Liczymy pasujące modele…
The original Part part did not fit on my boxes. I wasn' t able to mount it on the box without it breaking apart. On my box the material perhaps is a little bigger? In addition, it would not have been possible to open it because the…
This is a easy printable housing for an ESP and the GC9A01 display. I used theese parts from Aliexpress: https://de.aliexpress.com/item/1005009157701999.html?gatewayAdapt=glo2deu…
This ist a knob for a M8 thread with a integrated M8 hex-nut. To insert the nut, you have to stop your printer bevor the slot is overprintet. For example in Prusa Slicer you can use the filament change funktion. Infill: 50% Layer: 0,2
This is a simple knurled nut. A standard Metrical nut can be inserted into the printed one. I fixed it with a drop of superglue. If you need othe dimensions, please aks in the comments. I can draw and add them!
This is a mounting plate that fits into the Jung LS 990 system. The fingerprint sensor R502-F (waterproof) can be inserted from behind and fixed with the clamp. The connection should be positioned downwards. The whole fits onto the Jung…
The model is a remix of this: LINK I changed the size for a condom with a packaging size of 46x68 mm. And for better removability I addet a notch. I also made a few other designs, you can print the case and the insert with 2 different…
Helping hands suitable for soldering. The plate can be easily clamped to a table with the aid of a spring clamp thanks to the matching recess. The tubes are screwed in and fixed with adhesive. The crocodile clips must also be bent to fit…
The holder can be printed without support, fits the GL.iNET devices with the small housing, e.g. Mango or Shaddow . It is designed so that it clamps on its own, but a zip tie (4.8 mm wide) can also be used (for overhead mounting) The two…
A very simple and compact fence for mounting in the Festool guide rail. Can be used for routing with the router, for example. An M5x16 (or longer) screw with hexagon head is also required. Also a screw, either a normal wing nut with…
This part is for quick adjustment of the height of the rotating chisel. You need the printed part, a 608 ball bearing, a steel round bar (must be turned to fit), and M5 bolts with nuts. Additionally you need a small spirit level, I use a…
With this thing you can rapair your broken protective rubber sleeve on the Beyerdynamic MMX 300 headset cable. You have to print the part twice. To open the earpiece you hav to do a few easy steps. Remove the earpiece cushion, than you…
This is a small part for the Festool MFT3. A snapfit holder for the pica-dry pencils. Print it in this orientation:
Now that the original holder has broken several times, I have decided to make a reinforced version. The holes are for M5 screws with hexagon socket head. I thought the original design for Phillips screws was no longer up to date ;)
You need a 20 mm electrical installation tube, you can get it in a DIY Market or an online shop. The part have to be glued on the tube. Than you can wrap it with cleaning rag. I save it allways with a elastic band like bungee cord. It was…
This is a Button for a cord loop. You can use any kind of string, it should have a diameter of about 4 mm. First thread the two ends through the slit in the middle. Each end on one side. Then knot the ends and pull them back.
This is a compatible cap for the Eaton M22 pushbuttons. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0,2 Infill: 100% Category: Electronics
The part is for Neutrik D-series sockets. The two M3 nuts are inserted by interrupting the print at the proper layer. (Can be set in the slicer)
The model is still under construction!
The housing is for the OpenKNX Fingerprint PCB. https://github.com/OpenKNX/OAM-Fingerprint/tree/main https://knx-user-forum.de/forum/projektforen/openknx/1954741-openknx-fingerprint The two parts can be printed easily, with the flat side…
This is a housing for a cheap DCDC Step Down Converter. The used cabel ist a 2x0,75mm² LAPP-Kabel UNITRONIC® LiYCY 2x0,5mm² but you can also use others. The box can be mounted on a 20x20 aluminium profile on your 3D printer. You can push…
I constucted this end caps for the solar rail mountig system from tepto: https://www.tepto.de/SILBERNES-Schraegdach-Montageset-fuer-2-Module-senkrechte-Montage-Photovoltaik-Balkonkraftwerk-30mm I used PETG with 30 % infill. Easy to print…
The part can be used on a Jung 245.07 dimmer if the original bracket for the cover is broken. Other dimmers and covers will probably also fit. I printed it for better stability, as shown in the screenshot from the slicer. The adhesion was…
The housing is suitable for the “AVR Node - DMX Ethernet Gateway” from Ulrich Radig. The kit is required: LINK One XLR socket e.g. Neutrik NC3 FD-S-1-B The fixing plate: Neutrik MFD or a printed nut holder A few M3 countersunk screws (2…
With these clips you can fasten an electrical installion cable on a rack rail. It fits on the most rails you can get in Germany in a DIY Market. The notch is 3,5 mm wide and should be at least 16 mm long for it. It is made for a NYM-J…
A label for Neutrik's D-Series devices. The text can be printed on the label using the labeling function in Slicer.
A holder to attach 4 Wago terminals to a Nema17 stepper. So You can easily connect the Stepper wires to longer wires. Print it with the WAGO site down with no support. If it does not hold strong enough, use a pice of double-sided adhesive…
This part ist for the replacement of the Barrier Bar on a Stihl KMA. The nuts are inprintet, be shure your printer can pause for inserting the nuts and you have to configure it in your slicer correctly. Perhaps it also fits on other Stihl…
Adaper to be able to attach a Hue remote control under a simple switch / socket, etc.. Fits for the JUNG system ST-550, it can be mounted in any orientation. The original frame is replaced with the printed part. The remote control holds…
A label for Eaton's M22 devices. The text can be printed on the label using the labeling function in Slicer.
This is a storrage box for the Sola Go. I made this becaus of the magnet always chips stick on the bulb. With the case they stick only on the box.
The part is used to protect the thread of the spindle when using collets. Inside is a M40x3,5 thread. On the outside are 3 recesses in which the hook wrench fits. I printed it with PLA, 30% infill with no support material. (Possibly it…
THE MODEL IS STILL UNDER CONSTRUCTION! For the construction you need a 3D printer and ideally a CNC milling machine to be able to mill the part according to the DXF. Alternatively, you can of course also drill round holes or mill out the…
The adapters are intended for use when aluminium profiles are to be used instead of pipes. The parts are printed with the same settings as the rest. First they have to be screwed onto the aluminium profile, then the corner can be mounted.…
With the help of this mounting frame, the Open CNC Shield can be easily attached. 6 nominal M3 nuts are required. These are inserted into the printed part.
Adapter for the PicoPCU connector in a C14 mounting hole
You can easyly print them with every printer. For color change use the funktion in Prusa slicer. If you need another sign, write in the comments!
To wszystkie aktualnie dostępne wyniki.
