P
PrintablesBuilt_Over_Bot
Rose
a rose you can print for your desk
- Pobrania
- 2182
- Polubienia
- 179
- Ocena
- 4,69
Wszystkie modele
Liczymy pasujące modele…
P
PrintablesBuilt_Over_Bot
Duck Valve Stem Cap
Please note that our files are free for personal printing use. If you are commercially printing any of our files, you must be a club member.
- Pobrania
- 1515
- Polubienia
- 211
- Ocena
- 4,69
P
PrintablesBuilt_Over_Bot
Desk Flowers
We decided we wanted some more desk flowers in our collection. There are two versions with one have having more pointed petals and the other has more rounded petals. No supports should be needed for this file. We used 15% gyroid infill…
- Pobrania
- 1096
- Polubienia
- 151
- Ocena
- 5
P
PrintablesBuilt_Over_Bot
Rhinoceros Needs a Hug
You too can have a little rhino that needs a hug! This file is free for personal printing use. Join our club to get rights to print commercial while being an active member! We have lots of cute little creatures and more are on the way!…
- Pobrania
- 768
- Polubienia
- 216
- Ocena
- 5
P
PrintablesBuilt_Over_Bot
New Years Bunnies as it is the year of the Water Rabbit
Print this and put it on your desk in honor of the year of the Water Rabbit! Or as we like to call it…. the Wet Bunny! We have several different bunnies available depending on your mood. Basic bunny is the cute typical bunny. Check out…
- Pobrania
- 451
- Polubienia
- 47
- Ocena
- 5
P
PrintablesBuilt_Over_Bot
Beskar Rose
Easy to print no supports designed as a cake topper for a star wars fan.
- Pobrania
- 420
- Polubienia
- 48
- Ocena
- 4,67
P
PrintablesBuilt_Over_Bot
Reindeer
Our small Reindeer we made into a christmas ornament. Prints with no supports.
- Pobrania
- 381
- Polubienia
- 71
- Ocena
- 5
P
PrintablesBuilt_Over_Bot
A Hippopotamus for Christmas
You too can have a Hippopotamus for Christmas after you print this ornament. No support needed for this easy fast print
- Pobrania
- 365
- Polubienia
- 109
- Ocena
- 5
P
PrintablesBuilt_Over_Bot
Polar Bears Need Hugs Too!
We found another animal that is looking for a hug! We have two different version of the file included for download. The first is just a polar bear and the second is a polar bear that has a hat and a scarf. This file can be printed .2…
- Pobrania
- 278
- Polubienia
- 50
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Printer Blob
We introduce the printable version of the Printer Blob. Scarier than the spaghetti monsters that lurk out there and hopefully more rare, this little one can be added to your collection of horrifying prints or cute prints if your prefer.…
- Pobrania
- 245
- Polubienia
- 44
- Ocena
- 5
P
PrintablesBuilt_Over_Bot
Annoying Christmas Tree Gift Box
We designed an annoying gift box that is attractive enough to use as Christmas decorations after you give it. We even have a version that you can make the bulbs light up with led fairy lights. You will need to be a member of our thangs…
- Pobrania
- 202
- Polubienia
- 51
- Ocena
- 5
P
PrintablesBuilt_Over_Bot
Sitting Hippo Ornament
Everyone needs a hippo for Christmas and it should be an ornament! We have included a bead file that allows you to attach a string that can go through the body and make a hanger.
- Pobrania
- 119
- Polubienia
- 27
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Clown Buddy
Inspired by many different modern killer clowns, we are not sure you should trust it with sharp object.... or for that matter any object. You made need to resize this if you are going to use it for a larger pen. Well we warned you if you…
- Pobrania
- 107
- Polubienia
- 19
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Swirl Tree
Easy to print tree that is great with dual colors
- Pobrania
- 106
- Polubienia
- 15
- Ocena
- 5
P
PrintablesBuilt_Over_Bot
Castle Container
This container to go along with our bunny series
- Pobrania
- 97
- Polubienia
- 34
- Ocena
- 5
P
PrintablesBuilt_Over_Bot
Cauldron Purse
The top of the cauldron can either have a bubble top or a cauldron lid. These lids attach to the cauldron by magnets that will be needed to put in during the printing process. Don't forget to make sure your magnets are placed in each of…
- Pobrania
- 85
- Polubienia
- 53
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Zombies Just Want Hugs
Maybe zombies would not be so scary if we just gave them a hug. Print this zombie to remind you that everyone needs a hug. Well at least those that don't bite.
