P
Printablessensitivewoo
Bed cleaning tool
Printed PLA, 220c 80 mm a sec, slower at the nibs at the top, 3 walls, infill 15% lines.
- Pobrania
- 1766
- Polubienia
- 859
- Ocena
- 4,87
Wszystkie modele
62 modeli
P
Printablessensitivewoo
Phat Bic Lighter Sleeve
.4 nozzle .2 layer height 6 layers top and bottom and 6 walls inside and out 30% infill, cubic, there is not much infill no supports I used super strong hairspray for good bed adherence.
- Pobrania
- 488
- Polubienia
- 99
- Ocena
- 5
P
Printablessensitivewoo
Taco Shell Holder
Top, bottom and walls 4, 30% infill.
- Pobrania
- 270
- Polubienia
- 82
- Ocena
- 0
P
Printablessensitivewoo
Creality dryer box bushing
This bushing prevents the bowdentube from being pulled into the dryer box when filament is being pulled by the extruder. Printed in TPU.
- Pobrania
- 194
- Polubienia
- 27
- Ocena
- 4,67
P
Printablessensitivewoo
Putty Knife
Just wanted a easy and simple print for a disposable putty knife. Printer settings I used .4 nozzle 6 top and bottom layers, top concentric pattern and bottom concentric pattern 7 walls 25% infill cubic
- Pobrania
- 152
- Polubienia
- 11
- Ocena
- 5
P
Printablessensitivewoo
Wolf Coaster
6 walls, 6 top and bottom .2 layer height .4 nozzle 30% infill with triangles top fill pattern Monotonic Lines bottom fill pattern Concentric
- Pobrania
- 151
- Polubienia
- 25
- Ocena
- 5
P
Printablessensitivewoo
Soda Can Lid TPU
Simple sleek and easy to print. .2 layer height .4 nozzle I printed solid by upping the walls to 9 and top and bottom concentric layers to 6.
- Pobrania
- 104
- Polubienia
- 19
- Ocena
- 5
P
Printablessensitivewoo
Drill Dust Collector
Just thought I would take a try at a different design of a simple tool. This tool will catch the debris when you drill on a vertical surface.
- Pobrania
- 94
- Polubienia
- 17
- Ocena
- 0
P
Printablessensitivewoo
Kobra 2 Max screen cover remix
Great addition to my Kobra 2 Max. .2 layer height .4 nozzle no supports, just turn the layer speed up with lines
- Pobrania
- 86
- Polubienia
- 11
- Ocena
- 0
P
Printablessensitivewoo
Gargoyle Shot glass remix
Just made the interior of the glass cylindrical and smooth.
- Pobrania
- 84
- Polubienia
- 13
- Ocena
- 0
P
Printablessensitivewoo
Wire mount remix
Just resized about 250 % and added a dowel in the cap to hold and secure my TV wires.
- Pobrania
- 78
- Polubienia
- 15
- Ocena
- 0
P
Printablessensitivewoo
Garden Hose Washer
The washers dimensions are 25mm OD x 16 mm ID x 3mm thick I printed with TPU .2 mm layer height .4 nozzle solid by upping the line count
- Pobrania
- 73
- Polubienia
- 23
- Ocena
- 5
P
Printablessensitivewoo
Knob Driver
Small ¼ bit driver with 10x3 mm magnet inserted in the print. I made two versions, one solid and the other one with a TPU grip.
- Pobrania
- 71
- Polubienia
- 19
- Ocena
- 5
P
Printablessensitivewoo
Gnome flattened bottom
tips : Used 3DHOJOR Tri Color filiment, 220c, 80 mms and 40 mms outer walls, 3 walls, 15% infill lines pattern, no supports. Turned out great.
- Pobrania
- 67
- Polubienia
- 25
- Ocena
- 0
P
Printablessensitivewoo
Zippo Presenter Remix Gridfinity
Gridfinity Zippo lighter display and storage. .2 layer .4 nozzle 4 walls, top and bottom 30% infill triangles changed color right when Zippo started printing.
- Pobrania
- 54
- Polubienia
- 11
- Ocena
- 0
P
Printablessensitivewoo
USB & Micro SD card Gridfinity holder
Just another Gridfinity holder for USB drives and microsd cards.
