Liczymy pasujące modele…
This is a scalpel handle model (12 cm long). Be careful not to cut yourself when inserting the blade into the handle. To secure the blade, I recommend using a screw approx. M2x5 mm, for which a hole is prepared there. (It is not a…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
Box for NVR (network video recorder) bought on Aliexpress. It is divided into two parts, one for the NVR itself and the other for the 3.5" HDD. Printing without supports, Infill: 15-20%. Share your printed model.
Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu
Rammstein logo keychain, Ideal for two-color printing. Printing without supports, Infill: 10%. Share your printed model.
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Holder for angle grinder discs. The discs are stored in two rows, the maximum disc size is 125mm. The holder is ideally attached with 4mm screws. Printing without supports, Infill: 10%. Share your printed model.
Wydruk około 3,95 €–4,83 € nettoWstępna wycena jednego wariantu
There are two variants of the logo to choose from. www.yaesu.com Printing without supports, Infill: 15%. Share your printed model.
Wydruk około 1,77 €–2,16 € nettoWstępna wycena jednego wariantu
The Walking Dead - Rick and Negan Printing without supports, Infill: 100%, Brim. Share your printed model.
Wydruk około 1,58 €–1,93 € nettoWstępna wycena jednego wariantu
sparta.cz Change layer in PS: Printing without supports, Infill: 15%. Share your printed model.
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
Motorola logo intended for two-color printing. Printing without supports, Infill: 10%. Share your printed model.
Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu
The Walking Dead Printing without supports, Infill: 100%, Brim. Share your printed model.
Wydruk około 2,60 €–3,17 € nettoWstępna wycena jednego wariantu
This is a 3D model of the Gothic church of St. Voršila in Chlumec nad Cidlinou. The church is divided into 9 parts that need to be glued together. It is also advisable to color it as in the picture. I am also attaching the church without…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
en.qsfj.com Printing without supports, Infill: 15%. Share your printed model.
Wydruk około 1,62 €–1,98 € nettoWstępna wycena jednego wariantu
REBEL logo www.hbrebel.cz Printing without supports, Infill: 15%. Share your printed model.
Wydruk około 3,88 €–4,74 € nettoWstępna wycena jednego wariantu
To connect the left and right parts you need: 3x M3 nuts and 3x M3x30 screws The entire bracket is then secured with one M3x18 screw and an M3 nut (the screw is inserted into the hole where the LCD display holder was originally) I…
Wydruk około 16,68 €–20,39 € nettoWstępna wycena jednego wariantu
Stand for Afedri SDR. It includes a case for the stylus. afedri-sdr.com Printing without supports, Infill: 15-20%. Share your printed model.
Wydruk około 7,06 €–8,63 € nettoWstępna wycena jednego wariantu
This is a holder model for 3DLAC and IPA. The holder is attached using three 5 mm screws. Printing without supports, Infill: 15%. Share your printed model.
Wydruk około 18,54 €–22,66 € nettoWstępna wycena jednego wariantu
Jan Žižka Printing without supports, Infill: 100%, Brim. Share your printed model.
Wydruk około 1,89 €–2,30 € nettoWstępna wycena jednego wariantu
A remix that from the original bottle opener model with a Yorkshire handle created only a Yorkshire without an opener.
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
LED light sign of Pardubice hockey club HC Dynamo. Printing without supports, Material: PLA, Infill: 15%, Wall: 2 Share your printed model.
Wydruk około 1,38 €–1,69 € nettoWstępna wycena jednego wariantu
CZE Jedná se cedule které ukazují základní nastavení sliceru a tisku. Konkrétně se jedná o hustotu výplně v %, kde je znázorněna výplň od 0% do 100%. Dále vzor výplně, kde je znázorněn jednotlivé styly výplní (PrůšaSlicer). A jako…
Wydruk około 1,05 €–1,29 € nettoWstępna wycena jednego wariantu
This is a DIN rail mount for the Teroz ADS-B amplifier ( www.teroz.cz ). Use M3x8 mm Allen screws to connect the powder and the DIN mounts. The amplifier itself is attached using a Velcro cable tie for which there is a hole. Or it is…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wall or table mounting bracket for Verbatim HDD case (4 pieces required for proper mounting) Printing without supports, Infill: 15-30%. Share your printed model.
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
This is a 3D printed case for the 2-pin jack of the Kenwood standard, which is used by almost every hand-held amateur radio. Ideal for various applications where custom connector manufacturing is required. This one is used as the…
From the original model, this one is modified so that it does not use the printed screw and nut, but is modified so that the classic M4x30 mm hexagon head screw and also the M4 nut are used. Deflector is unchanged from the original model.…
When starting my own cache, i modeled my own geocoins for this for the first three finders of the cache. If you want to add the ID of your cache to the coin, ideally use PrusaSlicer 2.6 alpha or your favorite CAD program (a STEP file is…
This is a cutlery organizer for the kitchen drawer. The organizer is designed to accommodate a large number of cutlery. It consists of four parts and to print it you need a printer of at least 25x21 cm, such as the MK3S. The printed parts…
Case for 18650 Battery Tester ( Aliexpress.com ). You will need 8 pieces of M3x10 mm. Printing without supports, Infill: 15%, Material: PET-G Share your printed model.
