Liczymy pasujące modele…
Business Tier members will have exclusive rights to use physical prints of this model for commercial purposes during their active membership. Note: Reselling of 3D model files is not allowed. Edit: Variations added due to comments and…
Business Tier members will have exclusive rights to use physical prints of this model for commercial purposes during their active membership. Note: Reselling of 3D model files is not allowed. Some fun dog bookmarks. If this goes well,…
Harry Potter/Deathly Hallows Ornament. Printed out of PLA. 10% - 15% infill No supports
I wanted to make some fun pieces for the balance game. They are the same height as the Joe Prusa piece. They vary a little, but are within 0.50 grams of each other. PLA 10% infill with 3 walls No Supports
The Base is 6.5 inches in diameter. You print all of the walls twice and assemble them to make the diameters twice as large. This leaves you with a display that is much larger than the original and will fit an extra candle. PLA 10%-15%…
Carabiner and gear organizer. PLA, PETG. 20% infill. .04mm Nozzle. 0.2mm layer height. No supports.
A party favor that is quick to print and fun to use. Printed in PLA. 10% Infill. Now supports. 0.4mm nozzle with 0.2mm layer height.
I designed this trainer to offer as many grip options as was practical. The two center holes will allow for an 8mm or 9mm rope to be threaded though so that you can add weights to it. I have hung off of it, but I primarily use it to warm…
This callus sander is an assembly that will sandwich a piece of sandpaper in between the two pieces. I find that you should cut the sand paper about 6in X 3in (152mm X 76mm) to fit the dimensions of the sander pieces. Printing these in…
These are scalable ears for corners or small sections of your print. The unique designs allow you to put the ears in spots that can be easily removed. They are approximately 13mm in diameter (0.50") and approximately .5mm thick (0.02").…
I needed to make a bag holder for our plastic bags. I came up with this design and we really like it! It simply lets the Ziploc bags hang off of the fins over our sink and the bags dry very fast. The fins are staggered so that you can lay…
I remixed the original model so that the handle and bucket are one piece. Printed in PLA. 15% Infill. No Supports.
Note: This only works for all wire gate draws. It will work on some solid gate draws, but not all of them. Tubular style clip-stick. Threads directly to a standard paint stick. Printed in PETG. 25% infill. I think it needs supports for…
A simple mountain scene ornament for 2023. Make sure to print it facing toward your bed so that the texture becomes the surface. Printed in PLA.
Business Tier members will have exclusive rights to use physical prints of this model for commercial purposes during their active membership. Note: Reselling of 3D model files is not allowed. Flower frame for holding small dried flower…
I designed and made this tray that includes a scaled model of Half Dome. I thought it looked really nice that the Yosemite valley is the bottom of the tray. I printed it in PLA with about 20% infill and no supports. The only thing extra…
My daughter's goggles broke and I found the clips available to be pretty bulky. I used the idea of the strap for masks and made something that is, I feel, far more slim/comfortable. PETG 100% Infill No Supports
I had this idea for a pinch holder and I thought it would be fun to make it look kind of like a parrot. I painted it and thought it was fun to do, so here it is! Should make a fun family-night paint project.
A simple key tray with Mount Fuji in along the edge. Printed in PLA. 0.4mm nozzle. 0.2mm layer height. 10% infill. 4 walls. No supports.
To wszystkie aktualnie dostępne wyniki.