- Pobrania
- 70
- Polubienia
- 23
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Cauldron Tea Light
You will need a battery operated tea light to do this project. There are several ways that you can display the tea light with this print. The first way is to put the tea light in the cauldron. If you print the bubbles out of a transparent…
- Pobrania
- 60
- Polubienia
- 10
- Ocena
- 5
P
PrintablesBuilt_Over_Bot
Sitting Moose Ornament
We have included a bead file that allows you to attach a string that can go through the body and make a hanger.
- Pobrania
- 53
- Polubienia
- 21
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Slime Blob - A Gift Set
Slime Blob Container is two pieces that includes the top or main slime blob and the bottom insert. We have included files to allow the eyes and main container to be printed separate (see container with no eyes and eyes for container).…
- Pobrania
- 52
- Polubienia
- 13
- Ocena
- 5
P
PrintablesBuilt_Over_Bot
Porch T-Rex
In response to all the Porch Geese out there, we decided to release the Porch T-Rex! Please note that we are not responsible for any missing geese, gnomes, or other creatures! This T-Rex is split into parts and does not need to be printed…
- Pobrania
- 33
- Polubienia
- 5
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Mini Pumpkin Lanterns
These little pumpkins can be used several different ways. First, we created a bottom base for the pumpkins that a magnet can be added during printing process. This will allow the pumpkins to be added to our Porch T-Rex or other surface a…
- Pobrania
- 33
- Polubienia
- 4
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Cauldron Humidifier
This is a 3 part print that consist of the Cauldron Base, Mid-Plate, and Top Bubble Plate. These parts will allow you to have a decorative humidifier by adding ultrasonic humidifier to the prints. Check out our video to see the assembly.…
- Pobrania
- 32
- Polubienia
- 11
- Ocena
- 5
P
PrintablesBuilt_Over_Bot
Highland Cow Christmas Ornament
Decorate your tree with this little highland cow that has a Christmas Hat on. We have included both the regular .stl and painted .3mf. We recommend using 15% gyroid infill.
- Pobrania
- 24
- Polubienia
- 13
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Grinch Poo Gift Card Holder
Designed for the person that has to have everything “Grinch.” Or maybe it is for the Grinch that is in your life. This model prints with with a ring around the poo that once done printing will need to be cut away. Then you will need to…
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Feelin' Witchy Cauldron Ice Cream Holder
This ice cream holder was created to hold most pint size ice cream containers. Shaped like a a cauldron, it can be used as decor when not being used as a container for ice cream. The side handles are wide enough to fit your thumb in to…
- Pobrania
- 10
- Polubienia
- 4
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Wedges for Crappy Gift Card Holder
These are the Wedges for the Crappy Gift Card Holders or The Grinch Poo. You can decide on which one you prefer for your gift card holder. To save on printing we made it where these can be done with a single filament change at layer 17.
- Pobrania
- 4
- Polubienia
- 2
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Canadian Flag Soda Can Cover
This model is a soda can cover that can be used to lift the tab on the can, act as decor to your can, or cover the soda can opening. This file will need supports. We also added a hole so that you can add keychain ring or jump ring to take…
- Pobrania
- 4
- Polubienia
- 2
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Skull with Eyeballs Bin
We printed ours with .2 layer height and 10% infill.
- Polubienia
- 0
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
JimmyCorn - "The Jimmy Rig" Unicorn
The legs will rotate down and with the help of the tail, the unicorn will stand. This is a cute and fun Halloween print. We don't recommend anything smaller than 60% of the original size.
- Polubienia
- 3
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
JimmyCorn - "The Jimmy Rig" Unicorn Keychain
The legs will rotate down and with the help of the tail, the unicorn will stand. This is the keychain version. This is a cute and fun Halloween print. We don't recommend anything smaller than 60% of the original size.
- Polubienia
- 3
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
T-Rex Costume Fidget
The legs will rotate down and with the help of the tail, the T-rex will stand. This is a cute and fun Halloween print. We don't recommend anything smaller than 60% of the original size.
- Polubienia
- 9
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
T-Rex Costume Fidget Keychain
The legs will rotate down and with the help of the tail, the T-rex will stand. This is a cute and fun Halloween print. We don't recommend anything smaller than 60% of the original size.
- Polubienia
- 7
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Humpback Whale
Easy to print fidget! We have included a painted .3mf version and regular stl file. We printed ours at a .2 layer height but you can always use smaller layer lines.
- Polubienia
- 6
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Capybara
This will print better with smaller layer lines. Included is the painted .3mf file.
