Liczymy pasujące modele…
Update: I added a mirrored version of all bottom corners, top corners, and the middle bottom hinge. This is my version of the IKEA Lack enclosure. It is higher to put a plate of foam and concrete plate/ stone plate under the printer to…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to monitor temperature and humidity of my enclosure from outside and inside. So I created this mount that fits right over the two front screws of the Y-belt-idler. It holds on to the frame with 4 round magnets ø10x3mm. The mount…
Wydruk około 1,37 €–1,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I recommend to print the vase with 0,1mm layer height to minimize holes that are generated during the sclicing process
This is how I made it: https://www.instagram.com/reel/DB3rtkrAmC9/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== Using a saw for carving a pumkin can be much easier than using a knife. I designed an ergonomic handle for a t-shank…
No support needed Size of the holes to screw on the inner part: 4mm For cables up to 8mm Different versions with no or multiple cable outlets available
This is a standardized version of my LED diffuser I built for my enclosure using transparent PLA . It is 240mm long and has holes for M3 countersunk screws. It is for LED strips up to 10mm width. If you need another length just add a…
This model combines two awesome models to mount and adjust the Raspberry Pi HQ Camera. After printing the ball head piece you need to print also the following parts from the linked originals: Raspberry Pi HQ Camera Mount for the…
No support needed. There are two versions to mount several shelfes close next to each other. Use 3mm countersunk head screws for mounting.
With this mount you can attach a standard 3 outlet socket in a table or wall. You can use it for wood with a thickness of 8-25mm. You will find the right clamp size in the list below. They are each fixed with one M3 screw Dimensions of…
Total Dimensions Width: 200mm Depth: 176mm Height: 226mm No Support needed! Layer Height: 0,2mm To print the frog you need to add filament change in the slicer. Each color is one layer with a hight of 0,2mm. Start with the base color,…
To wszystkie aktualnie dostępne wyniki.
