Liczymy pasujące modele…
Print in TPU. Simple solution to cover both ends of an 18650, when carrying it loose in a backpack/toolkit to prevent from shorting on metal objects. Very lightweight, uses only about 2g of TPU per print. You can carry multiple caps with…
Simple hole model to test dimensional accuracy, both outside and inside.
Print with small nozzle to retain as much detail as possible. Category: 2D Art
Standoff spacing is 21mm. Standoff height is 28mm if your frame is not the nazgul and you want to match it. This mount was meant to reduce vibrations caused by the antenna, so I printed mine with PETG. It is very stiff and doesn't flex,…
Game of Thrones logo stencil. I had to remove the vertical lines inside O's, because there was no way to support them and keep it single piece. They should be easy enough to be painted separately. To ensure the paint doesnt leak through…
Protects the O3 Camera from bottom impact on the GEPRC Domain 3.6 frame. Print in TPU. Requires longer than the original M2 screws to mount the bumper. I used extra screws, but you can try to swap with the rear top plate screws, which are…
Update 2: During a 3 hour print the temperature of air coming out of the PSU with cover mounted reached 30 deg C while room temp was about 23 deg. Printing without cover the temperature was about 1-1,5 deg C lower, but this may be simply…
Source One v5 SMA connector mount (19mm)
Print in TPU . The camera cutout is 13.8mm in diameter and about 4.5mm deep. Fits Caddx Nebula Pro, and other cameras that use 14mm lens. The glass portion is made from an microscope slide. You can buy those pretty cheap, they usually…
To wszystkie aktualnie dostępne wyniki.