Wemos D1 mini microcontroller housing that was modeled for the long header that comes with Wemos (one side is male and the other is female), but it should work for a regular header as well. The case has a hole for pressing the reset…
When setting up my first cache, I printed a template for this purpose, using which I sprayed the geocaching logo on the wooden box in which the cache was placed. Printing without supports, Infill: 15%. Share your printed model.
This is a 3D model of the HAKKO T12 soldering station ( Aliexpress.com ), which is powered by a Makita battery. You will need M4x10mm screws on one side and M5x30mm screws on the other side. Printing with supports, Infill: 50%. Share your…
Box for RF Bias Tee to RTL-SDR To Purchase ( Aliexpress.com ) Printing with supports, Material: PLA, Infill: 15%, Wall: 2 Share your printed model.
This is a clock project using Wemos D1 mini and Max7219 LED matrix display. And all this twice, so that I can monitor the time in both UTC and CET time at the same time. The whole project requires programming via the Arduino IDE (the code…
This is the cheapest way to get affordable solder (approx. 15 EUR). You can buy the kit here ( aliexpress.com ). Once the kit is in place, you can print the box with the stand. Insert the solder PCB board into the box, the opening in the…
A simple way to cover the pins on the XT60 connector to prevent unwanted pin connections. Printing without supports, Infill: 20%. Share your printed model.
This is a DIN rail mount for the RTL-SDR dongle. Use M3x8 mm Allen screws to connect the DIN mount and RTL-SDR holder. The dongle itself is attached using a Velcro strap, for which there is a hole. Printing without supports, Infill: 30%.…
This is a case for the FTDI adapter, which has been adapted from the original for fixed mounting, and is generally simplified with all the text. The case is not designed for switching between 3v3V and 5V, but also the connection of the…
Holder for 3.5" HDD disk that is inserted instead of the original CD/DVD drive. There is no need to screw the disc, I just recommend inserting cardboard to dampen the disc at high speeds as seen in the photo. Printing without supports,…
Cedule hlavní město Praha Printing without supports, Infill: 20%. Share your printed model.
This is an outdoor Meshtastic installation. The 3D model consists of a part of the antenna holder and a part of the insert into the installation box. My installation consists of a Heltec Wireless Stick Lite, a Li-Ion battery charging…
A case for the MMDVM hat and Raspberry Pi Zero for your digital hotspot. The components below are needed to build it. Parts List Raspberry Pi Zero ( aliexpress.com ) MMDVM hat ( aliexpress.com ) OLED 1.3" display ( aliexpress.com ) Toggle…
Printing without supports, Infill: 15%. Share your printed model.
Case for LED Matrix and Wemos D1 mini, which is ideal for creating clocks. Code to upload to Wemos, I can recommend this project for example github.com , or if you want a project translated into Czech, I can recommend my own fork…
A simple internet radio for your Raspberry Pi. The entire radio assembly is of course made up of the RPi microcomputer (the program is not demanding, the recording version should be enough for it to run). You also need a 2x20 line LCD…
Cedule Zákaz zastavení Printing without supports, Infill: 20%. Share your printed model.
Minimalist case for Heltec LoRa32 V2/V3 Compatible with Heltec LoRa32 V2 and V3 boards Space for a battery up to 30 × 50 × 20 mm (see the last gallery photo) Perfect for MeshCore and Meshtastic projects Integrated mount for a standard…
This is a model that allows you to screw the place of the original light on the arm, for example a ring light or any light or accessory that has a tripod screw. There are two models in the files, one is for versions with control and only…
Holder for 80mm FAN on DIN rail. The FAN holder is available in two variants of internal width (20.5 and 26 mm). The DIN rail holder is also available in two variants (Direct and Angular 45°). To connect the DIN holder and the FAN holder,…
ADS-B LNA filter case. You will need 6x M3x8 mm. Printing with supports, Infill: 15% Share your printed model.
This is a model for the L and R front and center speakers of the Samsung home theater. But of course it is possible to use it on other speakers that are similarly large. The holder is attached to the wall or ceiling with four screws…
A simple form to fill with dough for your cookies, which you let harden in the fridge. The mold has notches on it to help divide the rolls. The mold is available in variants of 4 and 8 pieces. Printing without supports, Infill: 15%. Share…
Enclosure for the Vaisala RS41 radiosonde while retaining the original AA battery holder. The enclosure provides access to the 10-pin connector, allows the button to be pressed, and makes battery replacement quick and convenient. Share…
To wszystkie aktualnie dostępne wyniki.
