Liczymy pasujące modele…
The base mesh is done with the Snowflake Machine: http://www.thingiverse.com/thing:1159436 I optimized the mesh for printing with 0.35mm layer height and fast printig by keeping the ice plates only 2 layers height, this also adds too the…
Using a map-a-planet image I created this quite hi-res model. Used spray paint and fine mortar to "dust" it. Wikipedia https://en.wikipedia.org/wiki/Mare\_Moscoviense "Mare Moscoviense ("Sea of Moscow") is a lunar mare that sits in the…
I used the great work form Kubol https://www.thingiverse.com/thing:2086578 to make a tutorial for the german Make Magazin where I put a ESP32-Cam into it and use the face recognition to make actions (like opening a door or just light up…
Tired of geting dirt and water into your Crocs? I was, so I made some rivets to fill these holes for winter time. There are some variations in the holes, so use the Blender sourcefile to change the rivet. Then print as many as you need.…
Cookie Cutter Rabbit. The ones on the photo are not cookies but delicious cheesecake ("Quarkkuchen"). Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution: 0.4x0.2 Filament: Prusa PETG Jet Black…
Tensegrity structure. https://youtu.be/Lo\_Qxrsz824 Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Resolution: 0.4x0.2mm Filament: Prusa PETG Galaxy Black Category: Physics & Astronomy
I changed it a bit for better fit printed with my Original Prusa i3 mk2. Cleaned the STL a bit so further customisation (Blendfile!) should be easy. I made it a bit longer so that I could ease the printable but insane steep overhang. So…
The led illuminated sliders of the Behringer 2600 (ARP 2600 clone) don't look that good, are a bit too small and the LED light is not shaped well to indicate the position. SliderCaps2600-slider_Caps_akf_BM is the final design but you may…
Using this clamp you can mount the camera module on a ESP32-Cam board in two orientations. For 90° rotation carefully fold the flex-print cable as shown and put some foam below the camera module, then snap the clamp on. Print Settings…
I have fun playing with synthesizers, but at least the same fun is to build electronic and this is quite easy in this field. To integrate the things better I designed and printed some modules for my Behringer Crave synth. The Modules are…
Tired of making knots? I was, so I designed some fast to print hooks with a special twist: they hold up strong but are easy to use. You clip them on, then you tension the string by puting it into the little hook, this will ensure a strong…
Some knobs for 6mm D-shaped pots. You can print it and use a marker to paint the indicator line, print with a small inlay piece, print it in Multicolor, or use a small string of filament for the indicator. Use CA-glue to mount the parts.…
Green house rainwater gutter adapter/replacement for an old green house. The 2nd photo shows one original part on the left which was not totally cracked (I guess because not always in full sun) The old ABS(?) part was eroded over the…
I used this scan by The British Museum https://sketchfab.com/models/752e69d34933438d8230ac829d22300e # loaded it into Blender and use the texture to add some details by displacing the vertices. It may not be 100% accurate but adds detail…
I printed it in Prusa PETG. Depending on your printer scale it or use the .blend to change the modell.
Designed for 50mm fans, I use a 50x50x10mm Cooler Master EFB512LA, but I think it could be a bit stronger when using a filter. There is room for deeper fans! I printed in black PETG with a 0.4mm nozzle and 0.25mm layers. UPDATE : Added a…
I quite often accidentally touch the program knob on my Monologue, so either loosing my patch when not saved manually or just switching my program in a recording. So I made a smaller one. Included a normal one also. For a bigger filter…
I mount my DSLR whith this thingy on my NexStar SLT Alt/Az Goto mount. May fit also to other mounts. I put a support structure into the hole for the screw! Easy to remove with a cutter. EDIT: There is a bit sturdier version now, comes in…
My take on handles for lockpicks. Mine are from Sparrow, not sure if the geometry is somehow standartized. Blender buffs can modify the .blend. It is sized for a tight fit on my Bambu P1S printed in Redline PETG-Filament. Use the…
Replacements for B&D Workmates (old, Europe) Two sorts of claws, one needs a bit support on the round part and has the disadvantage that the clamping face is not sligthly tilted (as the originals are). I did not found it slipping on wood…
Just missed such thing, so I designed one. Needs a UNC 1/4" bolt with 10mm thread length, remove some threads at for best fit or get a special tripod one (quick release screw) from the interwebs. Print in this orientation! There is a…
Organize and store your patch cables. Works for 3.5mm TRS/TR and most USB cables and similar. I used PETG to print it.
This was made with Tinkercad. Edit it online https://www.tinkercad.com/things/drrW5Gw0F8B Print instructions Resolution: 0.15x4mm Filament: Innofill yellow and fillamentum galaxy grey PLA Notes: This is no multi color model! Color change…
Two solar filter foil (e.g. for Baader Astro Solar foil) holder. For a Maksutov 127mm refractor and the viewfiner (38mm). As you can see I marked the filters with a yellow tape, so you can easy see that they are still fitted to the…
Replacement for lost knob. Print instructions Category: Audio Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Supports: No Resolution: 0.15x0.4mm Infill: Octagone Filament: esun PETG black Post-Printing A tad white color to see it…
The slanted parts can fit some jumperwires into tight spaces, for me a case with some breadboards in it. I cleaned the original model a bit and while the blender models are not fully parametric you can still adjust the number of wire…
A magnetic cover that protects your Bastl Kastel2 Wave Bard or FX Wizard and holds the jumper wires during transport. 4x round magnets 4x4mm The backcover is also a part of my Rack for two Kastle2 Synths The Synthesizer:
I just bought a USB microphone (t.bone SC 440 by Thomann) and wondred why there is a thread on the end with the USB connector, and as USB B is notoriously wacky I thought "there must be a special lockable connector for this". The support…
Designed for 50mm fans, I use a 50x50x10mm Cooler Master EFB512LA, but I think it could be a bit stronger when using a filter. There is room for deeper fans! I printed in black PETG with a 0.4mm nozzle and 0.25mm layers. UPDATE : Added a…
I designed this as intemediate project for my bar-top arcade. However it turned out much more work than I expected. So I like to share for you to learn and remix. I used Blender for that, mostly because I am fluent with it and wanted to…
A case for an ESP32 with the meatloaf-firmware. Check out https://meatloaf.cc/ if you own a Commodore computer with IEC-ports. You can load programms from SD but also from the internet! Also the computer can access the internet (yes from…
Replacement for lost knob. Print instructions Licence: Creative Commons - Attribution Category: Audio Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Supports: No Resolution: 0.15x0.4mm Infill: Octagone Filament: esun PETG black…
Handle your SL1 platform with more ease and less resin on your gloves. Bit of a WIP! If you use it for scraping on the platform be sure to hold it correctly so it will not come off! The spring is just printed and will wear out most likely…
This is work in progress! The clearances are a bit tight for the TRS-plugs and also it only works with angleded connectors. I had to open the holes a bit. The parts are glued with some CA, I could not find a solution to use fasteners and…
The original parts are prone to breakage, esp. the PG ones.
To wszystkie aktualnie dostępne wyniki.