- Polubienia
- 9
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Chibi Narwhal
Will print better with .16 or small layer lines. Included is the regular .stl and painted 3mf
- Polubienia
- 4
- Ocena
- 5
P
PrintablesBuilt_Over_Bot
Chibi Narwhal Keychain
Will print better with .16 or small layer lines. Included is the regular .stl and painted 3mf
- Polubienia
- 2
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Hedgehog V2
Second version of our hedgehog with another joint
- Polubienia
- 5
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Sliding Penguin V2
Can be printed with .2 layer lines. Include is both the regular .stl and painted .3mf.
- Polubienia
- 4
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Beehive Egg
There are several different version of our beehive eggs! Our First Beehive has no extra holes for magnets. This way the file can be easily sized up or down. The beehive with "TopMagHole" has only a single magnet hole located on the top…
- Polubienia
- 4
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
DragonFly
We have three version of the dragonfly with different wing options. The first is a solid wing which has no design in the wing. The second is a open wing that has a pattern cut through the wing. The last version designated as "half wing"…
- Polubienia
- 16
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
DragonFly Keychain
We have three version of the dragonfly with different wing options. The first is a solid wing which has no design in the wing. The second is a open wing that has a pattern cut through the wing. The last version designated as "half wing"…
- Polubienia
- 6
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Killer Whale Fidget
Killer Whales or Orcas are the largest species of dolphin. Get your own fidget version of this amazing creature!
- Polubienia
- 12
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Killer Whale Keychain
Keychain version of our Killer Whale Fidget
- Polubienia
- 14
- Ocena
- 5
P
PrintablesBuilt_Over_Bot
Cardinal Fidget
This cardinal has wings and legs that can move!
- Polubienia
- 6
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Cardinal Fidget Keychain
This cardinal has wings and legs that can move!
- Polubienia
- 9
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Brontosaurus Fidgets
We gave added two different version of our brontosaurus fidgets!
- Polubienia
- 133
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Brontosaurus Fidget Keychains
We gave added two different version of our brontosaurus fidget keychains
- Polubienia
- 10
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Burt The Frog - Sticking Out Tongue
No supports should be needed. You will need to print it with 15% infill and gyroid to get a clean print.
- Polubienia
- 0
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Burt the Frog - No Tongue
The photo shown is the file printed at 180%. No supports should be needed. You will need to print it with 15% infill and gyroid to get a clean print.
- Polubienia
- 0
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Burt the Frog - Earrings No Tongue
These versions of Burt do not have tongues. Version one has hole that allows a jump ring to be added. Version two and three both have holes that go through the body. This will allow you to add a small bead to the inside of the mouth by…
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Brontosaurus Earrings
We made the the tail solid for easier printing and they are roughly 50 percent smaller than our fidget/keychain versions. Version one has the hole for earrings further back allow the earrings to have a slight leaning forward to the dino…
- Polubienia
- 8
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Cardinal Earrings
We removed the legs from our Cardinal and resized to make it into earrings easier. Version One has the hole for a jump ring in the head and version 2 has the hole in the back to make it look like they are flying. **Please note that these…
- Polubienia
- 7
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Duck Fidget Keychain
Included is both the regular .stl and painted 3mf. It is recomended to print these with .2 layer height or smaller and gyroid infill. Please make sure that you have good bed adhesion in order to print these!
- Polubienia
- 7
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Duck Earrings
These files should be printed with .12 or smaller layer lines and gyroid infill. Please make sure that you have good adhesion to your print bed.
- Polubienia
- 16
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Creepy Eyeball Fidget
You can either fidget with the "strands' or you can make the eye rotate around. To make this fidget complete you will need to print a top, bottom and an eye. The top piece will screw on to the bottom but don't forget to put the eye in the…
- Polubienia
- 3
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Turkey Sit or Stand V2
We recommend printing this no smaller than 80% of the original size due to the leg but can be printed as large as you like. Print this file at 15% gyroid infill.
- Polubienia
- 6
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Turkey Earrings
Included is the regular .stl and painted .3mf. We recommend using .12 or smaller layer lines and gyroid infill. No Supports and no brim unless you have problems with your prints sticking to the bed.
- Polubienia
- 4
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Sloth Ring Holder Version A
This model does not need any supports and we printed ours with 15% gyroid infill. Included is the regular .stl and painted .3mf.
- Polubienia
- 2
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Sloth Ring Holder Version B
This model does not need any supports and we printed ours with 15% gyroid infill. Included is the regular .stl and painted .3mf.
- Polubienia
- 5
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Fire Horse Fidget
We recommend printing this with 15% gyroid infill. We have included both the regular .stl and painted .3mf.
- Polubienia
- 9
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Fire Horse Keychain
We recommend printing this with 15% gyroid infill. We have included both the regular .stl and painted .3mf.
