Liczymy pasujące modele…
UPDATES: 2023-01-19: Added the option to change the total height of the hook and save space. The parameters will automatically calculate home many vertical hooks are needed. The hook is placed at lower ¼ of height. 2022-10-14: Fixed the…
More updated designs on malerworld since i’ve moved to bambu printers : https://makerworld.com/models/661522?appSharePlatform=copy These nested cups are designed to fit in both the small and large bins from the Dewalt TSTAK Shallow…
remix of Spray Can Holder 4 PegBoard to add hook to pegs : https://www.thingiverse.com/thing:3657721 Category: Organization
Print with support sadly and 100% infill to give it rigidity.
A simple remix to print without supports...
Capsule holder for nespresso vertuo. It only has 1 side open, holds up to 6 capsules, but you can scale the length to get more or less capsules and make it fit for your needs. mine fits perfectly under an ikea wall cabinet.
Holder for spray paint can on a pegboard using the Sys's peglock system. I included 2 pegs on the build plate, but you can remove them or change them for the pegs that work for you. Go see Sys's Peglock :…
UPDATE 30-11-2022 : added lip and adjusted total height to 49mm Dewalt Pro Organizer Shallow Tstak / Stanley FatMax Pro Shallow cup replacement Category: Parts
split the design to make it printable on my ender3 pro
simple pegboard mount for Ryobi P117 charger
Changed my design to use the Sy's peglock system which is better pegs and more modular
Minimal Raspberry Pi mount for IKEA Skadis pegboard. No need for standoffs like original, use M3 screws (carefully, because M3 barely fit Raspberry) You'll also find original design in the STEP and f3d file to modify to your needs.…
I made a smaller version that has less spots for watch bands. Holds 5 bands
A remix of a simple USB stick holder (5 sticks) for the Ikea SKÅDIS (SKADIS) peg board. The 2 edge USB slots are further apart to allow slotting in a “fat” or wide USB stick. Also the pegs kept breaking off on the original, so i made…
S hook i used to hang my snow shovels to my car shelter to get them out of the way. Used parameters to make it easaly resizable to your needs
Was tiered of having the toy accessory laying arround so decided to hook it to the wand of the toy like the real thing
I needed to hang spray cans from my pegboard lower then where the pegboard ended. so i added a second spray can cup under the original one. And made it using the Sy's Peglock system since it's the best one i've found for pegboards.
Prevent light bulbs from rolling in storage
Needed the Echo show 5 screen to be vertical since it stands on a shelf at eye level. Scaling Z to 105% - 107% makes the screen even more vertical (See Makes)
single peg or double peg plate, if you use the double peg, I recommend only using the ‘flat’ peg for Sy’s peglock hook on the bottom one, not the curved peg, to provide rotational support.
This is a better version of my Dewalt battery mount for pegboard using Sy's peglock system. the batteries don't latch, so it's an easy one handed operation. Made a single and double battery mount. Included are peglocks that work for me,…
removed the center guides from mewil666 design to make it 1 big channel. Providing STEP and f3d files for customization.
Dewalt battery pegboard mount using Sy's pegboard system
I had to bring the apple watch charger up by 2.5mm, because my apple watch would stop charging. It was not aligned. I also made the hole for the airpods cable bigger since mine didn't fit and made the hole to push out the watch charger…
Organizer for Wahl Duo (peanut and regular) clippers
Wall mount for steamer with storage for accessories
Checkout my peglock version for simpler print and sterdier mount remix of Spray Can Holder 4 PegBoard to add hook to pegs : https://www.thingiverse.com/thing:3657721
Ubiquiti US-8/US-8-60W 19" rack mount with Keystone Jack
Stormtrooped handles for Ikea Milsbo cabinet. Press fit on original handles. Print whith no supports.
UniFi US-8-150W 19" Rack Mount with Raspberry pi mount
Drumstick holder for Ikea Milsbo cabinet Remixed from : https://www.thingiverse.com/thing:3703309 and https://www.thingiverse.com/thing:440988 Category: Music
This is a Dyson V10 attachement to allow a 3/4" pipe to press-fit in adapter with button. Also designed a point tip for the other end of pipe to clean hard to reach area. Post-Printing Attach the button with a pin/nail/paper clip and some…
Artika Monsoon2 soap tray shelf replacement from costco
Rubbermaid 121 L (32 Gallon) Outdoor Trash/Garbage Can/Bin replacement handle. No support, press fit so no screws or glue needed, but can be added for extra strength
I remixed the skadis led strip holder to allow the attachements of nanoleaf's lightstrip which is a bit thicker because of the silicone protector remix from : https://www.thingiverse.com/thing:5141862 Category: Organization
This is a part i designed inspired buy the thingiverse sources listed. I wanted a side mount for my ender 3 pro and to keed it at original spot 4010 fan and 5015 fan design UPDATE I prefered redesigning the side mount duct to allow the…
this is a remix from the thingiverse : https://www.thingiverse.com/thing:4393969 You can print just the top and add it on the original print or print both part. I had to print it at 103% because of the decal stickers on the legs. use…
This is an adaptor for the Garbage Bag Roll Holder by argentcove, i needed to install it under my countertop and not on a vertical surface. Used construction adhesive to glue it under my countertop, cause mine is marble, but you could…
Designed a webcam mount for Dell monitor.
These are simple ramps to assist with storing screwdrivers in a toolbox drawer.
Created some space on the side duct mount to allow the installation of the bl touch mount that came with my bl touch (similar to this mount but in metal : https://www.thingiverse.com/thing:3978365 ). works with 4010 fans only for the…
This is a replacement part for the Maxi-Cosi Lila stroller front wheel rotation lock. Should work on any Lila style stroller. Best to print with "Tree" support to remove the center support. You will need the spring and pin from original…
To wszystkie aktualnie dostępne wyniki.
