Liczymy pasujące modele…
updated 6/2/23 Found out there are dimensional differences in Puffs vs Kleenex brand thanks to user @Willy. Made and tested a Kleenex version (see .stl) and decided to share the parametric .f3d file. Parameters are pretty straight…
Designed with catnip in mind but it works nicely with stuff inside to rattle. Bells too! PLA printed at .2mm. Supports help on ball (20% overhang, build plate only.) Not needed on screw plug.
Quick and simple tilted paint rack for Testors enamels. Companion to Model Master / Round Rack found here . I wanted something that would fit nicely in a drawer on an Ikea Alex Drawer unit that would make more paint visible for unopened…
The lids on this stuff doesnt last as long as the glass. Rather than buying new sets and discarding the old glass, I made these. I print them out of PETG as it's somewhat food safe, although I'm not sure how food safe anything FDM printed…
Simple shelf bracket. 75mm x 30mm Intended for 10-12cm deep shelves. Print Settings Printer: Railcore 300 ZLT Rafts: No Supports: No Resolution: .2 Infill: 15% 3D Honeycomb Filament: Overture PETG Marble Notes: Made this to support small…
Quick and simple tilted paint rack for Testors' Model Master paint. Also fits Humbrol and Revell. Hole is 33mm so it may work for others as well. Companion to my Testors racks here . I wanted something that would fit nicely in a drawer on…
Case for Zixtec LM2596 buck converter Print Settings Printer: Railcore Rafts: No Supports: No Resolution: 200 Infill: 15% 3D Honeycomb Filament: Tecbears PETG White Notes: I printed out a couple of different cases for these but nothing…
Wanted a simple, snap-fit spool for filaments from a Paramount3d sample pack. I've included both 15mm and 30mm versions. Any combination of 2 should snap right together so you could actually make a 22.5mm version if desired. If you print…
These books are all intended to go with reddadsteve's wonderful Opus Library model . Big thanks to him for releasing this into the world and for coaching me through some of the machinations of Blender! I felt like Opus might be shocked by…
Replacement wingnuts for the bar clamps on the Alesis Nitro Mesh series. May work with others. Bought a DM7X off C/L only to find that some of the wingnut housings for tightening the bar clamps on the drum rack were broken. Also had a…
I printed mine with 15% infill on both parts. Recommend higher to give both parts more mass. Kyuubi Rose Gold Silk PLA. Printed at .2mm LH. Layer lines on the lid are a bit more than I would like. .1mm or less should only improve. No…
Replacement volume knob for Alesis Nitro Mesh DM7X controller. Picked up kit on C/L for teenage son and rehabbed it. Volume knob was missing so I printed one up. Figured I'd share it in case anyone else needed one. Drilled a tiny hole…
I couldn't find any of these for the “Smalls” tins so I made my own. I laid out three different versions: All micro SD cards Combined tray for adapters and SD cards All Adapters TPU works well for this. My print settings: LH: .03…
All those really nice but serious filament swatches from the contest.. I just wanted something a little more irreverent. Based on the old “Barrel of Monkeys” game. Plenty of barrel models out there you can print for storage or just leave…
I made this so I could wire the outlet up to a power supply on my bench and not shock myself because I ran out of insulated disconnects. I figured others might benefit from it. This is a remake of thing 2234072 by larsch. Unfortunately,…
Remix of wwendorf's extremely useful cable clip for Misumi 1515 extrusion. I wanted a second, separate channel for wiring for my LED lighting kit and for anti-crash kit Z-axis can be scaled to adjust as desired. This thing is intended to…
This is a remix of the Lumberjack Engineering design found here . Same issue apply re: clones / off-brands. I have the MRW cover and related cover interface components installed on my 300ZLT which pretty much renders all of the 1515 rail…
Had to have switch replaced on my Nutone 2736A downdraft vent. Home warranty company replaced the switch but said the cover was “cosmetic” and not covered so I made my own. Part number is 99111235 Shaft on the little plastic switch was…
Simple TPU aid to protect the nice finish on your bathroom faucet when replacing the aerator. Mine were all caked with mineral buildup and the aerators were overdue for replacing. Used this to protect the chrome plated aerator retainer…
Modified jstevewhite's cover interface for railcore to allow the use of a PC4-M10 push-fitting on the inside of the printer so filament could be fed from the outside. Print Settings Printer: Railcore 300ZLT Rafts: No Supports: Doesn't…
Replacement screw insert to support M8 threaded rod-based universal spool holders. It is essentially just a cut and rejoin of the spool holder part from wwendorf's thing (below). Uses frame mount from: Filament Spool Holder for Railcore…
Warning: This project, as designed, calls for a 650nm 5mw laser. NEVER POINT A LASER AT ANYONES EYES, INCLUDING YOUR OWN, EVER! That means using proper safety equipment and being aware of reflective surfaces. BE SMART. BE AWARE. BE…
Modified rail-mount piece for cynical_owl's railcore drag chain ends to be cover-interface friendly. Print Settings Printer: Railcore 300ZLT Rafts: No Supports: No Resolution: .1 Infill: 15 Filament: Atomic PETG Starry Night Notes: I've…
To wszystkie aktualnie dostępne wyniki.
