Liczymy pasujące modele…
Inspired by the PS5 Controller, this grip is super comfortable and fairly easy to take on and off. Print in a more flexible and fatigue resistant material such as PETG, Nylon, etc. as the top clip needs to flex to take on and off the…
Print with the flat part of the grip on the print bed with supports. I used a threshold angle of 10 degrees with snug supports! Feel free to get this directly from me here: https://dildesigns3d.etsy.com
This is a reference CAD model for the R36S. Use it to help make a case, or any other accessories for the R36S! Modifications: 2/20/2023 - Updated button positions and SD card slots
BUY THIS PRINTED DIRECTLY FROM MY ETSY HERE Super easy print - just print on the flat side down! Use 2 pieces of 1mm thick jewelry felt lining on the left and right insides of the case to make the device snug, plus another piece on the…
Print this with the top side of the clip down. I printed with supports with a 10% support angle threshold. You shouldn't need a brim depending on your plate, but I printed previous versions with a brim just to be sure! Feel free to get…
Keeps the R36S protected pretty well! Print with the screen side up, paint supports near the triggers and around the smaller button holes. Have some precision scissors ready to get rid of stringing! I printed this with Overture high speed…
Print with supports for the charging slot near the clip. Uses a piece of filament as the hinge, use a bit of superglue on both ends. Fix a felt strip to where the screen sits so the device will fit properly while in grip mode.
Print with the top of the device side on the print bed with a brim and skirt for extra plate adhesion. I printed this using PLA+, and lined the inside of the screen area with a felt lining to prevent any scratches to the screen.
Print in TPU with the smallest layer lines you can! More details TBA
Magnetic case for the TRIMUI Smart Pro You can print this without any overhangs or special settings! The real work is in the assembly. Use a piece of 1.75 mm filament as the hinge. Cut the filament at the end of the hinge and superglue or…
Remix of the mentioned model, but uses 50% of the filament and prints in a third of the time! Printed in PETG at .28mm layer heights with 2 wall loops and 20% gyroid infill. Print on the edge to have the best strength, I recommend to use…
Feel free to use this to develop your own accessories!
Reference model for the TRIMUI Smart Pro. Keep in mind that this does not include the shoulder buttons, but everything else is included and relatively accurate. Enjoy making accessories for the Smart Pro!
Print the face of the button down with supports, fan off and as small of a layer/nozzle size as you can. These print super quickly and work pretty well. You may need to snip off a bit of the stalk length or use a deburring tool to smooth…
TPU Cases for the Kobo Clara BW. There are 3 versions! A thinner case, a thicker case, and a thicker case with bumps on the corners. Personally, the thinner case is a bit too thin for me to be properly protective, and I find that the…
Print in TPU with supports nice and slow with the flat side down! I used a 10% support threshold. If you want to buy this from me or want to support me, follow this link here: https://dildesigns3d.etsy.com
Settings don't really matter, just print with DRY TPU to prevent stringing and use your printer's recommended TPU Settings (low volumetric flow rate). The only settings I changed were to use snug supports with a 25 overhang to ensure the…
I designed this since existing cases can't fit a MM+ with a sleeve, including the official MM+ case! Originally Printed using PLA+ Includes a charging port, a lip to lift up the case, and a nice little decal on the lid! Uses 6 6.5x1.58mm…
A (not so easy) print for a grip case for the Miyoo A30 This print requires exceptional bed adhesion. I use a BIQU CryoGrip plate at 50 degrees celsius. This may not print well on a standard PEI bed, and does not work well with bed…
Reference model for the RGB 30. It has a better side profile and properly placed ports compared to other models I have seen on the internet. Notes: Front buttons and rounded areas of the trigger buttons are incorrectly modeled, need to…
Mod that replaces the LED cover of the Miyoo A30 so you can attach a lanyard strap to the device. Is really strong, I haven't had any issues with mine! Use this teardown video and go to the point at which you remove the front off the…
Used to attach this mount to the whalen cabinet! I recommend to print this with the side facing the corner of the cabinet down with as high infill as possible so it can be a strong base for your phone mount. Initially printed with PLA+ on…
https://github.com/dillhicks/dilpad Case made for the dilpad, a hotswap mechanical macro/numpad based off the dumbpad. Includes 2 versions of the case, a case that has holes on the bottom for tilters, and one without, and a shroud/plate…
To wszystkie aktualnie dostępne wyniki.
