P
PrintablesDomesticHacks
IKEA Skadis Hook Improved (SKÅDIS)
Simple hook for the IKEA SKÅDIS pegboard. Improved design avoids being pulled out accidentally.
- Pobrania
- 1588
- Polubienia
- 259
- Ocena
- 4,81
Wszystkie modele
Liczymy pasujące modele…
P
PrintablesDomesticHacks
Cat Deterrent
Modular mat to keep your cats away from certain places. You can glue the parts together or just snap them into eachother.
- Pobrania
- 1046
- Polubienia
- 127
- Ocena
- 4,67
P
PrintablesDomesticHacks
Linear Snuff Accelerator v3 - Snuff Box - Schnupftabakschleuder
Snuff box with build in catapult. New Version with a dent, for a more easy lever movement (only visible on the renderings, not the real photos). I prited it in PLA with a 0.35mm nozzle, 0.20mm layer height and a honeycomb infill of 0,20.…
- Pobrania
- 946
- Polubienia
- 70
- Ocena
- 4,33
P
PrintablesDomesticHacks
![GEPRC Mark4 Clone Frame Parts [WIP]](https://media.printables.com/media/prints/98925/images/1000844_bc4bd012-487e-4951-9d7a-7ab5d18e3c8e/featured_preview_quad.jpg)
GEPRC Mark4 Clone Frame Parts [WIP]
Parts for my 5 Inch quadrocopter build. The parts are for a clone of the GEPRC Mark4 frame: https://www.banggood.com/custlink/KvvEZ5HHEp Some of the parts should fit to the original frame, too but at least the front bumper won't fit…
- Pobrania
- 937
- Polubienia
- 54
- Ocena
- 5
P
PrintablesDomesticHacks
Under Desk Headset Hanger
Simple hanger to hang your headset under your desk.
- Pobrania
- 344
- Polubienia
- 52
- Ocena
- 4,67
P
PrintablesDomesticHacks
Behringer UMC202HD USB Interface Desk Mount
Mount for the Behringer UMC202HD USB audio interface (maybe works for other models, too). The front plates are hold in place by M4 melting inset nuts. Printed in Devil Design PETG on a Prusa Mini clone.
- Pobrania
- 244
- Polubienia
- 40
- Ocena
- 4
P
PrintablesDomesticHacks
Mockup LOLIN32 Lite ESP32 USB-C Board (clone)
Mockup model for a clone of the LOLIN32 Lite ESP32 USB-C Board. The one I got the measurements from: https://s.click.aliexpress.com/e/_DnaBij3
- Pobrania
- 239
- Polubienia
- 10
- Ocena
- 0
P
PrintablesDomesticHacks
16mm Grow Tent mount for 5W clip fan from Garden Highpro GHP
Since the original mount of the Garden Highpro 5W clip fan isn't really suitable for (especially smaller) grow tents, I designed an alternative one. It can be mounted to a pole of the tent with two zip ties. I additionally put a strip of…
- Pobrania
- 238
- Polubienia
- 35
- Ocena
- 5
P
PrintablesDomesticHacks
LCR-T4 Part Tester Case (MTester)
In addition to the printed parts, you will need: 4x M3 Screws 4x M3 nuts 2x Small magnet (8x3mm) You may also need some tape to make the tester board a little bit thicker since depending on your printer, the board fit could be a little…
- Pobrania
- 202
- Polubienia
- 20
- Ocena
- 5
P
PrintablesDomesticHacks
Double life (or anything) counter for table-top games (angeled or adjusted for visibility)
Allows to join two life counters together. Check the original model this remix is based on for more information, this one contains only the different files. Files to print (original, angeled version): Life_Counter_V1.00-middlepart.stl…
- Pobrania
- 125
- Polubienia
- 30
- Ocena
- 5
P
PrintablesDomesticHacks
Game Boy Card Holder
Holder for up to 10 Game Boy cards. I prited it in PLA with a 0.5mm nozzle, 0.3mm layer height and a honeycomb infill of 0,15.
- Pobrania
- 122
- Polubienia
- 29
- Ocena
- 4,5
P
PrintablesDomesticHacks
Game Boy Cartridge Shell
My take on a Game Boy cartridge shell.
- Pobrania
- 116
- Polubienia
- 32
- Ocena
- 5
P
PrintablesDomesticHacks
Swimming Pool Hand Rail Clips - Replacement Parts Modeled after a Existing One
Replacement clips for a hand rail of a steel wall swimming pool. There are two variations: The original one recreated (the blue one in the pictures). One with a little hook to hold for example a thermomenter. Instructions I printed it in…
- Pobrania
- 85
- Polubienia
- 13
- Ocena
- 0
P
PrintablesDomesticHacks
Dry Herb Vaporizer Funnel with Stomper (for Yocan Hit)
Just a simple funnel for a dry herb vaporizer with a build in stomper. It's designed fot the Yocan Hit but maybe it will fit others, too.
- Pobrania
- 81
- Polubienia
- 6
- Ocena
- 0
P
PrintablesDomesticHacks
Kingston HyperX Cloud II Remote Under Desk Mount
Under desk mount for the USB audio adapter of the Kingston HyperX Cloud II headset.
- Pobrania
- 81
- Polubienia
- 10
- Ocena
- 5
P
PrintablesDomesticHacks
Sapphire Pro Z-Axis Endstop Mount
Replacement mount for the Z-Axis endstop swith of the Two Trees Sapphire Pro 3D Printer.
