Liczymy pasujące modele…
Doors! I've been working on this for a while, trying to come up with something that would keep a door in place nicely but would also leave room for all the models to stand in the door once removed. Same door fits both bottoms. Print door…
Just a simple set of eight Jersey barriers, four damaged, for use in urban/scifi gaming. 12/26/2015: I've split the model up into a set of four damaged barriers and a single of the undamaged model, in case that's helpful (see comments).…
This is a remix of Henrik Bjorkman's excellent "simplified tiger tank" ( http://www.thingiverse.com/thing:90265 ), reduced in scale and adjusted here and there for use in the Memoir '44 board game. As I think Henrik does, I print these…
A pair of similar but distinct oil drum barricades for use in urban/scifi gaming. Category: Toy & Game Accessories
Following along the path I started with the wood panel tiles , these are "flat" walls based off components from Devon Jones , in particular the bits from his ruined walls . Thanks so much Devon for providing all these bits! I'm modeling…
I had been wanting some desert-themed scatter terrain pieces, Bryce Canyon sort of stuff, but I couldn't figure out how to model it well. So, I built some pieces using PVC foam, cork board, drywall spackle, and some grit, following…
I've always liked the craters I've seen on 40K tables, but I'm cheap and didn't want to buy a set. I took TPSully's crater lake block and turned it into a piece of scatter terrain. Note: I've scaled this so that it will just fit on an R2X…
This is a set of Roman columns for use in 28mm gaming, such as Arena Rex . My contributions are to resize for 28mm gaming, to create the deformed versions, and to split the column into a hollow base and separate top. Original design is…
Continuing on the Gloomhaven thread. One corner, so far, generated from Devon's curved walls. I have some ideas for more hexagonal ones, but time... I'll continue to add to this collection as I generate more bits. Updates: 10/09/2019 -…
I actually put this model together some time ago, but because I'm playing mostly MERCS at the moment, and it is a little fiddly to use for MERCS because of the card-based movement, I sort of forgot about the model. The model consists of…
Another terrain piece for the modern/sci-fi wargaming table. Might make a nice objective. I've been wanting to take one of my bombed-out buildings and make it more visually interesting, so I grabbed onebitpixel's crate and Forpost_D6's…
This is a set of four buildings for use in 28mm urban/scifi gaming. One nice feature of the set is that they come apart and nest, so it's reasonably easy to pack them up. The first building is a two story, heavily damaged building with a…
This is a customizable holder for keeping wrapping paper from uncurling when in storage. It's a mashup of the fine wrapping paper holder from Corey Brown ( http://www.thingiverse.com/thing:36166 ) and the Partial Rotate Extrude SCAD from…
This is a second set of nesting urban buildings for 28mm gaming. This set adds some exposed cinderblocks and a two story building with most of the first floor intact, providing more opportunities for ground level cover than with the other…
I designed this as a way to provide some complete cover along the back lines for MERCS, but it could be used in just about any urban/sci-fi miniatures gaming. Instructions OpenSCAD for the majority of the model, plus Blender to finish…
This is a Tie Fighter model scaled for casual use in the X-Wing miniatures game, for example if you want to experiment with Tie swarm battles. This model is a derivative of this Sketchup model:…
Inspired by a few different projects to develop post-apocalyptic building terrain, and the many rulesets for that sort of thing, I've been hacking on OpenSCAD to generate appropriately improvised shacks. 6/7/2016: Printed wall-1b and…
Outpost 6 is a building for use in 28mm wargaming. It was inspired in part by the great terrain examples shown on the Maelstrom's Edge web site . Dan Newman's Inkscape to OpenSCAD converter and Greg Frost's bevel extrude were both used in…
This is a replacement forest tile for use in the game Memoir '44. Two versions are included, for variety. The design is inspired by JAWong's 3D Catan pieces (but designed from scratch). I've included the OpenSCAD for this as well. It's a…
Bremer wall a.k.a. Alaska barrier (or Texas barrier, depending on what scale you print). 5/24/2016: Added top of one of the broken barriers. Reorganized the barriers into a more "packed" format for printing. Category: Toy & Game Accessories
Continuing on the Gloomhaven thread. This one is a quick cut, and has a different license than most of my bits due to its provenance. Updates: 08/09/2018 - Repaired the two DutchMogul-derived pillars, which were not slicing well in…
Standard size ship base for the X-Wing miniature tabletop game. This one is done in OpenSCAD, with source included in case you need/want to customize or adjust for your printer. I can't tell if it is my printer or an artifact of ABS…
This is (the start of) my take on remixing Devon Jones's classic dungeon stone tiles into the True Tiles / Wyloch format (tops only). Just an experiment at the moment. These seem to be the most important properties: 1mm thick base for top…
This model is a combination of my Jersey Barriers and Oil Drums, modified to use DungeonSticks connectors, and scaled to 85%. The oil drums are further modified to accept 6x2mm cylindrical magnets, which I happened to have lying around.…
This is a simple storage tank design sized for use in 28mm gaming. Marine not included :). Instructions The STL is broken into two parts for easy printing with a minimum of material. I printed with 0.3mm lower layers and 0.15mm upper…
