P
PrintablesRPI
Polydryer dust cover
Use any material you like No supports needed *Edit: I opted for a looser fit, it has no play but if you would like a snugger fit let me know.
- Pobrania
- 817
- Polubienia
- 152
- Ocena
- 5
Wszystkie modele
Liczymy pasujące modele…
P
PrintablesRPI
K1C screen cover
There are allot of great screen covers but I wanted one that did not touch or rub too much on the bevel to avoid scratches. No friction fit needed due to angle of the screen. Print as is no supports needed. Can print in most materials,…
- Pobrania
- 392
- Polubienia
- 49
- Ocena
- 5
P
PrintablesRPI
Bogg Bag cellphone holder
Would recommend ASA or ABS as these bags are usually used in beaches etc. Large enough for a S22 with slim case
- Pobrania
- 391
- Polubienia
- 112
- Ocena
- 5
P
PrintablesRPI
Carburetor tool splined
This is a great tool but had to make a small change to fit my carburetor
- Pobrania
- 264
- Polubienia
- 8
- Ocena
- 0
P
PrintablesRPI
AFU adaptor for Anycubic resin bottles
Pretty new to resin printing, used stock profiles. Material used: abs-like resin
- Pobrania
- 149
- Polubienia
- 6
- Ocena
- 0
P
PrintablesRPI
Inbetweener mod
Was able to pint without support but you might want to add some in the void.
- Pobrania
- 128
- Polubienia
- 10
- Ocena
- 5
P
PrintablesRPI
polydryer bowden tube stopper
The tube that comes with the polydryer is too long and thick imo. I also did not want to cut them, so i used a a piece of bowden tube but it kept slipping out. So i came up with this, you just shove the tube in (giggity) and use the…
- Pobrania
- 111
- Polubienia
- 31
- Ocena
- 0
P
PrintablesRPI
Ford Ranger/Mazda B2200 Oil Dipstick
Print laying down, some support is needed due to orientation. Use temp resistant material I used petg but i would suggest asa or abs. So far it held up. This was for a 2010 model check if others will use the same.
- Pobrania
- 105
- Polubienia
- 18
- Ocena
- 0
P
PrintablesRPI
Pothos Holder for aquariums 10 gallon
Recommend printing upside down Supports needed.
- Pobrania
- 97
- Polubienia
- 8
- Ocena
- 0
P
PrintablesRPI
Stanley cup holder
Print as is Any material can be used I used pla Printed individually, so you can add any type of attachment you like on the back. I used 3M inserts for these prints They gifted my daughters these cups but they are too heavy to walk around…
- Pobrania
- 87
- Polubienia
- 20
- Ocena
- 0
P
PrintablesRPI
Creality k1c nozzle + Ceramic Heating Block Kit case MOD
Slight remix Print with whatever and no supports needed Seems my printer needs some tweeking, noticed some banding
- Pobrania
- 77
- Polubienia
- 9
- Ocena
- 0
P
PrintablesRPI
UPDATED: Bowden Y splitter & cover for K1
Print as is. Use ABS, PETG or ASA Uddated to use PC4-M6 fitting Use the small screw from the filament sensor to secure
- Pobrania
- 64
- Polubienia
- 11
- Ocena
- 5
P
PrintablesRPI
K1C Buffer plate Horizontal & Vertical
Suggest using a more durable material other than PLA. Print without supports It is friction fit 2x M3x10 screws needed Added Vertical plate UPDATE: improved vertical fit
- Pobrania
- 58
- Polubienia
- 18
- Ocena
- 0
P
PrintablesRPI
TP-Link Omada er605 wall mount
Printed in PETG Suggestion: Print at a 45 degree angle with the screw holes and pegs facing up. Support: Tree/organic Infill: I used 15% but I suggest 25-45% but I have had no issue so far Device clicks in place, I added stand-offs…
- Pobrania
- 54
- Polubienia
- 4
- Ocena
- 0
P
PrintablesRPI
Rear and side inbetweeners remix
Suggest to rear panel standing with supports. Print with ASA or ABS or it will warp if you print closed with high temp.
- Pobrania
- 48
- Polubienia
- 1
- Ocena
- 0
P
PrintablesRPI
lighter butane purge
I did not like the idea of shoving metal rods in my expensive lighter to purge the butane before refill, so I made this tool. Material: Any Infill: 15-20% print: standing up P.S. Added compact flat model if you need a longer snout let me…
- Pobrania
- 47
- Polubienia
- 4
- Ocena
- 5
P
PrintablesRPI
Creality K1 / K1C Unibody Riser Hexagon Prear plate mod
For use with: https://www.printables.com/model/833692-creality-k1-riser-with-cable-chain-removed Print face down abs, asa or petg
- Pobrania
- 36
- Polubienia
- 5
- Ocena
- 5
P
PrintablesRPI
Werner step ladder bracket
Bracket for Werner step ladder, might work for other brands. Print: Use a hard material like asa, abs or petg. Print vertically for improved strength. Could have added a bit of an angle but i wanted it snug. Lips are a bit high, can edit…
- Pobrania
- 34
- Polubienia
- 2
- Ocena
- 0
P
PrintablesRPI
Rear inbetweener and modified corner
Made to work with the gap fill https://www.printables.com/model/918559-creality-k1-k1c-lid-gap-fill-top-cover-hole-close/remixes
- Pobrania
- 32
- Polubienia
- 1
- Ocena
- 0
P
PrintablesRPI
Balloon inflator tip
Material: Any Infill: 50+ Print as is no support, brim most likely needed
- Pobrania
- 31
- Polubienia
- 5
- Ocena
- 0
P
PrintablesRPI
Basilisk V3 X HyperSpeed mouse wheel
For best accuracy please use resin printer. Clear resin used in example
- Pobrania
- 21
- Polubienia
- 1
- Ocena
- 0
P
PrintablesRPI
Wreality Arm + 220 accommodate bltouch pins
remix to fit components
- Pobrania
- 20
- Polubienia
- 2
- Ocena
- 5
P
PrintablesRPI
Roach/ant gel nozzle
Replacement nozzle for gel syringe. Common for Cockroach and Ant gel syringes
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 0
P
PrintablesRPI
HTLF K series hex mounts
Use the hexagons on the back of the k1 series printer to mounts your units
- Pobrania
- 17
- Polubienia
- 6
- Ocena
- 5
P
PrintablesRPI
M4 thumb screw
Screw for my scope mount got stripped so i made this replacement Infill: 45%, can make it solid for even better durability Material: pla-cf Pause at layer 75 to insert M4 nut Print as is, no supports required
- Pobrania
- 16
- Polubienia
- 1
- Ocena
- 0
P
PrintablesRPI
Brabantia profile replacement/additional hanger
Hook for Brabantia profile. Print on it's side with supports Material: any except tpu ofcourse lol If you want one for the spacer let me know I left it like this for ease of printing
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesRPI
Irwin Hanson extractor set case
Hard case for the extractor set, did not like the soft plastic envelope they came in. Print in place, no supports needed. Box snaps shut Printed in petg but any material should be fine
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesRPI
Bowden minder
Material: Anything but PLA Infill: small enough for 100% Adds the ability to store the bowden tube when you have to print directly with more brittle material. Also when not in use you can inserts a small bowden piece that you can use as a…
- Pobrania
- 8
- Polubienia
- 6
- Ocena
- 0
P
PrintablesRPI
O-cedar refill cap pin
Kids lost the little plug while playing around with the mop. Print as is any material Push fit
- Pobrania
- 6
- Polubienia
- 2
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.