Liczymy pasujące modele…
Intro This is a fun little collapsible telescope. I built this mainly as a way of playing with optics and having some fun along the way. It does work, and in my (very rough) testing it's similar to 4x25 binoculars, but with a narrower…
***Important note*** Print with ABS (or probably PETG would work too) . Because this part will get hot during use, the material must withstand higher temperatures. Print settings 0.2mm layer height 0.6mm nozzle Print with brim to help…
Print settings 0.4mm nozzle (0.6mm may work) 0.28mm layer height Gradual infill (but it shouldn't matter, really) No supports Description Some cheaper red dot finders have the dovetail shape attached to the telescope itself (e.g. this guy…
Print settings 0.6mm nozzle 0.32mm layer height 20% infill (but it probably doesn't matter too much) A test model is included so you can test that your hardware fits and that your printer settings are working, but this worked fine on my…
Design The walls are all continuous and curved with no sharp corners. This minimizes the amount of stopping the printer has to do so acceleration isn't a big issue. Because of this you should be able to print at a higher print speed than…
Description A modified version of the knob Maff published with the Hadley telescope. This one takes is sized for an M4 nut and screw, and also has a slot to slide the nut in after printing. Print settings 0.6mm nozzle 0.2mm layer height…
Update I have a newer model which solves an issue with the screws pushing on the mirror: https://www.printables.com/model/289164-m4-primary-mirror-cell-for-hadley-w-keyhole-slots Description I couldn't find an M4 version of the primary…
Push Up Duck I have no artistic abilities whatsoever, but really wanted a rubber duck doing pushups. I got Gemini to create a picture, then used Meshy to create a model. I wanted this mostly for a Push Up Challenge I was doing as part of…
This part broke on my microwave and a replacement is about ~$60 here in Canada (slightly cheaper if if I order it from the US). I decided I would print my own, and hopefully others can use this as well. My microwave is a KCMS1555RSS but…
To wszystkie aktualnie dostępne wyniki.