- Polubienia
- 4
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Knit Drink Holder - Short Standard
We decided to design a Drink Holder that will hold 12 ounce standard soda cans. We created two version with one one that has a handle and one that is a koozie style that does not have a handle. Each version has a .stl and a painted .3mf…
- Polubienia
- 15
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Loon Fidgets
We designed two version of our Loons with one having wings out and the other with the wings to the side. They also have feet that are jointed. Included are the painted .3mf and regular .stl. We recommend printing these with at least .2…
- Polubienia
- 15
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Husky Fidget
Included is both the .stl and painted .3mf. This file should be printed with 15% gyroid infill
- Polubienia
- 3
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Husky Fidget Keychain
Included is both the .stl and painted .3mf. This file should be printed with 15% gyroid infill
- Polubienia
- 5
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Sit or Stand Silkie Chickens
We decided to add a silkie version of our sit or stand chicken! Included is the regular .stl and painted .3mf. We recommend printing this with 15% gyroid infill.
- Polubienia
- 0
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Pigeon Sit or Stand
We recommend printing this with 15% gyroid infill. Included is both the regular .stl and painted .3mf file.
- Polubienia
- 0
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Pigeon Fidget
We recommend printing this with 15% gyroid infill. Included is both the regular .stl and painted .3mf file.
- Polubienia
- 0
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Pigeon Fidget Keychains
We have added two version of the keychain with one having a hole through the head and the other version with a hole through the back to add a jump-ring or keychain. We recommend printing this with 15% gyroid infill. Included is both the…
- Polubienia
- 2
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Frog MakerChip Holder
This file was created to hold a MakerChip on the tongue of the Frog. This can be used to hold challenge coins. We recommend printing this with 15% gyroid infill. Included is both the regular .stl and painted .3mf. This file was created…
- Polubienia
- 0
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
George the Pig Tongue Out
This cute little bit is to celebrate George the Pig! This file should be printed .2 layer height and 15% gyroid infill. Included is both the regular .stl and painted .3mf.
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
George The Pig MakerChip Holder
We recommend printing this with 15% gyroid infill. Included is both the regular .stl and painted .3mf. This file was created for personal printing use only unless you are an active commercial paying member.
- Polubienia
- 0
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Cat Tongue Out
We recommend printing this with .2 layer height and 15% gyroid infill. Included is the regular .stl and painted .3mf.
- Polubienia
- 0
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Cat MakerChip Holder
This cat was created to hold a MakerChip or Challenge Coin. We recommend printing this with .2 layer height and 15% gyroid infill. Included is the regular .stl and painted .3mf. This file was created for personal printing use only unless…
- Polubienia
- 0
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Dino Tongue Out
We decided to add a Dino to our "sticking its tongue out" series! Printing Recommendation: .2 layer Height ,15% gyroid Infill, No Supports
- Polubienia
- 0
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Dino MakerChip Holder
This is the MakerChip Holder version! A MakerChip can be placed on the tongue of the Dino. This can also hold a small sign! Printing Recommendation: .2 layer Height, 15% gyroid Infill, No Supports
- Polubienia
- 0
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Ice Skating Caroler or Snowman?
This profile is a husband wife combo, Sandy designed this as a snowman. I think it is more of a caroler you decide and let us know who is correct. The skater sits and stands but like most ice skaters it sits easier then it stands. However…
- Polubienia
- 3
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
A Velociraptor that holds a sign
A Dino to make a party favor out of. It will hold suckers and we have included a sign holder where you can make a paper sign.
- Polubienia
- 39
- Ocena
- 5
P
PrintablesBuilt_Over_Bot
Bearded Dragon
Easy to print Bearded Dragon with movable head.
- Polubienia
- 32
- Ocena
- 5
P
PrintablesBuilt_Over_Bot
Bearded Dragon Keychain
Easy to print keychain with a joint between the head and body.
- Polubienia
- 17
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Hairy Spider Keychains
We have two keychain files - one with a hole in the front of the spider and the other has hole in the back of the spider
- Polubienia
- 8
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Turkey Sits and Stands
We print this one at the current size without any supports. If you size it up, you may need supports!
- Polubienia
- 7
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Cardinal
Two files are included - one with a hole for a keychain and one without a hole.
- Polubienia
- 8
- Ocena
- 0
P
PrintablesBuilt_Over_Bot
Raccoon
Easy to print raccoon with a joint between the head and the body
- Polubienia
- 8
- Ocena
- 5
P
PrintablesBuilt_Over_Bot
Gyro Tree - Peek a Meow
Easy to print gyro that can be used as a fidget or a ornament
- Polubienia
- 0
- Ocena
- 0
