Liczymy pasujące modele…
With this model you keep your swivel in the normal orientation without the need for offset hinges. This way you can mount other stuff without needing to adapt everything for another angles.
Taking inspiration from the flag indicator by @misterT, I did some modifications in order to accomodate a pro-micro with type-c to modernize it a bit since nano uses micro usb.. Do let me know if you come across issues. The pro-micro I'm…
Made a small change to the original model, brought the holes a bit inwards and made the middle connect with a dovetail to save 4 screws and nuts in total. Printed in Creality PETg with 15% Grid infill and 3 wall loops for a bit added…
Parts are oriented and ready for printing. Make sure you have enabled: Detect Thin Walls for the hole caps I printed with 4 walls and 25% Cross-Hatch infil for improved strength. You can use 4 or 8 M5x16mm socket head screws and T-Nuts…
Made a few improvements to the original design. Read below. Don't mind the warping of the middle part of the flag, I forgot to put brims when printing and it warped 😁 In the last photo you can see the old model and how there is a gap on X…
Got my self the new Neo HPR by simagic for my rig and couldn't find any adapters for them so I made my own. This adapter works for Throttle and Clutch only. I have an original P-HPR haptic reactor on my brake and I had found already an…
Just a simple holder for IEMs for sim rig 4040 profiles. You'll need an M5 or M4 bolt, both work, length around 12-14mm, and a T-Nut Print on its side for the best strength, no supports. 0.08 layer height takes less than 1h to print and…
An alternative solution to the hinge mount
To wszystkie aktualnie dostępne wyniki.
