Liczymy pasujące modele…
Made a remix for UJ's Cosplay Calipers to make it a little easier to keep them in one place while measuring. Just print both pieces and replace the plug piece of Uncle Jessy's model. Both halves screw together and print easily. If you…
---A COIN BANK VERSION IS AWAITING APPROVAL--- Thank you for helping with the #LMShow 2023 Christmas Print Drive! This is a pirate ship barrel used for gunpowder for canons that you can use as a stash can. Print is fairly quick with no…
!!!!!!!!!!!THERE HAS BEEN AN UPDATED BODY BECAUSE THE PREVIOUS ONE WAS TOO SMALL! PLEASE ONLY PRINT THE ONE WITH (resized) IN THE NAME!!!!!!!!!!! Thank you for helping with the #LMShow 2023 Christmas Print Drive! This is a pirate ship…
A keycap based on the minecraft redstone block for cherry mx switches. Print the clear part in clear and the gray part in gray and glue together. Works great if you have a red keyboard like me or turn your rbg for that key to red.
I wanted to learn to low poly models so I decided to make a low poly version of a common Pikachu model redesigned to not need any support as well when printing.
I wanted to learn to low poly models so I decided to make a low poly version of a common Pikachu model redesigned to not need any support as well when printing. Enjoy!
Here is a filament rack i designed myself. You can see it in the picture and has been working well for over 2 years now. My recommendation is to print a bottom, then a short 2 or so inch conduit to the first middle rack that will actually…
Made this set of dice for Loyal Moses of the Loyal Moses show for his bigger than life D&D game. Hope I get in 😁 The dice should be able to be printed without support (hopefully) and on an Ender 3 size printer (235mm x 225mm) at the…
---COIN BANK VERSION NOW AVAILABLE--- Uses same base Thank you for helping with the #LMShow 2023 Christmas Print Drive! This is a soda bottle of pirate grog (Lemon lime to keep away that scurvy) that you can use as a stash can. Print is…
Thank you for helping with the #LMShow 2023 Christmas Print Drive! This is a basic treasure chest you would find on a pirate ship containing pirate Treasure. It prints with no support if you have half decent cooling. FILAMENT They want…
A model you can use to show your printer in prusaslicer instead of just a boring flat bed. Just follow these steps: 1. 2. 3. 4. Select the file and you're good to go!
---COIN BANK VERSION NOW AVAILABLE--- Uses same base Thank you for helping with the #LMShow 2023 Christmas Print Drive! This is a soda bottle of pirate grog (Lemon lime to keep away that scurvy) that you can use as a stash can. Print is…
Spaceship fuel....alien and astronaut drink...something. Made for #LMShow Print Drive 2022 but late No support is needed for the lid thanks to the 45 degree lip between the threads and the top. Threads are 90 degrees, rounded, and thicc…
Added extra width to get it another few mm to the bed so it can clean more in one swipe. Also added 2.5mm and 3mm holes for more options for locking it down. Will need support if printed in this orientation easily done with paint on with…
“I'm Different!” Thank you for helping with the #LMShow 2023 Christmas Print Drive! This is a basic crate block you would find on a pirate ship. It has simple images on all sides and even the bottom and prints with no support if you have…
---COIN BANK VERSION NOW AVAILABLE--- Uses same base Thank you for helping with the #LMShow 2023 Christmas Print Drive! This is a soda bottle of pirate grog (Lemon lime to keep away that scurvy) that you can use as a stash can. Print is…
Just my version of the original Universal Auto-Rewind Spool Holder stand but with extra area that holds mounting holes so you can put it...wherever. The other multi part mountable stands just were too flimsy for my liking so I had to do…
Someone in the original posts comments mentioned how the center black part would fall out so I remixed it to have a center. Uses more filament, yeah, but I personally like it this way better. Printed at 100% scale the center holder pops…
“Bring me JoelBot's Head” -Some evil robot probably Decided to make another calibration cube. This time for the 3D Printing Nerd. Kept 2 axis markers on it with the Y and Z that way you can give the calibration cube a high five on the X…
Thank you for helping with the #LMShow 2023 Christmas Print Drive! Need to identify your fellow pirate? Just whip out your POE ID. Your Pirate Oceanic Explorer Identification! No support needed, obviously. FILAMENT They want everyone who…
Joke made by a buddy who asked me to make it so I did. Don't get mad at me all I didn't know the rivalry till after made. Do a m600 or similar color change after the base that should be silver. If you open the project instead of import it…
Had a friend ask me to make a Bear version of the phone stand this was remixed from so here it is. I hope its good and looks well since I have yet to play tarkov but wanted people to be able to enjoy this. If you don't mind click here to…
Had a friend ask me to make a USEC version of the phone stand this was remixed from so here it is. I hope its good and looks well since I have yet to play tarkov but wanted people to be able to enjoy this. If you don't mind click here to…
A simple glue stick holder for your lack enclosure. Made so the holes are on the inside and don't use up excess space. Able to use the same larger screws you used to make your enclosure.
