Liczymy pasujące modele…
This model is for personal use only, not for comercial use! A pot for rinsing the nose, when anybody have the nose blocked. How can use it, find you in your pharmacy or in internet. I printed it from PLA, or better from PETG filament. In…
Balance pads are the little tools for the correct pactise of the feet. Thisis a stabilization aid for strengthening ankle and foot muscles. See you: https://www.rehabilitace-sport.cz/nestabilni-plochy/1379-propriofoot-balancni-plosky.html…
Víčko na plechovku 0,5l od piva proti hmyzu. “Vicko pivni plechovky volnejsi.stl” je na plechovce trosku volnější a lépe se opakovaně sundává.
This is a tool for the home services. This model is prepare for a heater vent repair. Size of the square inside is 5x5 mm. Printing: Is it better to print it from PETG or ABS in laying down positionto make the tool stronger. For the print…
Very easy key hanger on the wall. It is the best to print it standing with supports (see photo). Best filament material are PETG or ABS.
Winners podium for children at size 5 x 5 cm for every places. Winners podium base is printed as all in one. Winners podium frint is printed per partes, the under part is printed with white filamnent and the numbers are printed with red…
Car holder for drinks designed for Škoda Octavia, but all other cars. In holder is it possible to stay PET 0,75 l . For the best strength is it recomended print it from ABS with supports, infill about 70 percent.
Glasses box for a little glasses. Model is possible to print in place without supports. In the corners are the holes for insert magnets with diameter 10mm and thickness 2,7mm, to be able the box closed. Material: PETG
Krabička je složena z vlastního výklopného držáku vrtáků průměru 1-10 mm, spodního dílu krabičky, kde je místo pro uložení dalších drobností, třeba bitů a víčka krabičky. V držáku jsou díry záměrně větší o 0,6 mm, aby šlo vrtáky lehce…
Form for filled pastry is a simple tool in the kitchen. It is possible very simple to make the filled pastry. How use it - see the video by Zdeněk Čítek https://www.youtube.com/watch?v=yB3kf2yTThE . The model “formicka 1.stl” if any…
EN: This is a sprinkler for garden watering can diameter 34mm. This sprinkler can be screwed, it can be cleaned of dirt. Material: ABS or PETG Printing: with support (better are maybe tree supports) CZ: Jedná se o kropítko pro zahradní…
This easy peg model is possible to install on the wall, on the cabinet etc.
I make the rescue knife for cut the car belt. This knife use the firefighters when is it necessary cut the car safety belt. It is possible to use to any other reason. Knife is safety for children use, because the sharp part of the knife…
Bicycle holder Xiaomi Redmi 9C is a simply holder for mobile phone for mounting on handlebars of bicycle. Is it posiible insert in the holder the phone with a rubber cover. The holes in the holder are to be able the phone charge and…
EN: This is very friendly house to print. It composses from many parts. Model has a functional door, to be able to empty the money, if the house is full. Printing: I load here the *.3mf files, where are the models oriented for better…
EN: Funnel for filling fuel in a car - it has a diameter 24 mm like the gun of a gas station to go into the neck of the tank. An extension can be put on the funnel to make it long enough, but it can also be printed on a small printer. CZ:…
This knife is created as a modeler tool. This is a handle for a modelers razor blade. Is it necessary to print this model from ABS or ASA, that this model be a strong. Print you this model with the supports, in a possition as in the…
This is a snap-on radiator bracket for a towel. Print you it from PETG or ABS, that the bracket is strong.
My model is a spool with diameter 80mm for any strings. In a spool are many holes, that it use less of material during printing. You print it from random filament (as PLA, PETG, ABS etc.). You print each part independently, and after…
This model is a my prototype of cabinethandle. I printed it from PLA with support. After you printed it, must you insert into the holes the rived nuts with the interior perimeter M3. You must warm up the nuts and then you insert it in the…
Simple box for a Canasta cards. I printed it from PETG filament. External dimensions of a box are 95x65 mm.
This model is recomended for towel that are without eyelet. The towel is threaded through a narrow clasp and it is done. I print it with support from PETG material.
