Liczymy pasujące modele…
Copycat of HORL sharpening system, easy to print, no supports. Printed in PLA, infill at your choice, in my case all has 15% gyroid, 3 perimeters. Orings best in TPU hardness 95A, really good fit and no mess to install. Parts are oriented…
small thumb palette, for small hands. in 3mf model added a modificator piece for ironing. 4 lids print with 0.4mm nozzle, 0.30mm layer, infill 10%, flow 0.65mm, ironing in lids only. time to print in Kingroon KP3S only 51 min.
Printed in FDM, 0.12mm with 0.25 nozzle. supports required, can be printed in one pice. Can be printed with 0.4 nozzle, but need more work to get a good surface for priming and painting Add glue to the boty and then put glitter.
Print in PETG food safe. layer 0.2mm, infill 20%. Model is very similar as sold in aliexpress but this one can be print as your preferred size, in original size can hold a 10cm diameter onion.
use 1.75 filament for pin
Easy print on 0.20mm layer. Best in PETG, can be printed in PLA. no support required. Fusion360 model for your convenience
quoridor game, inspired in asmodee board game. All printed in PLA. Figures in 0.08 layer and no need to use supports, perhaps brim. box included, can store 11x11 board and all figures, if you need box for 9x9 or customize, you can do…
Hello everyone, I bring you a project that I have done to host a spectacular clock and to enjoy it anywhere, in particular the work office. The model is practically 1:1, with some aesthetic changes, especially in the dial to use a mix…
Taylor Swift funko, print in 0.12mm supports required. Printed in FDM, 0.12mm with 0.25 nozzle. supports required, can be printed in one pice. Can be printed with 0.4 nozzle, but need more work to get a good surface for priming and…
Print stand with supports for the base. 0.12 mm layer
Laptop riser for Lenovo Legion Gen 5. Easy to print, 3 perimeters, 15% infill, any filament can be used.
jibbit for crocs, need supports, printed in 0.2mm PLA.
Modeled figures for the board game Stuffed Fables, Stuffed Fables. Made in blender, taking as a model the images from the internet, so they are not scanned. more than 100 hours of work to give life to the game, or to replace any missing…
Best printed in PETG. Model shown printed in 0.30mm layer height, 0.65 extrusion width, nozzle 0.4mm, infill 5-10% cover must be printed with supports.
tray and pin can be printed in 0.4mm nozzle, 0.20 layer, and 15% infill wheels can be printed in 0.4mm, but better with 0.25mm nozzle, better detail and finish, add filament change for better finish or paint it.
Here's my proxy model for The King from the board game, King of Tokyo! I put the model on a 50 mm base, which fits perfectly in the Tokyo or Tokyo Bay circles on the board =) obj model and stl, needs supports, I printed using 0.4mm nozzle…
Here's my proxy model for Pandakai from the board game, King of Tokyo! I put the model on a 50 mm base, which fits perfectly in the Tokyo or Tokyo Bay circles on the board =) obj model and stl, needs supports, I printed using 0.4mm nozzle…
Here's my proxy model for Pandakai from the board game, King of Tokyo! I put the model on a 50 mm base, which fits perfectly in the Tokyo or Tokyo Bay circles on the board =) obj model and stl, needs supports, I printed using 0.4mm nozzle…
Calibrador de la cama Kingroon, se puede usar en cualquiera de los dos lados según comodidad del usuario una vez posicionada la cama en una esquina para calibrar, desplazamos mejor manualmente la cama a las siguientes esquinas debido a la…
Diseñado para mesa ABS de jardín. Imprimir en PETG para obtener flexibilidad. Si se imprime en PLA la pinza es mucho mas rigida Incluyo el archivo de Fusion360 para que podais modificarlo a vuestras necesidades. Designed for ABS garden…
new version v2 Redesigned and improved. Now fits all possible manufacturer's diameters, as no two are alike. The swivel mechanism has been adjusted to be backlash free, and the initial swivel is effortless. Printed in PLA, layers 0.20 and…
Printing in any material, can be resized to demand. 80 mm is only 3.29 meters, so you can resize up to 98 mm diameter, mantaining 2.5mm height Ironing used for a better finish. Printed in PLA 0.32 layer, 0.4 nozzle.
Print in PETG or PLA, supports needed.
print in 0.2 layer, Can use gopro accesories, and ideal for short cables ti comes from bottom instead of top, also this prevents need to flip image.
Indi Keychain - Atletico de Madrid Mascot (Multi-Color / Single Color) Bring your keys to life with this adorable 3D-printed keychain! I designed this model to be perfect both for users with multi-color systems (like AMS) and for those…
This cover can be made in PETG, TPU or you can mix PETG and TPU, is rock solid Printed with 0.6 nozzle, 0.3mm layer height. Pause in layer 3 and change PETG for TPU
To wszystkie aktualnie dostępne wyniki.
