Liczymy pasujące modele…
Loved this design, wanted it to make a Valve cover! Can be tight to get on the valve stem at first but keep it nice and straight and it goes on great! Printed this in Yellow PLA at 0.3mm with a little bit of variable layer height on the…
Needed a frame for an embroidery project my mom and I were working on. The inner frame was to finish it off and cover the fabric edges, should fit snug. We printed the inner frame and then spray painted it but could be printed in a…
Show all the love with these valve stem caps on your favorite ride! You will need to make sure you have them level with the top of the valve when first installing, it's a tight fit but will twist on nicely. If too tight size up a couple %
Layerd STL file for printing, once it's printed you'll need to bend it slightly to fit around your hair with the stick. Printed in PLA with 2 color changes at a 0.2mm layer height.
I created a years worth of fun hair accessories for something new each month. Many are big enough for a large bun but several are smaller for a small ½ bun or for use as a barrette instead of bun holder. All files should be printed at…
Set of 3 Christian Easter Egg ornaments for hanging on the wall or in your window to be reminded of the true miracle and reason for the season! I printed in PLA at 0.3mm, could do with some ironing on the top levels or flip them over so…
Loved the utensil holder design and wanted to make this so I didn't have to use mason jars anymore. There's a place for knives, forks and spoons! Thingiverse Model: https://www.thingiverse.com/thing:2191254 Printed in PLA on my MK3S+
I was asked to create a dia de los muertos earring so my daughter drew the skull design and I created the stl. Must be sliced at 0.15mm for the 7 layers to show up correctly. Used PLA and attached earring hooks to make the festive earrings!
Medium sized hair accessory meant for small amount of hair pulled back, could try scaling up to make a larger bun sized accessory but I haven't tried that. Layered STL file for printing, print a 0.2mm and set to change colors with each…
Thought it would be a fun challenge to make a heart shaped snake for valentine's day! Probably could use the new 2.6 slicer to add your own words on the blank snake. Can be printed in one color or multiple, I tested it scaled down to 60%…
Print this for custom drawer organization, you will need small screws to secure to the drawer sides. 3M strips may work to hold it in place as well. You will also need some ¼" wood cut to the custom sizes for your drawers. Printed at…
Created this pen/pencil holder to use in my kitchen to keep all the pens, pencils, sharpies and random small tools in an organized fashion. Used the multipoint rail with 3 locking bolts to hold it in place, it's solid and works great.
This screw goes in an outdoor junction box to keep the lid secure. Printed 0.15mm in PETG for strength and long lasting outdoors.
These make hanging lights in your Clam Quickset tent a snap! Clip them onto the poles for a quick easy hook to hang lights or other lightweight items from. I needed 6 for the poles in our Pavilion Quickset Clam. Print in PETG 0.3mm MK3s+…
Larger hair piece, it is fairly thin so wouldn't be able to put a lot of pressure on it but a small bun or medium amount of hair should be easily held in place. It has several layers so you can add some color!
Let others enjoy a little bit of nature in your hair with this colorful geometric flower and hummingbird hair accessory. Using the layers at 0.3mm you can print this with 5 different manual color changes starting at 0.8mm, 1.1mm, 1.4mm,…
First made this as a remix of a kitchen utensil holder, it was functional but not very sturdy. I remade the whole thing in Fusion, it's a little thicker and has some trim round the top to give it a little more structure. No Supports…
Wall or window Easter decoration ornament He is Risen! Printed on my MK3s PLA 0.3mm with a color change at the height of 2.30mm.
Medium sized hair accessory meant for a small amount of hair pulled back and secured with a stick. This will need some shaping to fit a good amount of hair, if you heat the stars up after printing and give them a gentle curve a better…
I wanted a quick 4th of July Hair accessory so I created this! It is a little thick so will need shaped while warm to fit nicely with the stick. Also meant for a smaller amount of hair so may not work well for a whole bun, if you want to…
The top of my son's fishing pole snapped, so we took the broken piece off and made an new piece for the top. Printed in PETG and heated it up a bit to “glue” it to the top of the pole. Has worked great ever since!
Quick small print for a Nativity Ornament. Printed with 0.2mm layers you can color the top 2 to make the stars different colors.
Medium sized hair accessory meant for small amount of hair pulled back, also included a Large sized hair accessory meant for over a bun. Layered STL file for printing, print a 0.2mm and set to change colors with each layer. Printed in PLA…
I wanted to make a holder for each of my family members and we only need one each. I also added initials to each one, this one is blank but easy to add an initial in tinkercad!
I wanted a way to hold my trash bags out of the way without using a bunch of filament and a faster print. This is also variable in size so if you have a wide roll or skinny roll out can place the left and right sides where they need to be…
Since this hotspot doesn't use external antenna's we needed a way to keep it up high and out of the way. This has two recessed holes for screws, could also be held to the wall with 3M strips or Nanotape. The side hole for USB access will…
We are celebrating Christmas in the Southwest Desert of Arizona surrounded by the beautiful Saguaro cactus, it seemed fitting to make that our tree this year and celebrate it with a cute ornament. Printed with a 0.4mm nozzle with 0.3mm…
In collaboration with @Nuvz we created a lightweight and thin ornament for sending in your holiday cards! Should fit a standard wallet size photo (2inx3in or 75mmX50mm), slide the corners into the slits and send away to your loved ones…
Had my daughter draw me a holiday palm tree we could make into an ornament. Printed in PLA with 6 color changes, must be printed at 0.2mm layer height. If you like these files post a make and send a cup of coffee by hitting the donate…
Della Mini Split Remote Holder, could work for other remotes as well. Added a 6.25mm positive multiboard push fit to the back to connect it to the multiboard grid. I inserted it at an angle so we do not need to remove the remote to use…
I wanted to label the water valves for our water system, these if printed with the text in a different color make it easy to read and see what valve goes to what part of the house. Included covers for Bathroom, Toilet, Shower, Kitchen and…
I needed a side mounted toilet paper holder with a shelf, most of them I could find were mounted on the back, so here you go if you need one that mounts on the side. If you need it to mount on the other side just mirror it and get to…
Needed a quick giveaway keychain for a hot air balloon event, fun and easy! Add your own text in the slicer or import into your favorite CAD software like Tinkercad and add it there. Should be printed at .2 layer height with a 0.4 nozzle.…
To wszystkie aktualnie dostępne wyniki.
