Liczymy pasujące modele…
These are a pair of small/large peg board baskets. They can be printed upright with tree supports for the best outcome. You can support me here: https://ko-fi.com/aerosteveo
This is a pegboard hook for thread spools. Note, these are a tight fit for wooden peg boards to make sure they're stable in the board, which may make them too tight for a metal peg board, print a test unit out before batch printing in…
This is a modified scalemail that i've been working on as i found many of them don't allow you to build larger sheets than a single buildplate. The scales nest together and then the bottom H components can just be tied together with…
This is a small clip to hold an LED strip to the wall with a screw rather than the double stick tape that comes pre-installed on them. This should be printed vertically on the buildplate with support. This has a wider mouth and opening to…
This is a quick spudger design I threw together for a specific need in my house. It is ¼" wide for the main portion of the unit, with a ½" wide base for a small period. its got a tapered edge for scraping or pressing.
This is a portrait orientation HD8 tablet wall mount. This was designed to be used for a home assistant / wallpanel display and have it wall mounted in a common location for interacting with. I printed this in the vertical orientation…
This is a small slat cutout that can be used in a 5x7 frame (it is 178mm across, so it will fit in any frame with that internal dimension) and glues in place. Simply remove all glass/backings/etc from the frame, mount this in place, and…
This is a custom designed dog poop bag holder that also has a lid for holding training treats. There is also an included basic lid that does not have the treat stash. The treat lid snaps together from two pieces, and then both lid types…
This clip can be used to mount an LED strip to a surface as well as holding the power wiring for power injection. This is useful to avoid relying on the double sided tape on the back of many strips (which is often not quite enough). This…
This is a case for an ESP32-A1S Audio Kit dev board, for custom built audio devices running esphome, squeezelite, snapcast, or other firmwares. This has a logo embedded in it for two color printing.
This is a stand to hold onto the novelkey big switch mechanical keyboard switches. This lets you click them without worrying about the pins getting bent on the bottom
This is a simple pedal stopper to prevent sewing machines like jukis from cutting the thread when pushing the pedal backwards. This can be printed at low infill and fits around the feet of the pedal at the back of it.
This is a case for an ESP32 A1S audio kit + a pair of 3W speakers. This can be flashed with squeezelite-esp32 for a squeezelite streaming music player, pair that with Music Assistant/Home Assistant and you have a fully open source…
This is a part of the EspDeck project, the casing for the ESP8266 Device and keys. https://github.com/AeroSteveO/EspDeck Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: No Infill: 40% Filament:…
This is a roku remote holder that clips onto an exercise bike handlebar frame (28mm diameter tube frame). It can be printed without supports (I printed it in PLA though I know its not always the best for clip based designs, pick your…
This was made for my wife to use receipt paper for foundation paper piecing with her sewing. She would keep the spool near her sewing machine and would unwind it as she went adding more fabric to what she was creating.
This is a peg board mount for a solder sucker. It is held at an angle to provide some clearance for items above it. It can be printed upright with tree supports for best outcome.
This is a mesh for the bottom of a plant pot in order to allow water to drain properly without taking the soil out with it.
I made a number of soap scoop models for a trade a few years ago. I haven't done anything with the models since, so here they are now available. They all have a 2.95" outer diameter to fit in a PVC pipe for pulling through the soap and…
Hardware Needed: ESP8266 / NodeMCU 2 x 300 ohm resistors 2 x Common Cathode RGB LED 2 x Novelkeys The Big Switch 3 x Pairs of 3-pin JST connectors 4 Rubber Feet Print with low infill, supports on for the main enclosure. Further notes on…
From the Source Models: A few parts for making a replica of the revolver from Bioshock 1. These are designed to attach to a toy revolver to give it either or both of the upgrades from the game. The collection includes normal, hollowpoint,…
This is just a little drive bot for testing things out with. This little bot also has a slot in the back that a rope or similar tail can be tied onto to entice a cat to chase it (assuming the cat is interested) Purchased Parts Repeat…
This allows you to mount the JetKVM ATX control board in a computer lacking PCIE slots. It does this by mounting the board to a HDD sled that can then be used in things like mini NAS units. Parts M2H4 Heat Set Inserts M3x4 Screws
These are small LEGO brick style PC knobs. They come in knurled and smooth versions and should fit common rotary encoder sizes for keyboards, macro pads, and other interface devices. Print them with tree-supports on the bottom to support…
This is a little project to adapt an old bluetooth speaker to an ESP32 A1S. The speaker control board had died and I wanted to make use of the speaker itself with a new ESP32 A1S board to drive it.
This is an adapter for the catomater that supports 12mm laser diodes. It is glued in place to the adapter bracket for the original diode. It slots slightly into the hole there for positioning. I printed it upsidedown with supports and…
This is a basement for my NFC Deck keypad to hold the NFC cards close to it that are used. This can be for an NFC powered movie or music system, or any other use of the NFC tags in Home Assistant automations. It should be printed…
This is a simple organizer for my cat litter bag rolls for the litter robot 4. The rolls i use are these: https://amzn.to/4dMvKoC
Sew lights are great for having good light while hand sewing, but if your other half is on the couch with you and holding their arm in an odd position to keep the glare out of their eyes, this may be for you.
This is a set of snowboard base/side edge bevel gauges. I saw the tools online for sale and thought “i can model something up for that” as i was unsure what the bevel angles were for my board from the factory. This should aid in that, for…
This is a set of holders fo coffee cup lids that can be mounted on cabinet doors. This can be done by screwing them to the door, or just using command strips.
Designed to work with command strips or wood screws.
This is a simple peg board holder for the new nintendo 3ds (not the XL model).
A simple belt hanger, can be mounted with command strips or screws.
This is a simple peg board holder for the anbernic RG35XX H retro handheld console. I made it to also work alongside the grip here: https://www.printables.com/model/1209522-anbernic-rg35xx-h-xbox-style-grip
To wszystkie aktualnie dostępne wyniki.