- Pobrania
- 50
- Polubienia
- 6
- Ocena
- 5
P
Printablessensitivewoo
Egyptian Cat remix
printed with fuzzy skin .2mm skin thickness .4mm skin point distance layer height .2mm .4mm nozzle 30% infill cubic
- Pobrania
- 49
- Polubienia
- 9
- Ocena
- 0
P
Printablessensitivewoo
3D PRINTING ROOM SIGN
6 walls 5 top and bottom layers monotonic lines 30% infill cubic these setting worked for me you can set as desired
- Pobrania
- 48
- Polubienia
- 10
- Ocena
- 5
P
Printablessensitivewoo
Funnel 28 MM short spout
I made this funnel to fit my motorcycle, ZX14R, not hitting the clutch basket and with a bigger opening. I have used many variations using PLA and they work great. I used 3DHOJOR Filement, 210c, 6 lines w and top and bottom layers so it…
- Pobrania
- 47
- Polubienia
- 9
- Ocena
- 5
P
Printablessensitivewoo
Metric Tap Bin Gridfinity
I needed storage for my 9 piece metric bit set. .2 layer height .4 nozzle 30% infill triangle 6 top and bottom layers 7 walls
- Pobrania
- 46
- Polubienia
- 6
- Ocena
- 0
P
Printablessensitivewoo
Gridfinity scraper and blade holder
Did not take away from the original design, just patched it.
- Pobrania
- 45
- Polubienia
- 17
- Ocena
- 5
P
Printablessensitivewoo
Round cup
Printed in PLA, holds water, and TPU, weeps a little. .4 nozzle .2 layer height and printed solid upping the wall and top and bottom line count.
- Pobrania
- 45
- Polubienia
- 9
- Ocena
- 0
P
Printablessensitivewoo
Beefy Scraper Remix
Printed PLA, 60 mms, 6 walls, 6 top and bottom, printed with Beefy name down.
- Pobrania
- 43
- Polubienia
- 8
- Ocena
- 5
P
Printablessensitivewoo
Anycubic Spool Holder, short version, with bearings
Works really good, almost too good. tree supports on the main spool shaft, used PLA .2 layer height .4 nozzle 5 top, bottom, concentric, 5 walls 30% infill gyroid need 2 608 skateboard bearings
- Pobrania
- 38
- Polubienia
- 1
- Ocena
- 0
P
Printablessensitivewoo
Gridfinity 1x1 razor blade holder
just wanted a simple blade holder for my organization printed in petg .2 layer height .4 nozzle 30 % infill cubic 5 walls, 5 top and bottom layers
- Pobrania
- 38
- Polubienia
- 4
- Ocena
- 5
P
Printablessensitivewoo
5FDP Brass Nuckle Art remix
Tweaked the size, added a couple magnet holes and resized them. took off the texture and added a quote from the band. I included a blank text model so you can add you favorite band quote. Magnets are 10 X 3mm qty 5 .2 layer height .4…
- Pobrania
- 37
- Polubienia
- 7
- Ocena
- 0
P
Printablessensitivewoo
head phone holder
Made a head phone holder, one with Bose logo and one blank. Included a keyhole test piece and a hole template for the wall.
- Pobrania
- 35
- Polubienia
- 7
- Ocena
- 0
P
Printablessensitivewoo
Kawasaki Emblem Key Chain
was made with PLA and TPU 3 walls 3 top and bottom layers monotonic lines 30 % infill cubic .2 layerheight .4 nozzle
- Pobrania
- 34
- Polubienia
- 3
- Ocena
- 0
P
Printablessensitivewoo
Milwaukee sign remix
These colors really pop, you can always reverse the colors. .2 layer height .4 nozzle 4 walls 5 top and bottom layers, monotonic lines 30 % infill cubic
- Pobrania
- 34
- Polubienia
- 14
- Ocena
- 0
P
Printablessensitivewoo
BIT HOLDER MAGNETIZED
.2 layer height .4 nozzle 30 % infill cubic 5 top and bottom layers2 layer height .4 nozzle 30 % infill cubic 5 top and bottom layers 4 walls 3x10 magnet, lather up with glue stick when inserting 4 walls 3x10 magnet, lather up with glue…
- Pobrania
- 33
- Polubienia
- 9
- Ocena
- 0
P
Printablessensitivewoo
Phoenix Remix Coaster
Phoenix Coaster .2 layer height .4 nozzle 4 layers, top, bottom and walls 30% infill I changed color right when the Phoenix design starts.
