Liczymy pasujące modele…
Rectangular Planter with Wood Texture Dimensions: Width: 18 cm Depth: 11.5 cm Height: 10 cm Print Settings (Prusa Slicer 0.25 Structural Preset): Perimeters: 2 Infill: 15% Layer Height: 0.25mm Filament Used: Printed with SUNLU PLA Matte…
EDIT 02.03.2026: Added an alternative version with grip grooves, which can provide improved grip in certain door and flooring combinations. The Flex-Hex-Hook is a compact, flexible door and window stopper optimized for TPU printing. The…
I printed it with my MK4S as follows: .4 nozzle .28 draft preset (prints in 1h39m) PETG 4 perimeters 15 % infill Would love to see your makes! :)
To prevent warping, I used a skirt and limited cooling to a maximum of 20%. Nozzle: 0.4 mm Layer Height: 0.25 mm Infill: 15 % Skirt: Yes Supports: None Material: PETG Just in case you wonder: I mirrored the model before printing, that is…
Additionally you'll need: 3 x M3x20 mm screw (or 1 M3x20 mm and 2 M3x16 mm screw for the version with the threaded inserts) 1 x M3x30 mm screw 1 x rubber band
This small cap, printed from TPU prevents screws from slipping when used to clamp things (e.g . table vise as seen below). Printed from Overture TPU 95A .15 mm layers 4 perimeters 6 topps/bottoms
Simple Wrench Hanger for Honeycomb Storage Wall (HSW). Designed to securely hold wrench sizes 6-19. The hex holders are arranged thoughtfully so the two files align seamlessly when placed next to each other on the wall. Why I designed…
I created this design after losing my battery cover on a rough trail and finding that a replacement was out of stock everywhere. Even SRAM couldn't point me to an online shop with one available! If you take a close look, you might notice…
Check out my newly designed add on, which adds 9 additional degrees to the wedge! :) Design & Features 18-Degree Angle Two-Part Assembly : Designed to be printed in two pieces and easily snapped together without glue, ensuring…
This custom-designed Tamper Station is the perfect companion for the Umikot 58mm planetary gear espresso tool ( Umikot on Printables ). It offers dedicated slots for: Dosing ring/funnel Tamper Distributor/Leveler Puck screen Bottomless…
Install with an M3 or M4 countersunk screw. I printed it as follows: PETG .1 mm layers .4 mm nozzle no supports 5 perimeters Would love to see your makes! :)
Since I could not find it anywhere and have already lost the original part twice, I designed the crank arm cap myself. A replacement (not even an original) costs around € 8,- on Amazon. If you do not have the tool to screw it in, you can…
Printed it as follows on my MK4S: .15 mm layers Supports activated .4 mm nozzle PETG 3 perimeters Because of the supports you need, you may have to smoothen the surfaces with a deburring tool or sand paper for a proper sliding behavior.
Available in ratchet standard sizes 1/4", 1/2" and 3/8". PETG .4 nozzle .2 layers organic supports Happy printing - would be awesame if you'd let me know what you think!
I printed these with the 0.2 mm Balanced profile in Prusa Slicer with Elegoo Reapid PLA+ white with 2 perimeters at 15 % infill with no supports in the given orientation Just use a bit of super glue to attach them to the goggles. By the…
I’ve included a project file where all necessary modifiers are already set, saving you a significant amount of filament. Additionally, I added a height range modifier that optimizes the print by using a .28 mm layer height for the pillar…
Added a tear-off aid, that helps tearing of the next trashbag! Would really apreciate, if you'd leave a make and a like! I printed it with the following parameters: PETG .4 nozzle .2 layer height 100 % infill MK4 Update Dec' 2024: Just…
PETG .4 nozzle .2 layers no supports Happy printing - would be awesame if you'd let me know what you think!
This holder stores three SodaStream Crystal 2.0 bottles along with their lids. It features a rail system that securely mounts to the wall, allowing the three hangers to slide on effortlessly. Two Versions Available: With Stopper: Extended…
A clean and minimal holder designed specifically for the WMF MINI salt and pepper grinders. It keeps both mills securely in place while adding a modern, structured look to your kitchen or dining table. The integrated handle allows easy…
Just a 9° add-on for my original wedge, including holes to add a stabilizing ribbon.
To wszystkie aktualnie dostępne wyniki.
