all in one place. I may eventually make instructions or a how-to for use outside of my OpenSCAD files.
This is modeled in OpenSCAD so feel free to modify to your own preference. It's very CPU and memory intensive and I recommend 16 GB of memory. The LN file has a low detail version since the detailed version is 69 MB.
NOTE: Imported from Thingiverse without updates… The main purpose of the this cover is to allow you to put your keyfob in your pocket (or purse) and not accidentally press the buttons. This is a keyfob cover fits recent Jeep keyfobs.…
NOTE: Imported from Thingiverse without updates… This flashlight stand is based on my Trustfire 3T6 flashlight stand ( http://www.thingiverse.com/thing:618322 ). I have updated the OpenSCAD file to calculate the stand thickness so I…
NOTE: Imported from Thingiverse without updates… This is a replacement volume knob for a B&K REF 20 A/V preamplifier. My original was loose and I believed the set screws were striped. As it turns out I just didn't have the right Allen…
NOTE: Imported from Thingiverse without updates… The main purpose of the this cover is to allow you to put your keyfob in your pocket (or purse) and not accidentally press the buttons. The buttons are recessed with this cover so it will…
NOTE: Imported from Thingiverse without updates… This is a replacement battery cover for a Yamaha MCX-1000 MusicCast Digital Audio Server remote control. I purchased a used Yamaha MCX-1000 which had no battery cover. The pictures show an…
NOTE: Imported from Thingiverse without updates… Stand for Trustfire 3T6 3800 lumen flashlight. Instructions My settings are below but any setup should work ok. 0.3mm layer height low density fill (10%) normal (2) shells build supports…
NOTE: Imported from Thingiverse without updates… This flashlight stand is based on my Trustfire 3T6 flashlight stand ( http://www.thingiverse.com/thing:618322 ). I have updated the OpenSCAD file to calculate the stand thickness so I…
NOTE: Imported from Thingiverse without updates… This is a cover plug for a vintage superior electric variac. Instructions Built with 20% fill, .3mm layer height, and normal shells. Any build settings should be sufficient. Category:…
Use this fixture to position your blinds bracket. A spacer is included to evenly space if you have a large window with multiple binds. Alternatively there is a hole guide if you prefer to drill a pilot hole. This was designed for Levolor…
I created this flagpole ball (sphere) since mine was damaged last year. I've also included an end cap for the simple look. Additionally the end cap could be combined with an another model (like an eagle) as desired. I'm not sure how…
I created this (With Grok's assistance) to store my extra pressure washer hose and to see how good AI could do. Not bad since it figured out the thread size. It used the thread library ( http://dkprojects.net/openscad-threads/threads.scad…
If you can't reach where the chain is hooked, this tool makes installation much easier!
I used this thermistor ( https://makerparts3d.com/products/thermistor-cartridge-3x20mm-and-xh2-54-terminal-1m-cable ). Mounting requires one M3 Roll-In Tnut ( https://www.ebay.com/itm/358027552623 ) and one M3x12mm SHCS (…
To wszystkie aktualnie dostępne wyniki.