This model is tuning for the Kingroon KP3S printer. I changed the stock fan with a better fan 4010 24V, who is better cooling. The seconf fan, who is in front mounted, is original blower fan. Printing: all parts from PETG “conduit.stl” is…
EN: Since the manufacturer does not supply an ashtray or other compartment suitable for small waste (especially parking tickets) in new cars, I made my own. The bin can be placed in the left/right front door in the place designated for…
CZ: Magnetický držák mobilu do větrací mřížky automobilu. Do držáku je potřeba po vytištění vložit 5ks knoflíkových neodymových magnetů průměru 10 mm, tloušťky 2,6 mm. Na mobil nebo obal mobilu je potřeba nalepit plechový kovový plíšek.…
EN: I added the second holder for this model. Both holders are allocated on a simple wood plate, where they are bolted with the small screws. I'm rewinding on this holder the paper spool to a plastic spool. In my holder I used the a piece…
I remixed a “orange-pi-zero-2-with-expansion-board-case-remix” and I inserted any 4010 cooler fan cover to be able better an OPi cooling. An"OPi2 case.stl" is without modifications and is loaded from…
I made a simple bolt to attach interior upholstery to bodywork of Kia Ceed. The original bolt breaks when pulled out during repair your car. My bolt is a reimbursement of original. Filament: PETG, better ABS or ASA Supports: NO It is very…
Czech: Tento model je praktická pomůcka na odvíjení lepící pásky při balení a lepení krabic. Model je navržen pro běžné typy lepících pásek - průhledné PP, papírové a všechny s vnitřním průměrem 75mm a maximální šírkou 50mm. Lepící pásku…
This is a cover for the safe transmission of the razor blade knife, that you may download here: https://www.printables.com/cs/model/223159-razor-blade-knife . This is printed from ABS without the supports.
Medal for my PETs. It is possible to print it as two colors medals. For the printer, that no supports command M600 for the filament change is it possibility use the command G4 S60, that pause print for 60 seconds (when you set it to…
This model is a drill for soft vegetables. With this tool you can make a spiral from cucumber, potatoes etc. Printed material : PETG or PLA Supports: Yes Enjoy it!
WC funnel is a little improvements of your WC. Used it to fill a WC reservoir with a desinfektion (e.g. Savo) or a fragrant liquid. It is mounted to a hole of WC reservoir on the second side as a water filling tube. So is it possible to…
Carousel for a small toys or small figures. I inspired on the page https://www.printables.com/cs/model/335540-ferris-wheel/files , but all model is my work. The composite model is about 30 cm hight, but it is possible to print it on the…
A simple travel box for tea bags. The inner part of a box is divided to a 6 parts. In one of parts is possible to place a sugar or a tea leaves. Two teaspoons will also fit in a box (see pictures). This box with a tea bags may be a nice…
EN: Anti rain mobile phone cover , designed to be attached to backpack straps. Easy insertion and removal of the mobile phone, easy handling even with a backpack on the back. The small eyelets on the sides are used to connect the lid to…
I made a centre storage tray bottom for Kia Ceed (CD). It may be combined at the same time with upper storage tray, where I was inspired, available at: https://www.printables.com/model/126565-kia-ceed-cd-centre-storage-tray-console or…
English Fan holder for KP3S printer is projected to easy print print. This model has two variants - with or without pad under BLTouch. In any models of KP3S is necessary to use the pad to optimal settings of BLTouch from bed. You must try…
Ozdoba na vánoční stromek. Možno vytisknout z libovolného materiálu. Tisknout se dá bez podpěr.
EN: Pool filtration for filter 79 mm. Inner hole has thread ½ ‘’. Thread at the end of filtration is ¾ ‘’. Printing: without supports Filament: PETG CZ: Filtrace bazénu na filtr o průměru 79 mm. Vnitřní závit je klasický ½ ‘’. Závit na…
This is a model of Iveco box handle, but it is possible use it for the other trucks. I printed it from ABS for a good strength.
English: Lid on a jar of lemonade with diameter 71mm and other with a stopper on the top. In the top is possible insert a straw for the kids. If any straw is not inserted, insert on the top a stopper to prevent climbing any insect into…
To wszystkie aktualnie dostępne wyniki.