- Pobrania
- 32
- Polubienia
- 5
- Ocena
- 0
P
Printablessensitivewoo
Post-it Caddy
Easy print, select your walls, infill, top and bottom and go. I did silk PLA at 220 c, 3 walls, 25% infill, 3 top and bottom layers.
- Pobrania
- 30
- Polubienia
- 4
- Ocena
- 0
P
Printablessensitivewoo
Gridfinity Volcano Nozzle Case
Created a small Gridfinity nozzle case with a snap lid.
- Pobrania
- 30
- Polubienia
- 6
- Ocena
- 5
P
Printablessensitivewoo
Gridfinity 1 x 1 nozzle box remix
Just needed a taller nozzle box and wanted to make a lid for it. Standard settings on my printer for silk pla and used standard supports on the lid.
- Pobrania
- 30
- Polubienia
- 7
- Ocena
- 0
P
Printablessensitivewoo
Aprilia Coaster remix
I found best slicer settings are .4 nozzle .2 layer height 30 % infill 4 walls and top and bottom layers, line pattern
- Pobrania
- 30
- Polubienia
- 1
- Ocena
- 0
P
Printablessensitivewoo
Tri Towel Holder
Just joined three together. Printed with cc3d silk white filament. .2 height .4 width 330c 6 wall lines which makes it almost solid until the top of the print 25% infill.
- Pobrania
- 29
- Polubienia
- 9
- Ocena
- 0
P
Printablessensitivewoo
Clip remix 45 tab
Just added a 45 to the tab on the classic clip
- Pobrania
- 29
- Polubienia
- 5
- Ocena
- 5
P
Printablessensitivewoo
Nibbed Texture Tile
Main purpose of this design was to create the texture. This could be used on the surface of other models, like boxes. Tile could be used as a non slip surface as well. I used standard pla settings and it worked well.
- Pobrania
- 28
- Polubienia
- 8
- Ocena
- 0
P
Printablessensitivewoo
Elephant remix
printed with fuzzy skin .2mm skin thickness .4mm skin point distance layer height .2mm .4mm nozzle 30% infill cubic organic supports
- Pobrania
- 27
- Polubienia
- 3
- Ocena
- 0
P
Printablessensitivewoo
Scifi Gridfinity 1x2 Box Short
I remixed this model. Just made the main body shorter.
- Pobrania
- 27
- Polubienia
- 6
- Ocena
- 0
P
Printablessensitivewoo
Decorative Fish Remix
If you drag stl into slicer resize 20%
- Pobrania
- 27
- Polubienia
- 5
- Ocena
- 0
P
Printablessensitivewoo
Gridfinity Hobby Knife Holder
I had four knives and blades that were just thrown in a drawer. Gridfinity to the rescue. 2X5X6 gridfinity size
- Pobrania
- 26
- Polubienia
- 11
- Ocena
- 5
P
Printablessensitivewoo
Pumpkiin remix
just printed in default pla settings and no supports.
- Pobrania
- 24
- Polubienia
- 10
- Ocena
- 5
P
Printablessensitivewoo
Paper Cutter tube case
Just wanted to store this tool in a safe place. There is an exposed blade.
- Pobrania
- 23
- Polubienia
- 6
- Ocena
- 0
P
Printablessensitivewoo
Flower Pot and Saucer
This model is scalable. I printed it with a standard pla profile except top and bottom layers are concentric, no supports.
- Pobrania
- 21
- Polubienia
- 1
- Ocena
- 0
P
Printablessensitivewoo
Happy Easter Coffee Stencil
I used 5 walls, top, and bottoms top and bottom layers monotonic lines infill 30% infill cubic
- Pobrania
- 21
- Polubienia
- 2
- Ocena
- 5
P
Printablessensitivewoo
Ryobi Wall Sign
What a way to display your most economical tool pride.