Nozzles should fit snug but not tight. Print the Base file you need and an accompanying lid and you're good to go.
A small wall art made of the buttons from the original NES controller. Easy to print and attach to the wall using something like loctite funtak to not damage the wall/door.
A quick set of dice I whipped up for good ol Joel Telling. Sadly because of the detail of the Joelbot's handsome face I was unable to bevel it for single color but as dual color it should work no support…I hope.
Hey there all. Wanted to show some love but this time for LDO Motors, the best voron kit and part makes out there. I thought LDO could be made to look like the A&W Rootbeer can logo so I did and here we are. I really hope I did my…
FOR THE HORDE! I wasn't able to find any good World Of Warcraft extruder knobs for my printer so I decided to make one of my own. I made this for my Ender 3 and it seems to fit pretty snugly. I combined THIS EXTRUDER with THIS HORDE…
Remixed the original into a Hans Gruber version when requested at the LMShow live stream. Skin tone - Start of print Black - Layer 14 (2.8mm) White - Layer 16 (3.2mm) Red - Layer 23 (4.6mm)
The 3 main spools should print great with no support as long as you have good cooling. Just use one of each M and F types. The Hex Pattern ones uses the same 7x1mm hex pattern in the bambu spool meaning you SHOULD be able to use these For…
A remix of a model I found to work a lot better. Works with cheap rubber sheets and contains a small purge bucket Uses m3 screws and nuts and has both a shorter version for standard length nozzles and a rapido version for longer volcano…
Wanted to make this for people to have a little extra luck with giveaways at the #LMShow. Print it at any size and gently screw in the lid as the giveaway is happening and you'll have a little extra luck. Just you see! NO SUPPORTS SHOULD…
Everyone knows flame decals make your car go faster. Imagine what it will do for a buggy. Just a small 3 piece set of flame decals to make your E3D buggy at least LOOK faster. PETG is recommended but PLA worked for me with the silk gold…
A simple hairspray can holder for your lack enclosure. Made so the holes are on the inside and don't use up excess space. Should also work with the larger screws you used to assemble your lack enclosure.
Made a D20 better than the last for the Loyal Moses Dungeons and Dragons Campaign he's gonna start. Fixed the previous one with a font I believe LM preferred and chamfered/beveled the numbers/letters to make it more printable at a large…
FOR THE ALLIANCE! I wasn't able to find any good World Of Warcraft extruder knobs for my printer so I decided to make one of my own. I made this for my Ender 3 and it seems to fit pretty snugly. I combined THIS EXTRUDER with THIS ALLIANCE…
Designed a cute Pusheen filament swatch for displaying filament on etsy. I wanted something cute to show it off and no other swatched really fit the bill so I went ahead and remixed one to make this. No need to credit on etsy, just use!…
After watching Kyle Hill's video I decided The Facility might find some STLs for the warning signs mentioned there in case they don't have them yet. Twitter for general nerdy and 3d printing stuff. Twitch for games Print Settings Printer…
Made this as a joke because I couldn't get the idea out of my head. Sorry it took to long to make manifold. Its a mashup of the printer name the WXR and the car name the WRX. Hope you all enjoy!
After having a long print failure i thought it was time to finally get a runout switch. I didnt find anything I really liked that worked with the limit switched I had. -Assembly- Just print both halves as oriented in the files (support…
Here now everyone can just be quiet about the whole thing right.....right?
Realized the head of ModBot (the robot not the human) would make a perfect calibration cube with a little modification Went ahead and modeled it from scratch making the ear cups(?) concave instead of convex so you can measure without…
A button for you to push (or call from a START_PRINT macro that plays a text to speech Magic 8 Ball. Included both single and multicolor models in case you're lucky enough to have a FYSETC ERCF kit. To get the macro to work you need the…
“Bring me JoelBot's Head” -Some evil robot probably Decided to make another calibration cube. This time for The LM Show. Kept 2 axis markers on it with the X and Y and I guess you can consider the Nos N a Z if you look at it the right way…
The world could always use more heroes... Decided to make another extruder knob. This time for another one of my favorite blizzard games, overwatch. The symbol is lifted enough to make changing filament for the 3 colors easy. Tested to…
Had done a remix of the tile back when this released and printed mine with a stand so it could watch over the print room
To wszystkie aktualnie dostępne wyniki.
