Liczymy pasujące modele…
Fully articulated flexi dragon with a heart theme just in time for Valentine's Day. 2 Color print via AMS, single color print profile available too. No supports. Gyroid infill.
Cute Easter egg themed girl gnome. Matched our boy Easter Egg gnome Prints with no supports at this size. Sliced Single color, 2 color with layer change at the base, and original STL available.
Cute Shamrock themed boy gnome for St. Patrick's day. Single color and color change at base layer print profiles available. Color change at the top of the base clover print profile may need a pause added when you slice depending on…
Dragon My Feet flexi dragon would love to be printed and be your new best friend! Articulated Dragon with a silly face tested in PLA, 2 tone Silk PLA, and 3 tone Matte PLA.
Cute turtle with flexi feet. Prints at this scale with no supports.
Cute gnome with hearts on his base and hat. Check out our girl version too! single color .3mf, and 2 color .3mf, and STL available.
Cute Easter Bunny gnome just in time to print for Easter. Prints at this scale with no supports. riginal .stl files, sliced single color, and 2 color with change at base available. Gyroid infill 10% infill
Trick or Treat Smell My Feet Gnome I hope you have a LOT of teeny tine candy when this mischievous little guy comes knocking on Halloween night! You do NOT want to have to smell his feet! There is no telling where those 10 naughty little…
Cute little mushroom gnome just wants you to print him out and chill. File is set up for Matte PLA, and will print basic PLA as well. No supports needed at this scale. Arachne walls Gyroid infill 40mm/s initial infill 80mm/s initial layer…
Cute clover themed dragon for St. Patrick's day. Print one today to bring you a little dragon-luck! File prints 18in/48cm long dragon. Fits on smaller 180mm^2 printer plates. Prints with no supports at this size or smaller. Strength…
Cute Easter Egg wearing a bunny mask and ears with flexi legs. Printed at this scale with no supports. Prints 2 eggs one with polka dots and 1 with zig zag
Gnome themed picture frame for Instax Mini pictures. Support probably needed for inside of frame. 3mf and STL files available. *Update to Version 3 with 75% smaller file size *
Interior Door Key This is a printable replacement for interior door passageway keys that use a flat end, like you would find on a bathroom or bedroom. We used an FDM printer and printed this with 8 wall loops and 20% Gyroid infill. Our…
Cute Shamrock themed girl gnome for St. Patrick's day. Be sure to check out our boy Shamrock themed gnome! Single color, color change at base layer, and STL print files available. Color change at the top of the base clover print profile…
Cosmic wizard themed gnome. Print one to bring a little magic to your mantle, or print him small and use him as a mini for your D&D wizard! Files available: Original STL 1 Color print 2 Color Print
Single color and 2 color with change at ears available. Gyroid infill No supports needed at this size.
Cute Kitty themed key chain with space on the back to add text.
Color change is at a set at layer 23 so there is only 1 color change. May need to add a pause if you don't have a way to change filament automatically. Color 1 is the large flower base. Color 2 is the small flowers and gnome.
Standing frame to hold Instax mini photograph with cute hearts and stars.
Cute girl gnome with heart theme. Prints at this scale with no supports.
This Gnome looks great lounging arount the house or on your desk! He has 2 print files: 2 color print the the hearts on the legs a second color. 1 color print. We didn't need any supports, but other printers might especially if increasing…
So we took a gnome and some gold coins… stirred them up in a pot and BOOM we ended up with this guy! The Leprignome!!! He has gold coins for a beard and he also likes raves… You can never have too much gold!!! Printed for us at this scale…
Adorable gnome shaped keychain. keychain is set up to be colored by layer. Either with and AMS or if you insert pauses.
Originally designed for silk PLA with the settings below. Regular PLA print profile also attached. Arachne walls Gyroid infill Initial Layer Speeds Initial layer 40mm/s Initial layer infill 80mm/s Other Layer Speeds Outer wall 40mm/s…
Cute little flexi legged baby chick for Easter. For us it prints with no supports at this scale. A brim may be needed if scaling up a lot.
Boy bunny themed gnome for spring/Easter. Prints with no supports at this scale.
Our baby chick with flexi legs & bunny ears.
A set of nesting key chains featuring our Easter Bunny and an Easter Egg. Generic 3MF and original STLs available. For the Bunny depending on your slicing software you may need to add a “negative cylinder” to make the hole in the bunny's…
Girl and Boy versions of cutaway Easter Egg with bunny candy shapes inside. On our printer it prints with no supports when, but if changing the scale or layer height it may need some.
Cute cheeky “love” heart with flexi legs. Prints with no supports & a color change by layer on the back of the legs.
Daisy shaped keychain available in: Can be colored by layer allowing the text on the back to be in a different color. For us the pause/color change is 1mm up from the bottom.
Cute keychain/bag tag for St Patrick's day. Can be used for decoration or to fidget with. Makes a great zipper pull for your backpack! 3 color with changes based on layer. The following print profiles are available. Single color Generic…
Chocolate candy Easter bunny statue. Can't have chocolate bunnies around the house without eating them? …now you can! Because they are plastic and if you ate them it would be weird… *STL coming soon we're tweaking the file size *
Grip to aid in picking up and using interior keys. Key grip has flat sides on the thin edges so the key can sit upright on it's side to be easier to pickup. Key can also rest on top of door molding to keep it out of reach of little hands,…
Gnome with roses for a beard and a caterpillar body… why? Just because!
Where's Gnomo?… Oh No… That's Just Poop: Filament Search and Find Games You should never play with poop… unless it's filament poop!!! A seek and find game with a variety of ways to play, all using your printer's filament purge… its poop…
What happens when you mix a gnome with a trucker hat? …only this guy knows! Makes a perfect good luck charm for your favorite trucker's dash (super glue not included).
Flushie Jar After a surprising amount of requests we've added our jars here to Printables. Everyone needs jars that are not only functional, but also scalable jars AND ones that make great flush objects! If you do a lot of multi-color…
Easter candy themed flexi fidget. Fun to fiddle with and makes a great Easter gift.
Mysterious -corn Uploaded for all of those with discerning tastes.
Do you love 3D printing? Do you love filament? Then show your filament and printer some love by printing our Your Friendly Filament Clip: Hearts!!! Your printer deserves better than those boring old clips we've all been using!
Do you have a 3D printer? Do you like butterflies? I mean do you REALLY like butterflies? Then print some Your Friendly Filament Clip: Butterflies today! Who needs boring old filament clips when you can have Super Cute Butterfly ones!…
They may not be the fastest filament clips, but you can't outrun the cuteness of our Your Friendly Filament Clip: Turtle! You can print them in regular turtle colors or… Teenage Filament Ninja Turtle colors!!!
Tired of boring filament clips? Do you have to catch all of the filaments? Then you need a Your Friendly Filament Clip: Poke Ball! Print 1 or 1,000 for yourself today!!!
Do you need a little luck with your filaments? Do you need any excuse to print cute stuff? Then print some Your Friendly Filament Clip: Clovers today!!! Guaranteed to maybe be lucky!
Tired of boring filament clips? Need more cuteness in your printing life? If you answered yes to either, or none, of those questions print yourself some Your Friendly Filament Clip: Daisies today! It's like having daisies GROWING ON YOUR…
To wszystkie aktualnie dostępne wyniki.