This is a simple storage tank design sized for use in 28mm gaming. It's a derivative of my other storage tank design, more narrow (80mm diameter instead of 100mm) and with a flat top. While I find the rounded top more aesthetically…
This model is a derivative of Kolo33's Tie Interceptor (thanks for the great starting point!). The main thing I have done to the model is to adjust the proportions to be more in line with models in the X-Wing game. I also recreated the…
This is a work-in-progress effort to create a set of scatter pieces representing a wrecked Thunderbolt. I've scaled up the model to what I think is about the right size for 28mm gaming, but as I don't have an original, I'd be happy to…
Some plates that appear on newest version of Thor's armor from movie series. Three sizes correspond to the three different sizes on the costume. Category: Costume
I had an opportunity to play a bunch of Gloomhaven recently, and I thought it was awesome. I've also been itching to make some 3D printable terrain, but without a specific goal, hadn't made a lot of progress. Then I saw this page from…
I had an opportunity to play a bunch of Gloomhaven recently, and I thought it was awesome. I've also been itching to make some 3D printable terrain, but without a specific goal, hadn't made a lot of progress. Then I saw this page from…
NOTE: I've stopped working on these in favor of a two-sided version that has cut stone on the bottom . I like Gloomhaven! This is a set of tiles for the game, modeled programmatically in Blender, to go with the Cut Stone/Dirt and Wood…
NOTE: At this point you are probably better off using this improved version of this thing. Create a customized maneuver dial for X-Wing, to replace a lost or damaged one or to try out a new ship design! When using, don't bother to change…
Two sided versions of the key tiles you need in cut/plank format. Sorry for the delay in posting... Category: Toy & Game Accessories
Here's a relatively simple Tie Phantom model sized for use in casual X-Wing games, to try out new strategies, etc. Obviously I encourage you to buy real models for this excellent game! All the Phantom models I could find were going to…
Huge, full-height bin made to fit a YT-1300 from the X-Wing game. The bin is slightly smaller at the bottom, unlike my half-height bins (and the Tie ones), because it seems to fit better this way. This bin is based off this container by…
JanSpiesZA's design ( https://www.thingiverse.com/thing:2508532 ) is awesome, except that our little pirate wouldn't fit in the cylindrical hole in this bin. Now he does. Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator…
These are just misc. bins to go along with the X-Wing specific bins that I've been putting together. Probably obvious, but they are useful for cards, asteroids, tokens, etc., and I find that the full-height (depth) bins aren't as space…
Small, full-height bins for holding a single Tie Advanced and one or two Tie Interceptors. The two Interceptor bin is tight; both have to be inserted or removed at the same time to fit, but it's a nice fit once they are in. I've included…
Half-height, medium-sized A- and E-Wing bins based off blanks from Kariko83 . I know, you're wondering why I bothered to make a bin to hold two E-Wings :). That's a reasonable question. Perhaps by Wave 10 they'll make some other E-Wing…
Large, half-height bin for the Jumpmaster. I'll admit, this is not perfect. Ideally the space under the nose would be brought up a bit to tilt the ship, but instead it basically pivots on the peg on the bottom of the ship. Fits fine, just…
TIE Defender double bin, medium size, for Harbor Freight organizers. This is part of my Harbor Freight X-Wing collection. Category: Toy & Game Accessories
Large, full-height bin to hold a Lambda shuttle. Palp can ride in style in your Harbor Freight organizer, now! This one was from scratch. This is part of my Harbor Freight X-Wing collection. Print Settings Rafts: No Supports: No Category:…
Large, full-height Harbor Freight bin especially for your YT-2400. This is probably my favorite bin so far, if that makes any sense. I've done my best to keep the amount of plastic used down, and the YT-2400 very nicely nestles into a bin…
Medium sized, full height bin for Harbor Freight organizer. Thanks to NerdMomma for her help in getting this one right! Category: Toy & Game Accessories
Large bin to hold a Decimator in a Harbor Freight organizer. The ship is angled in the bin to bring the front end up near the top of the bin, creating a point of contact other than the tiny, fragile gun on the back. It will still need a…
Large, half-height bin for a pair of U-Wings. This is part of my Harbor Freight X-Wing collection. I'd like to thank Matt a.k.a. ryanvito for his help in pulling this design together. How I Designed This Basically I sketch the outline on…
Replacement bin for Harbor Freight organizers, large size, half height (in case you have two of these guys...). I partitioned off a little space for storage; seemed silly to center the model in the middle and just waste the surrounding…
Customized version of http://www.thingiverse.com/thing:44906 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=44906 Instructions Using the following options: unit = 1 spool_hole_diameter = 18 spool_width =…
Print with no top/bottom and honeycomb infill for a nice look.
This design is intended to facilitate mounting a small USB camera (specifically a ELP-usb500w02m-l21) on a vertical surface, with a good degree of flexibility in orientation. I've specifically used this to mount one of these cameras (the…
To wszystkie aktualnie dostępne wyniki.
