P
Printableshadessuk
CR2450 Coin Battery holder
Remix of MilStrata Manufacturing's CR2032 battery holder to hold CR2450 batteries. Thanks to RetroGameRevival for the Fusion360 wrangling.
- Pobrania
- 298
- Polubienia
- 21
- Ocena
- 5
Wszystkie modele
Liczymy pasujące modele…
P
Printableshadessuk
Case for Greaseweazle v4 and 3.5" floppy drive
Parts Knurled brass threaded inserts: 8 x M3x5 (for the case) 4 x M2x5 (for the Greaseweazle) Bolts: 8 x M3x10 hex (for the case) 4 x M2x4 hex (for the Greaseweazle) 4 x M3x5 Phillips (to mount drive) To complete the device, you will also…
- Pobrania
- 231
- Polubienia
- 20
- Ocena
- 4,67
P
Printableshadessuk
Multi-coloured Fillet Gauges
2 sizes of fillet gauges modified to be printed in colour on a BambuLab AMS.
- Pobrania
- 124
- Polubienia
- 13
- Ocena
- 0
P
Printableshadessuk
iPhone 12 / 12 Pro Case - 15x15cm variant
This is the same as chttrs's variant with the top wall thinned to fit on a 15x15cm build plate. Be careful inserting the phone, or the sides are likely to shear off. This is a problem with the original model as well, so caveat emptor.
- Pobrania
- 100
- Polubienia
- 8
- Ocena
- 0
P
Printableshadessuk
Hard Drive Magnet Mount - More Magnet Shape Remix
A good way to neodymium magnets harvested from hard disks. In one of the photos, you can see around a pound of paper being help by a pretty chunky paperclip held by a single hard disk magnet. I would recommend printing those in a dark…
- Pobrania
- 98
- Polubienia
- 13
- Ocena
- 0
P
Printableshadessuk
Shell for Famicom Everdrive N8, with USB port
This is a snap-shell for the Famicom Everdrive N8 with a hole for the optional, user-installed, USB port. There's some information about installing the USB port on the Krikzz forum . The tools to use the USB port are linked from the…
- Pobrania
- 97
- Polubienia
- 8
- Ocena
- 5
P
Printableshadessuk
Upright iFixit Screwdriver Set Holder
Makes the iFixit screwdriver set much more accessible than when stored upright with the lid on, and take up less space than when stored flat & open. There's a large open space in the back for more storage, to add weight, or store the…
- Pobrania
- 78
- Polubienia
- 11
- Ocena
- 0
P
Printableshadessuk
Window Blind String/Winder Lock
Lock the string of a window blind by wrapping it around this locking mechanism. It's a replica of an original part installed in a motorhome. Optionally remove the countersink hole for the wood screw by setting with_countersink to 0 and…
- Pobrania
- 42
- Polubienia
- 9
- Ocena
- 5
P
Printableshadessuk
IKEA Alex drawer models (Large/Small)
3D models of Large and Small IKEA Alex drawers, for remixing, CNC'ing, laser cutting, etc. replacement parts.
- Pobrania
- 32
- Polubienia
- 5
- Ocena
- 5
P
Printableshadessuk
Storage for the MaAnt D1 / MaAnt D2 Mini Drill/Grinding Pen - 15cm max
Storage for the MaAnt D1 / MaAnt D2 Mini Drill/Grinding Pen, fits in a 15x15cm printer. Will only fit the fine tips in this holder, as you can see in the photo, otherwise the model would be too long to print. Prints with no supports.
- Pobrania
- 32
- Polubienia
- 2
- Ocena
- 0
P
Printableshadessuk
IO Shield for ASRock Z370M-ITX AC
Simple IO shield for the ASRock Z370M-ITX AC. Default print options, no supports.
- Pobrania
- 31
- Polubienia
- 1
- Ocena
- 0
P
Printableshadessuk
IO Shield for MSI MPG Z390I Gaming Edge AC
Simple IO shield for the MSI MPG Z390I Gaming Edge AC motherboard. Default print options, no supports.
