24 modeli
I made a holder for two and four batteries with a handle to make it easier to carry. I printed it with PETG plastic, laid on its side. Supports are required.
Wydruk około 5,99 €–7,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed it, I couldn't find a suitable one, so I made it. You don't need to tighten the screws very much. The only difference between 10mm and 15mm is the thickness of the central part. Check video: https://youtu.be/HwB9THFWT2w
Wydruk około 3,99 €–4,87 € nettoWstępna wycena jednego wariantu
To put the ring back in place, you will need to unscrew the grill, put the ring back in place, and screw the grill back in place. I stuck colored labels on the console with double-sided tape. Category: Gadgets
Wydruk około 1,22 €–1,50 € nettoWstępna wycena jednego wariantu
The buttons on the tape recorder were broken. I printed the prostheses and glued them on. Check video https://youtu.be/IVWlkcGp7GQ
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
LCD Knob Heart
Wydruk około 0,46 €–0,57 € nettoWstępna wycena jednego wariantu
The standard trim didn't fit, so I made one. I did not save space. check video
Wydruk około 1,70 €–2,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I suddenly needed a UV chamber, so I quickly created a simple UV chamber from what I had. I didn't have much time, so I corrected the mistakes by drilling and gluing the missing elements instead of printing a new one. This saved me time…
Wydruk około 4,96 €–6,07 € nettoWstępna wycena jednego wariantu
This project is easy to print and assemble. No suport, no raft. Perfect for anyone into 3D printing, DIY projects, and practical solutions. check video https://youtu.be/7ZpxpdBN5s0
Wydruk około 2,68 €–3,28 € nettoWstępna wycena jednego wariantu
I decided to build a UV chamber with a timer. I used a timer switch and a motor from a microwave oven. I also used several platters from old HDDs. The power supply and UV LEDs were purchased. The aluminum profile is 20×10×220 mm. The…
Wydruk około 2,17 €–2,65 € nettoWstępna wycena jednego wariantu
This project is easy to print and assemble. No suport, no raft. I used PETG, because i will use in car. Perfect for anyone into 3D printing, DIY projects, and practical solutions. check video https://youtu.be/7ZpxpdBN5s0
Wydruk około 5,31 €–6,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is probably a problem in all golf 3. I printed petg, bcs i don't like print with abs. 100% infil. 2024-10 Update. V3 is only longer, V4 and V5 I made it more convenient to print at an angle without support. Inclined at 30 degrees.…
Made a house for rats. Check video https://youtu.be/jp08GaRfXHk Category: Pets
All parts printed with standart setings. Print 2 of "zvaigzde_puse.stl" or 5 of "zvaigzde_5dalis.stl". Check video Category: Food & Drink
Flame printed 1 layer perimeter, 0 layers top, 0 layers botom Electronic candle improvement: https://youtu.be/NLtmb8IC2uQ video How I Designed This Category: Decor
All parts printed with standart setings. to make square you must print 2 parts of "keturkampis 3x3" or 2 parts "2x2_kvadratas". To make triangle you must print 3 parts of "trikampis". check video 3x3 - 30mm X 30mm, 2x2 - 20mm X 20mm How I…
I got tired of holding resin vat over the bottle until the resin dripped, so I made a holder. Don't need suport. Check video Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill:…
Standart setings. check video How I Designed This Category: Vehicles
The grille plastic I bought didn't fit the speaker holes, and I didn't want to grind or break anything, so I printed those that fit. check video Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2…
The funnel can be used with or without the strainer. The inner diameter of the funnel is 90 mm. The ring is designed to press down the edges of the filter to prevent unfiltered liquid from leaking through.
I know it can be bought inexpensively, but I wanted to do it myself. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.1 Infill: 25% Filament: Spectrum Flex pacific blue How I Designed This…
All parts printed with standart setings, and 100% infil check video Category: Outdoor & Garden
It was necessary to cut a lot of holes in the film. To save time, nerves and health I made a divider / cutter. check video How I Designed This Category: DIY
I don't know what car the knob came from, they just gave me a broken one and said "do something." Does anyone know what kind of car this is? Check video
I have a few rats. They like to lie in a hammock. Rats are rodents and there is nothing strange about breaking hammock limbs. Sew new pointless - they cut again, so I printed. Printed with standart setings. Check video Print Settings…
To wszystkie aktualnie dostępne wyniki.