- Pobrania
- 20
- Polubienia
- 5
- Ocena
- 0
P
Printablessensitivewoo
KTM Coaster remix
I printed in TPU but PLA should be good as well. Changed colors at certain layers and you can use your slicer to determine where.
- Pobrania
- 20
- Polubienia
- 8
- Ocena
- 0
P
Printablessensitivewoo
Screw on funnel for silica gridfinity box
Simple screw on funnel. Printed silk filament at 225c with 6 walls to make it solid.
- Pobrania
- 19
- Polubienia
- 8
- Ocena
- 0
P
Printablessensitivewoo
Gridfinity Single Bottle
Great little bottle. Needed a short version to fit in a shallow drawer.
- Pobrania
- 19
- Polubienia
- 4
- Ocena
- 5
P
Printablessensitivewoo
GRIDFINITY MAGNETIZER TRAY 2X2
.2 layer height .4 nozzle 30% infill cubic pause print right before the magnet cavities get covered and use glue stick, top and bottom. need 4 qty 5x25 magnets
- Pobrania
- 19
- Polubienia
- 2
- Ocena
- 0
P
Printablessensitivewoo
Superman Bag Clip remix
Superman! I used silk filament. .2 layer height .4 nozzle 6 walls and top and bottom layers concentric
- Pobrania
- 15
- Polubienia
- 3
- Ocena
- 0
P
Printablessensitivewoo
Curved Magnetic Bowles
PLA works great for these bowls. Used a iron to press the magnets in with a dab of gorilla glue. Use them for organizing parts when I'm taking something apart or assembling something new. Love the magnets to store on the side of the…
- Pobrania
- 15
- Polubienia
- 3
- Ocena
- 0
P
Printablessensitivewoo
BOO
created a double sided tea light holder with a press fit for the letters. I used glow in the dark Overture filament. .4 nozzle, .2 layer height, 40 % infill, 3 walls, 5 bottom & 3 top layers.
- Pobrania
- 13
- Polubienia
- 6
- Ocena
- 0
P
Printablessensitivewoo
Don't piss off Superman Logger Benchy
Printed in standard PLA settings and slowed way down, about 50 mms.
- Pobrania
- 11
- Polubienia
- 6
- Ocena
- 0
P
Printablessensitivewoo
Thermo-Hygrometer Fridge Magnet Base
Print face down need 4 qty 10x3 magnets 4 top layers, monotonic lines, insert magnets 4 layers from the top, which is the legs since it is printing upside down, and smear glue stick on and around the sides of the cavity after inserting…
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
Printablessensitivewoo
Tweezer holder remix
Great model origanally, just filled the holes that went through to the magnet cavity
- Pobrania
- 10
- Polubienia
- 4
- Ocena
- 0
P
Printablessensitivewoo
Thermo-Hygrometer Desk Base
Just wanted a easy print for my hydrometer, 42mm hole printed solid just upping the walls, used silk PLA .2 layer height .4 nozzle no supports
- Pobrania
- 9
- Polubienia
- 3
- Ocena
- 5
P
Printablessensitivewoo
WOO Filiament Clip
Simple and useful spool filament clip. I printed solid with 4 walls, silk PLA 225c.
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
Printablessensitivewoo
THERMO-HYGROMETER MAGNET BASE
Print face down need 4 qty 10x3 magnets, I used glue stick on top and bottom when inserting them in the model 5 top and bottom layers, concentric 5 walls .2 layer height .4 nozzle 30% infill gyroid
- Pobrania
- 8
- Polubienia
- 5
- Ocena
- 0
P
Printablessensitivewoo
The Horse in the Rott
My dog is a horse. I printed with these settings perimeters, top, and bottom layers 5 30 % infill cubic .2 layer height .4 nozzle
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
Printablessensitivewoo
Lab series Gridfinity
Started off as a easy access small project parts tray and one of my dogs said wait a minute. I printed with PLA Silk at 235c .4 nozzle .2 layer height 3 top, bottom and perimiter layers 20 % infill cubic supports organic 17 overhang…
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.