17 modeli
Here I start dumping the 100+ STL of screw thread adapters that I've made for the Telecentric project Waiting for the famed OpenScad “universal adapter” Maybe I'll put them all here. Start with some M42: Camera mount thread M42x 1 adapter…
Revision 0.6 - RMS male better toleranced, Z axis up, add height and logo, added M25 This is a set of parfocal extenders and adapters for microscope objectives. 1) They have RMS thread, both male and female. It is also called "DIN"…
Microscopy accessory Dummy slide to handle specimens mounted on a Coverslip It is a dummy slide that holds the coverslip Two models, one with the coverslip flush, the other holding the coverslip in a rail. A few ready made .stl for…
This is a screw mount adapter for cameras It works with c- mount cameras. The objective is for the little M12 (s-mount)lenses; can be used standalone as C - M12 adapter. The extra flange allows to attach the assembly to a M42x1 tube. Yes…
Here the dust caps for microscope objective and nosepiece. They have RMS /DIN thread, 0,800 Inch 36 tpi. The fit is very loose, to allow low-quality prints to work. Yes yes I'm studying OpenSCAD... but for now, .stl only Print Settings…
Micrometer stand NEW 24 Aug 2023 Published new model with some improvements - Better and faster print https://www.printables.com/model/562157-micrometer-stand derivative of the nice design of Wehrenseb Changes: wider base so it doesn't…
Revision 0.3! This is an adapter to use M12 lenses (S-mount, board lenses) as RMS microscope objectives. It is composed of 4 parts (plus the lens) that screw together. The lens is mounted inverted; M12 lenses between 8 and 16 mm make…
Micrometer stand monoblock, 0.3 Print it from the side! It has a flat side for that purpose. Sturdy, stable, minimal material. Loose derivative of the nice design of Wehrenseb It is a single piece + the knob Prints without supports from…
Here are the .stl for microscope caps. One is for the nosepiece, the other for the objectives. They fit RMS thread, 0,800 inch, 36 TPI. The tread is designed quite loose, it should work with PLA or other plastics. Print Settings Rafts: No…
The adapters I've made since the original photo port adapter was lost. For old Leitz microscope, mine is SM with 170mm system; maybe works also for 160. The trinocular head has cylindrical fitting, 38mm diameter. One model (the tall one)…
just another soft jaws design fits 140mm jaws, like our "Matador" brand There is place for two small magnets diameter 5mm height 3mm, to keep the jaws attached to the vice. Edit 5 december 2023 Added model with side clips, so doesn't need…
Edit 22 Nov 2021 re designed, to fit 23.2mm eyepieces and tube length 160mm new -stl is: Eyepiece_adapter_swift_23-2mm_160_M42_1 Adapter ring for mounting a camera on the Swift polarizing microscope. It substitutes the eyepiece holder; it…
This is an adapter to attach M12 lenses (Board lenses/ S-mount) in front of a camera objective, to work as super-macro. It has a 52mm x 0.75 male thread, that screws into the filter thread of camera lenses. And a female M12 x 0.5 thread…
Funnel stop design for microscope objectives, fully customizable in OpenSCAD It offer many options to fit most objectives; can also generate other stops like Condenser darkfield stops, eyepiece field stop etc. The Funnel models are…
This is an adapter to cleanly attach a LED light to the Wild Heerbrugg M11 microscopes. It is made in two parts that screw into each other into the hole of the base. Two dabs of glue will do the job as well, but this is more elegant. The…
This is the design for eyepiece caps, to stop the aperture at the exit pupil Can be used on a compound microscope to get "stereo" effect, by putting the half- stop (or half-moon) It is customizable, to fit different eyepieces. If the…
Here is the design for the "stray light plug" for the Leitz 0.80 darkfield condenser. The design has been reverse-engineered from old Leitz catalog illustration and user measurements. The default values in the Openscad are those…
To wszystkie aktualnie dostępne wyniki.
