Liczymy pasujące modele…
NOTE. YOU WILL NEED TO ROUTE THE PROVIDED QIDI BOX PTFE TUBING THROUGH THE HOLE NEXT TO THE RUBBER WHERE IT WAS PREVIOUSLY ROUTED PRIOR TO INSTALLATION, I HAVE BEEN USING IT THIS WAY FOR A MONTH OR SO NOW WITH NO ISSUES. A simple…
I WOULD HEAVILY RECOMMEND TO PRINT IN ASA or ABS IF YOU HAVE ACCESS, PETG AND PLA MAY GET BRITTLE OR DEGRADE OVER A SEASON OR TWO HOWEVER YOUR MILAGE MAY VARY. USE DARKER COLORS OR PAINT FOR BEST UV RESISTANCE. I have not tested these in…
A large pull handle to replace the factory one (or another printed one). Uses the factory screws to attach the stock handle. Printed in PETG since its all I had in silver but i'm sure most filaments outside of PLA will be fine (and even…
wanted my RMR to sit as far back as possible but couldnt find a model that mounted it that way. made 2 different variations, mainly due to my middle screw on the top of my mk4 becoming stripped. May need to scale up or down a few percent…
Raptor like ambi charging handle for the ruger mk4 (and possibly other models). Should pop right onto the end of the bolt by flexing it apart. There is a spot for a heat insert and a screw if you have issues with it being loose or want it…
A simple extension/converter for an exhaust system for the Qidi Q2. Requires the usage of 2 hose clamps to clamp down, one for the printer side and one for the hose side. I recommend printing in PETG or better so you don't end up melting…
A simple MP5 wall mount since I couldn't find one available for free. Best printed in the orientation it imports in with supports (on its side). I RECCOMEND YOU PRINT IN A LOW CREEP MATERIAL LIKE ABS (I PRINTED IN ASA-CF) YMMV IF YOU USE…
A simple extended/larger door handle for the Qidi Q2. Found that the stock one was a bit shallow and difficult to get a good purchase on so I threw this together in cad real quick. Reuses factory screws to attach to door. If you'd like a…
Made to replace the original ball on my CZ457. Have 2 designs included; preferred the beehive style pictured due to the other having some slightly sharp edges however that might be your preference.
####UPDATED 12/3/24#### -Added screw holes to screw through the fit boards into place -Improved fitment around interlocking areas -smoothed some geometries to improve strength and aesthetics. NEEDED ITEMS -5/8-in x 5-1/2-in x 6-ft Picket…
Samsung Note 20 Ultra Rude Flip off case with moving middle finger
A simple press mold to shape and form circular ¾ stainless mesh filters into a common 14mm bowl. Simply center the filter in the press as much as you can, press down, and remove the filter from the mold (may need tweezers can be difficult…
Wanted something better to replace my 1 gallon bags i've been growing in that would allow easier LST without poking holes in the bags. I have printed these in PLA, PLA+, and PETG so far and all 3 do well without supports albeit the PETG…
An attachment to convert a generic tablet/phone holder to hold onto a dbrand killswitch case. Comes in 2 pieces for easier printing and durability. Uses a single ¼ nut and a ¼ x ¾ bolt to attach the two pieces. This should fit in most…
A simple end cap for the zenitco RK-4 foregrip. Wanted something to color match my two tone build as well as remove the russian from the gun. Old gasket is reusable and the cap is dimensionally similar to the original. Printed in PC-PETG…
To wszystkie aktualnie dostępne wyniki.