- Pobrania
- 29
- Polubienia
- 1
- Ocena
- 0
P
Printableshadessuk
Extra-Large and Light Ruler-based Calipers
Calipers made with flat metal rules are great, but what happens if you want measure something that's more than a couple of centimeters in depth, such as vases, pots and bottles. Well, you extend the heck out of it! Print one of each…
- Pobrania
- 29
- Polubienia
- 10
- Ocena
- 0
P
Printableshadessuk
Inner Radius Gauge / Fillet Gauge 1mm - 18mm - Multicolour for Bambu AMS
These 6 gauges let you measure radiuses from 1 to 18mm. PLA with 0.2mm layer height will be fine, so a different one for the values. I recommend a light color for the fillets. Ring is the number 7 circle ring available on this page . The…
- Pobrania
- 23
- Polubienia
- 5
- Ocena
- 0
P
Printableshadessuk
Metal Rack Wall Spacer
Model is parametric editable in OpenSCAD, no directly printable models are provided as each rack is likely to be unique enough that it wouldn't match my own.
- Pobrania
- 22
- Polubienia
- 3
- Ocena
- 0
P
Printableshadessuk
Numatic Henry Tube Dock aka “Wand Dock Drum Socket”
If your Numatic vacuum cleaner has a tube clip, you can print this to have the tube always stand upright against the wall. Prints flat against the bed with no supports. I coupled this with a gardening tool handle grip at the top of the…
- Pobrania
- 20
- Polubienia
- 2
- Ocena
- 0
P
Printableshadessuk
Light diffuser for G14 decorative lamp
Replacement light diffuser for G14 decorative lamp. This replaces the original glass diffusers that were used along with halogen G14 bulbs. I would strongly advise replacing those G14 halogen bulbs with LED ones. In the cover photo, the…
- Pobrania
- 19
- Polubienia
- 1
- Ocena
- 0
P
Printableshadessuk
Thomson TO8D Wall Mount
Wall mount for the Thomson TO8D 8-bit computer. It might also work with Apple IIs, or other chunky computers. For thinner 16-bit computers, see LeeF's original model.
- Pobrania
- 15
- Polubienia
- 0
- Ocena
- 0
P
Printableshadessuk
Jakks Pacific / Lansay Namco Plug'n'Play Battery Door
Note that a few models of those plug'n'play exist, and that the door might not fit your model. Print in matching colour, with supports enabled.
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
Printableshadessuk
LiPo Battery Fireproof Storage Bag Shaper
The LiPo fireproof bag I ordered came in folded, and didn't look like it wanted to stay in a square shape, so I printed this shaper/placeholder. Print in draft mode for a quicker print. STEP file provided if you want to turn this into an…
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
Printableshadessuk
MagSafe Night Stand or Shelf Phone Holder
My night stand didn't have any free surface for a fancy MagSafe iPhone holder, so I made one that would screw onto the edge of it. This requires a MagSafe “wall sticker” or “wall holder” (rather than using a rather inefficient wireless…
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
P
Printableshadessuk
Nintendo Wii Nunchuk Strap Hook
Replacement part for what Nintendo calls the “connector hook”, the transparent part on accessories that plug into the Wiimote's “External Extension Connector”. Most well calibrated printers should be able to print this without supports,…
- Pobrania
- 9
- Polubienia
- 2
- Ocena
- 0
P
Printableshadessuk
Apple PowerBook 1400/1400c/1400cs Bottom Case Latch
The drive and battery bay latches on the bottom of the PowerBook 1400 are very brittle, and prone to breaking. Print them yourself at home, and never run out! Equivalent to replacement Part 922-3304: Latch, Bottom Case, PB 1400 Print…
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
Printableshadessuk
Brass Chested Drawers Handle
This model replaces the Bakelite part of a brass and Bakelite handle for a art deco chested drawers. Printed upright with supports only inside the rod insert, the screw hole seems to have printed fine using bridging. Use with some 6mm…
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
Printableshadessuk
Gridfinity Adhesive Roll Spindle
3x3 gridfinity plate that fits most household-type adhesive rolls. Max inner diameter for the rolls is 72mm.
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
Printableshadessuk
SCS Sentinel WDP-200 Video Intercom Replacement Faceplate
The faceplate/lens cap on the SCS Sentinel WDP-200 Video Intercom gets cloudy and yellows over time. The faceplate is stuck on with adhesive foam, so should be easy to remove by pushing from the back of the unmounted intercom. This…
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
Printableshadessuk
Edenwood Portable DVD player lid switch
Less than a gram of filament to fix the lid switch of your Edenwood portable DVD player not registering. The object is so small that it's not showing in the photos for this model. There's a tiny hole to the top right of the DVD…
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
Printableshadessuk
Luggage Name Tag Repair/Part
Design or repair a luggage name tag. 2 model variants, one with a strap hole, and another without it for you to create in your slicer. Prints without supports, PETG recommended but PLA will do, glue with contact glue (don't forget to mask…
- Pobrania
- 3
- Polubienia
- 1
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.