Liczymy pasujące modele…
It has a longer height because it needs to hold the screwdriver with longer bits like WERA PH-Bits 851/4 J PH 00x89 mm with a length of 89mm. Feel free to edit if you need another height :)
Printed with PLA with strength preset No supports needed. You need 2x M3x6 DIN912 screws and a M3 screw tap to rework the 2 M3 threads on the bottom. I used a common USB-C cable.
I needed a custom-sized shelving unit, so I used 20x20 mm profiles and 18 mm thick boards. The design requires no supports and is optimized for PETG printing. In V2, I adjusted the top bracket for the upper board to achieve a cleaner…
Suitable for the Fnatic Gear Rush LED Pro Keyboard Nozzle: 0,4mm Height: 0,2mm Support: Is needed for the pins. Material: PETG but PLA should work as well.
Dimensions of the cutout: 45,9x25,4mm
You need 2x longer screws for the clamping of the rods. Like M4x10 or M4x8 screws. Orientation as shown in the image. You have to mirror the model so that it fits on the other side. Printed in PETG for the durablity. I hope it will stay…
I bought the extensions on Aliexpress. Please check the dimensions against the provided drawing. Feel free to edit it to your needs. Filament: PETG or TPU → You have to tinker around to get a tight fit Supports: not needed
Suitable for the Sodapop Joy Eco bottle. Technical dimensions: Spike 29mm and flange 90mm Nozzle: 0,4mm Height: 0,2mm Support: not needed Material: PETG but PLA should work as well.
I used 4x ⌀6x3mm magnets. The cutout is 102 x 10 x 140mm wide.
Printed in PLA with brim because of the radius. You can try it without! The diameter of the touch pen is 7mm. Hole dimension: Diameter 7,3mm x Length 19mm Feel free to edit it if your pen has different dimensions!
My steam deck dock had a poor connection with occasional disconnections with the steam controller and my logitech wireless keyboard. By extending the USB interface I was able to improve the connection significantly. That's why I bought a…
Printed in TPU
I had a few problems with the carbon box holder. It didn't stay well in the holder when the fan was on. That's why I designed a simple clamp.
Royal Enfield uses an M6 thread inside the handlebar, which doesn't fit the standard Acerbis handguard mounting hardware. To fix this, I designed an adapter that accommodates an M6 countersunk screw. Dimensions: 10 mm outer diameter, 4,4…
To wszystkie aktualnie dostępne wyniki.