- Pobrania
- 80
- Polubienia
- 9
- Ocena
- 5
P
PrintablesDomesticHacks
Steering Stem Nut Socket, Yamaha XV535
I needed a socket to tighten the steering stem nut of my Yamaha XV535 to the required torque. I designed this socket which can be used with a smaller and a larger hex nut since I had to use two different torque wrenches. Printed with a…
- Pobrania
- 76
- Polubienia
- 6
- Ocena
- 5
P
PrintablesDomesticHacks
IKEA BESTÅ Vent
Just print it out, cut a hole into the door and glue it in.
- Pobrania
- 56
- Polubienia
- 27
- Ocena
- 0
P
PrintablesDomesticHacks
Spektrum DX6i Replacement Trim Tabs
Replacement trim tabs for your Spectrum DX6i transmitter.
- Pobrania
- 50
- Polubienia
- 10
- Ocena
- 5
P
PrintablesDomesticHacks
Kingston HyperX Cloud II Remote Desk Mount
Desk mount for the USB audio adapter of the Kingston HyperX Cloud II headset.
- Pobrania
- 47
- Polubienia
- 4
- Ocena
- 5
P
PrintablesDomesticHacks
Quadrocopter Wall Mount / Hanger
Simple bracket to store away a small (3 - 5" quadrocopter). I use it for my 5" GEPRC Mark4 (clone) frame and a custom 3" frame inspired by the Mark 4 (by https://www.thingiverse.com/skyline89/designs ). Print Settings Printer: Anycubic i3…
- Pobrania
- 38
- Polubienia
- 5
- Ocena
- 0
P
PrintablesDomesticHacks
Creality CR-10 Cable Guide for Direct Conversion
A cable guide for my Creality CR-10
- Pobrania
- 34
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDomesticHacks
Wall shelf (cable) spool holder (for Element System CLASSIC shelves)
Spool holder for the "CLASSIC" wall shelf system produced by "Element System". The mounts are tested. The spool holders are for hanging in small spools and are also tested and are working fine. The tape spool is not tested and most likely…
- Pobrania
- 33
- Polubienia
- 12
- Ocena
- 0
P
PrintablesDomesticHacks
Stanley Adventure Camp Cook Set Utilities Tray
Tray for the Stanley Adventure Camp Cook Set for holding cooking utilities like a spoon, a gas burner, lighter etc. when storing a small gas cartridge under it. Has to be printed in vase mode or with no infill.
- Pobrania
- 28
- Polubienia
- 9
- Ocena
- 0
P
PrintablesDomesticHacks
Thing ico Raspberry Pi Glass | Wearable Computer
This is a project I build for the first Maker Faire in Germany (in Hannover): The Raspberry Pi Glass (or wearable Raspberry Pi) Most of the project is printable with a 3D printer, I used gold colored PLA to get a retro futuristic look. In…
- Pobrania
- 25
- Polubienia
- 19
- Ocena
- 0
P
PrintablesDomesticHacks
Philips Bridge Wall Light Replacement Cover
Replacement cover for the Philips Bridge wall light. It fits the version with or without motion detector. Printed front down with 100 % infill, 0.2mm layer hight and supports.
- Pobrania
- 22
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDomesticHacks
Capacitor Bank (for a Commodore CBM 8032)
A capacitor bank I created for replacing one big cap in my Commodore CBM (PET) 8032. I prited it in PLA with a 0.35mm nozzle, 0.25mm layer height and a rectilinear infill of 0,25. There is also a (German) video about the creation process:…
- Pobrania
- 21
- Polubienia
- 5
- Ocena
- 0
P
PrintablesDomesticHacks
Silent 40mm Fan Mount, 3D Positionable (e.g. for Ramps and Prusa Mendel)
Fan mount which allows the fan to be tilted in all directions. The fan also is decoupled via rubber bands to reduce noise and vibrations. I prited it with a 0.5mm nozzle and 0.24mm layer height.
- Pobrania
- 19
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDomesticHacks
IKEA Jansjö Universal Webcam Mount
A simple adapter to mount a webcam to the IKEA Jansjö lamp. The adapter isn't webcam specific, it has a simple flat top to which you can ziptie your webcam.
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDomesticHacks
JGAURORA A5X Cooling Fan Nozzle
A better part cooling fan nozzle, since the original one is a piece of crap. I would recommend to use another fan since the original one isn't very strong, but if you want to make the stock fan a little better, you can use this nozzle. I…
- Pobrania
- 18
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDomesticHacks
![Environmental Sensor [WIP]](https://media.printables.com/media/prints/98944/images/1000936_60234269-4b9c-4a61-ad42-946ec21fd320/9db8ca111dbfb89a8f59606e4383acea_display_large_98.jpg)
Environmental Sensor [WIP]
Environmental sensor case
- Pobrania
- 14
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDomesticHacks
Atmel AVR Programmer Case for Perfboard USBasp
A case I printed out for my perfboard USBasp AVR programmer. I prited it in PLA with a 0.35mm nozzle, 0.30mm layer height and a honeycomb infill of 0,15.
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDomesticHacks
Prusa Mendel Y-Axis Cable Guide
A quick and dirty designed part for the Prusa Mendel to guide the cable from the heated print bed. Category: 3D Printer Accessories
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDomesticHacks
X525 V3 Quadcopter LED strip mount
I created some parts to mount LED strips to my Quadcopter.
- Pobrania
- 5
- Polubienia
- 2
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.