Liczymy pasujące modele…
Print 1x handle and 1x shaft, with length of your choice, and glue them in place. Print shaft with a relatively stiff material. PLA, PLA+, PLA-CF, PETG-CF and PC-CF. Do not use PETG, ABS, ASA, and Nylon, they either fail to maintain…
This is originally designed for a retractable brush purge system for Rat Rig V-Core 3, but it can be mounted on any 3030 aluminum extrusion using M5 bolts and t-nuts. BOM: 1x MG996R servo 2x M5x10mm bolts 2x 3030 M5 T-nuts 4x stock servo…
New update: added Open Front/Enclosure 2 rear XY motor cage tops and front XY motor cages New update: Changed the rear XY motor cage tops, and no bottoms are needed. In this change, the rear XY drive pulleys are visible and it's easier to…
This is a static cooling fan if you think the toolhead cooling is not powerful enough or wanting to reduce toolhead weight. This duct is made for Delta PFR1212DHE, but it should work on any standard 120x38mm fan. It can be mounted to 3030…
This is an improved design from the Rat Rig V-Cast 1.5 Wideboy IDEX, it has quad Y motors and decoupled lead screws using oldham couplers. The X motor cages are also improved so they can be printed. But it is made for converting from a…
This mod is intended to take lateral stress and belt tension away from XY motor shafts. By using steel rods that are mounted on both sides of the pulley with bearings, the rods will handle the belt tension, and the motor shafts are…
This is the stepper motor cooling fan mount for Rat Rig V-Core 3. 40mm fans are used. It can be mounted to 3030 aluminum extrusion with M6 bolts and T nuts. The fans can be mounted with universal self tapping PC fan screws. Use with…
This is a static cooling fan if you think the toolhead cooling is not powerful enough or wanting to reduce toolhead weight. This duct is made for Delta PFR0912XHE, but it should work on any standard 90x38mm fan. It can be mounted to 3030…
These parts are for people building the Rat Rig V-Core 3 without an electronics panel. No supports or rafts required. All parts except the LM2596 bracket can be mounted to 3030 aluminum extrusions with M6 bolts and corresponding T nuts.…
ERCF with parts changed to Rat Rig logo for use on Ret Rig V-Core 3.
Direct replacement of EVA 3 small shroud. Endoscope camera can be pressed into the bottom hole, and use an M3x6 bolt to secure it in place. Do not overtighten to avoid damage.
USING MY FILES FOR COMMERCIAL PURPOSES IS STRICTLY PROHIBITED! You can: download, edit, and print yourself a Viotar. You cannot: sell the files or your Viotars to make profit. V2 is in the make. Made in Tinkercad. Parts will fit in 300mm…
This is the NEMA 23 adapter plate for Rat Rig V-Core 3. It replaces the NEMA 17 mounting plates. The electronics frame needs to be moved a few mm towards the front to make clearance of the NEMA 23. No other parts need to be changed. Use…
For use with MFBS's Fast Swap carriage
Fits Acer 35mm monitor stand.
Use 4mm OD M3 heat set inserts on the bottom, and use M3x6mm bolts to mount top in place.
It fits on 35mm monitor stand pole. Use M3 bolts and M3 4mm OD threaded heat set inserts.
This mod is intended to take lateral stress and belt tension away from XY motor shafts. By using steel rods that are mounted on both sides of the pulley with bearings, the rods will handle the belt tension, and the motor shafts are…
To wszystkie aktualnie dostępne wyniki.
